19938: boards/stm32l496g-disco: enable ST7789 display and touch panel r=benpicco a=gschorcht
### Contribution description
This PR enables the ST7789 display and the touch panel for the `stm32l496g-disco`.
The PR requires PR #19937.
### Testing procedure
```
BOARD=stm32l496g-disco make -j8 -C tests/drivers/st77xx
```
should work.
### Issues/PRs references
Depends on PR #19937
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19937: drivers/lcd: add MCU 8080 16-bit parallel mode support r=benpicco a=gschorcht
### Contribution description
This PR adds the 16-bit support for MCU 8080 parallel mode for LCD driver ICs.
### Testing procedure
Use either PR #19938
```
BOARD=stm32l496g-disco make -j8 -C tests/drivers/st77xx
```
or #19939 on top of this PR to test.
```
BOARD=sstm32f723e-disco make -j8 -C tests/drivers/st77xx
```
### Issues/PRs references
Prerequisite for PR #19938 or PR #19938
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19927: sys/shell/ping: fix ping packet size overflow r=miri64 a=krzysztof-cabaj
### Contribution description
In #19829 `@mchesser` point out integer overflow in the ```ping``` command and API. This PR fix this issue in two ways:
1) Add protection in the API.
2) Add protection in the user command.
### Testing procedure
Without this PR passing negative number to the ```ping -s``` option cause segmentation fault, for example in the
```example/gnrc_networking```:
```
> ping -s -7 ::1
ping -s -7 ::1
Segmentation fault
```
With this PR user shows appropriate warning test:
```
> ping -s -7 ::1
ping -s -7 ::1
ICMPv6 datagram size should be in range <0, 65527>.
>
```
### Issues/PRs references
Issue #19829
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
19914: boards: complete SD Card MTD definition for several bords r=benpicco a=gschorcht
### Contribution description
This PR completes the MTD definition for the following boards:
- `seeedstudio-gd32`
- `sipeed-longan-nano` including `sipeed-longan-nano-tft`
- `waveshare-nrf52840-eval-kit`
- ESP32x boards that have an SPI SD Card interface and use `mtd_sdcard_default`
### Testing procedure
Green CI
### Issues/PRs references#19465
Prerequisite for PR #19465
19915: drivers/lcd: support MCU 8080 8-bit parallel mode r=benpicco a=gschorcht
### Contribution description
LCD driver ICs usually support
- SPI serial mode,
- MCU 8080 8-bit parallel mode and
- MCU 8080 16-bit parallel mode.
This PR extends the LCD display driver API to support the MCU 8080 8-/16-bit parallel modes and implements a GPIO-driven MCU 8080 8-bit parallel mode.
The following features are already working locally and will be provided as follow-on PRs for which this PR is a prerequisite.
- GPIO-driven bit-banging implementation of the 16-bit mode of the MCU 8080 parallel interface
- Enabling the display on `stm32f723e-disco` and `stm32l496g-disco` using the feature above
- Definition of a low-level API for the parallel modes using the LCD controller of the MCU
- Using FMC for the display on `stm32f723e-disco` and `stm32l496g-disco`
- Using LCD controller for the display of `esp32-wt32-sc01-plus` (PR #19917)
### Testing procedure
The PR can be tested with PR #19917 on top of this PR.
```
BOARD=esp32s3-wt32-sc01-plus make -j8 -C tests/drivers/st77xx flash
```
The following video shows the test.
**Please note** The test is pretty slow because the display has 480 x 320 pixels and the MCU 8080 8-bit parallel interface is realized by a GPIO-driven bit-banging implementation where each GPIO of the data bus is set separately. A follow-up PR will use the ESP32-S3 LCD controller and DMA for this board. This PR just defines the extension of the driver by the parallel interface and provides the bit-banging implementation for MCUs that don't have a LCD controller on chip.
https://github.com/RIOT-OS/RIOT/assets/31932013/c1e3e3d7-05d9-4ca5-8fff-9a5eaca50fba
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19919: drivers/st77xx: introduce rotation defines r=benpicco a=gschorcht
### Contribution description
The PR introduces counterclockwise rotations for the definition of parameter `ST77XX_PARAM_ROTATION`.
It is more intuitive and universal to use `ST77XX_ROTATION_{0,90,180,270}` instead of `ST77XX_ROTATION_{ST77XX_ROTATION_{VERT,VERT_FLIP,HORZ,HORZ_FLIP}`, especially because the orientation of the display may vary with respect to the orientation of the board.
### Testing procedure
`tests/drivers/st77xx` should still work, for example:
```
BOARD=adafruit-pybadge make -C tests/drivers/st77xx flash
```
```
BOARD=esp32s3-usb-otg make -j8 -C tests/drivers/st77xx flash
```
### Issues/PRs references
19931: boards: fix documentation for GD32V boards and doxygen 1.9.4 r=benpicco a=gschorcht
### Contribution description
This PR fixes some small problems in documentation of `sipeed-longan-nano`, `sipeed-longan-nano-tft` and `seeedstudio-gd32` for doxygen 1.9.4 that is used on `doc.riot-os.org`.
Doxygen version 1.9.4 doesn't like anymore
- single double quotes as symbol for the inches unit in the text
- line breaks in `[]()` to avoid exhausting the 100 characters per line.
See https://doc.riot-os.org/group__boards__sipeed__longan__nano.html for example.
Doxygen 1.9.1 which is part of `riot-docker` container didn't have theses problems 😟
### Testing procedure
Documentation should be fixed.
### Issues/PRs references
19935: boards/nucleo64: fix SPI Arduino mapping for most boards r=benpicco a=maribu
### Contribution description
Before, the Arduino SPI mapping for all Nucleo-64 boards was incorrect. With this, the situation improves to the following:
- [x] nucleo-f030r8
- [ ] nucleo-f070rb
- No SPI buses provided.
- [x] nucleo-f072rb
- [x] nucleo-f091rc
- [x] nucleo-f103rb
- [ ] nucleo-f302r8
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-f303re
- [x] nucleo-f334r8
- [x] nucleo-f401re
- [x] nucleo-f410rb
- [x] nucleo-f411re
- [x] nucleo-f446re
- [x] nucleo-g070rb
- [x] nucleo-g071rb
- [x] nucleo-g431rb
- [x] nucleo-g474re
- [x] nucleo-l053r8
- [x] nucleo-l073rz
- [x] nucleo-l152re
- No SPI bus at D11, D12, D13 provided
- [x] nucleo-l452re
- [x] nucleo-l476rg
- [x] nucleo-wl55jc
The remaining offenders still need to be fixed, but that is better done one PR at a time.
### Testing procedure
- Check if the SPI device provided in the given `boards/<BOARD_NAME>/incude/periph_conf.h` is indeed `SPI_DEV(0)`, or in `periph_conf.h` the correct SPI dev is found
- this should be fine for all boards above, except for the unchecked ones
or:
- run https://github.com/RIOT-OS/RIOT/pull/19932: The SPI test should pass now
### Issues/PRs references
Bug found in https://github.com/RIOT-OS/RIOT/pull/19932#issuecomment-1726305437
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
For the parallel interface support the following changes were made:
1. Additional `lcd_*` pseudomodules are defined to control whether SPI serial or MCU 8080 8-/16-bit parallel interface is used.
2. The low level function implementation was extended for parallel interfaces so that the now can use either the SPI serial interface or the MCU 8080 8-/16-bit parallel interface.
Using the `lcc_*` modules, either the SPI serial interface or the MCU 8080 8-/16-bit interface or even both for multiple display can be used simultaneously.
19933: examples/gcoap: add saml11-xpro to CI boards with insufficient memory r=miri64 a=krzysztof-cabaj
### Contribution description
Bors run for PR #19927 reveals that ```examples\gcoap``` do not fit in saml11-xpro board.
I checked and this same linker error also appears on current master branch.
This PR add sampl11-xpro board to the Makefile.ci BOARD_INSUFFICIENT_MEMORY list.
### Testing procedure
See logs from bors https://ci.riot-os.org/details/073c5dadc6ba4bc8a613edb78a1a4a2d
### Issues/PRs references
PR #19927
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
