benpicco
307ece1bf5
Merge pull request #18391 from gschorcht/cpu/esp/fix_netdev_register
...
cpu/esp: fix netdev register
2022-08-02 21:38:24 +02:00
benpicco
e1e99c3bf1
Merge pull request #18108 from benpicco/drivers/dose-rxbuf
...
drivers/dose: make RX buffer size configurable
2022-08-02 10:51:17 +02:00
Gunar Schorcht
14dde4a835
drivers/netdev: add NETDEV_ESP_WIFI type
2022-08-02 09:33:50 +02:00
Gunar Schorcht
184e411355
drivers/netdev: add NETDEV_ESP_ETH type
2022-08-02 09:33:50 +02:00
Leandro Lanzieri
4a3231f763
drivers/kw2xrf: add setup function with global index
...
This index is used to register the network device.
2022-07-11 09:24:59 +02:00
eduazocar
e6a7039de4
drivers/at86rf2xx: Adding Switch SRT to Random Number Generator
2022-07-03 17:44:47 -04:00
Benjamin Valentin
bede0615ad
drivers/mtd: fix doc of mtd_read_page(), mtd_write_page_raw()
...
The function allows for offsets greater than the page size.
2022-06-20 14:59:41 +02:00
Benjamin Valentin
86f55c5637
drivers/slipdev: generate RX event for queued packets
2022-06-17 10:50:31 +02:00
benpicco
cb5e19beb5
Merge pull request #17979 from maribu/drivers/netdev_ieee802154
...
drivers/netdev_ieee802154: drop duplicate struct member
2022-06-02 00:47:56 +02:00
Karl Fessel
6e41c685b2
Merge pull request #17935 from dp1/ir_nec
...
drivers/ir_nec: NEC remote receiver implementation
2022-06-01 13:44:51 +02:00
Dario Petrillo
18f8a476e6
drivers/ir_nec: ir remote implementation
2022-05-31 17:58:39 +02:00
Marian Buschsieweke
16f859dafd
drivers/saul: use const qualifier for data to write
...
This makes life easier when calling e.g. `saul_reg_write()` with data
stored in flash.
As now the signatures for reading and writing differ (in that `const`
qualifier only), `saul_notsup()` is split into `saul_write_notsup()`
and `saul_read_notsup()`. However, one is implemented as a symbol alias
of the other, so that ROM consumption remains unchanged.
2022-05-23 08:35:27 +02:00
chrysn
dc7bc9f854
Merge pull request #17683 from chrysn-pull-requests/mtd-granularity
...
mtd: Introduce write granularity
2022-05-20 11:52:03 +02:00
Aymeric Brochier
09ca09adbf
drivers/sx1280: initial import
2022-05-18 17:06:12 +02:00
Benjamin Valentin
d0ca6294ea
drivers/dose: make RX buffer size configurable
...
To benefit from the chunked ringbuffer if large frames are being sent,
we need to allocate more than one ethernet frame length to it.
Rename the define and make it overwriteable by the user.
2022-05-15 14:43:47 +02:00
Marian Buschsieweke
bae91c1660
Merge pull request #17723 from benpicco/periph_timer_periodic-set_stopped
...
drivers/periph/timer: add TIM_FLAG_SET_STOPPED flag
2022-05-03 12:06:37 +02:00
Marian Buschsieweke
1fd4d41d76
driver/netdev_ieee802154: Make timestamp optional
...
Also remove duplicate struct member.
2022-04-22 14:33:56 +02:00
Marian Buschsieweke
23855e140e
drivers: Add periph/gpio_ll API
...
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2022-04-22 08:39:04 +02:00
56359d6fb1
Merge pull request #17930 from aabadie/pr/drivers/lcd_rotation_rework
...
drivers/lcd: rework rotation management and enable it for st7735
2022-04-21 14:31:49 +02:00
df95c6ca83
Merge pull request #17945 from fjmolinas/pr_mcp2515_cleanups
...
drivers/mcp2515: fixes and cleanups
2022-04-20 10:42:08 +02:00
Francisco Molina
6959f5eb78
drivers/mcp2515: use ztimer
2022-04-20 09:23:50 +02:00
85ba0597f7
drivers/lcd: rework rotation modes and enable it with st7735
2022-04-19 16:22:10 +02:00
646fb1135a
Merge pull request #17925 from aabadie/pr/drivers/lcd_params_rework
...
drivers/lcd: slightly rework params to expose offset values to ili9341 driver
2022-04-19 16:21:42 +02:00
Francisco Molina
cd21bc00da
drivers/candev_mcp2515: set default bitrate to 500kbps
2022-04-19 15:56:45 +02:00
63b25483c9
Merge pull request #17921 from aabadie/pr/drivers/disp_dev_coordinates
...
drivers/disp_dev: use struct to store display area coordinates
2022-04-19 12:48:12 +02:00
a2fc925a0e
drivers/cst816s: add touch_dev interface
2022-04-14 11:31:35 +02:00
81cf5dba53
drivers/lcd: apply offset parameters to ili9341
2022-04-13 12:55:16 +02:00
36211f3fae
drivers/disp_dev: use struct to store display area coordinates
2022-04-13 12:49:58 +02:00
Francisco Molina
c5cc2966ff
drivers/ili9341: use common lcd driver
2022-04-12 12:39:00 +02:00
Francisco Molina
827fa976a6
driveres/st7735: add driver based on common lcd driver
2022-04-12 12:38:59 +02:00
Francisco Molina
8f2fa772e9
drivers/lcd: add common driver for lcd display
2022-04-12 12:35:02 +02:00
chrysn
5221ce278e
Merge pull request #17860 from Ollrogge/deprecate_flashpage
...
periph/flashpage: deprecate *_free functions
2022-03-31 20:42:01 +02:00
Ollrogge
4974790bad
periph/flashpage: deprecate *_free functions
2022-03-31 17:59:54 +02:00
Ollrogge
a834cc9acf
periph/flashpage: activate FLASH_WRITABLE_INIT documentation
2022-03-31 17:59:44 +02:00
chrysn
52ea93ef03
drivers/mtd_mapper: Add write_size
2022-03-31 10:58:52 +02:00
chrysn
882f76ab01
drives/mtd_flashpage: Configure write_size in MTD device
2022-03-31 10:52:34 +02:00
chrysn
9ec42492da
mtd: Introduce write_size, setting no-rewrite policy
...
... with flags defining more clearly which kinds of overwrites are OK
Co-authored-by: benpicco <benpicco@googlemail.com>
2022-03-31 10:50:30 +02:00
chrysn
df9226fb80
mtd doc: Editorial fix
2022-03-31 10:50:30 +02:00
Benjamin Valentin
d800cca1c3
drivers/atwinc15x0: register with netdev
2022-03-30 16:07:29 +02:00
benpicco
1133d04de1
Merge pull request #17813 from leandrolanzieri/pr/tests/eth_drivers_rework
...
tests: rework eth drivers
2022-03-28 18:15:27 +02:00
Gunar Schorcht
753b435cb5
Merge pull request #17854 from benpicco/drivers/atwinc15x0-sleep
...
drivers/atwinc15x0: enable sleep state
2022-03-25 16:43:27 +01:00
Francisco
a10b1572aa
Merge pull request #17627 from benpicco/mtd_flashpage_t
...
drivers/mtd_flashpage: add mtd_flashpage_t type
2022-03-25 16:24:04 +01:00
Benjamin Valentin
b28738c11c
drivers/atwinc15x0: enable sleep state
...
This allows the interface to enter SLEEP state in which it only
consumes 4µA.
2022-03-24 14:04:53 +01:00
Leandro Lanzieri
a2e5934ec9
drivers/encx24j600: introduce setup function with index
2022-03-24 09:32:10 +01:00
Leandro Lanzieri
5f7a906b95
drivers/w5100: introduce setup with index
2022-03-24 09:30:42 +01:00
benpicco
1e66baf94b
Merge pull request #17699 from viktorbatista/shtc3
...
drivers/shtcx: converted the shtc1 driver into shtcx and added shtc3 support
2022-03-18 14:05:42 +01:00
benpicco
82b0e08745
Merge pull request #10082 from gschorcht/drivers_l3gd20h
...
drivers: add driver for L3GD20H 3-axis gyroscope
2022-03-18 08:10:24 +01:00
chrysn
facb5e633f
Merge pull request #17436 from Ollrogge/reserve_flash
...
cpu: add flash_writable section to linker script
2022-03-17 21:44:32 +01:00
Ollrogge
6ab1fb9a09
periph/flashpage: Add FLASH_WRITABLE_INIT macro
2022-03-17 19:46:00 +01:00
Gunar Schorcht
1569299c92
drivers: support for ST L3Gxxxx 3-axis gyroscope family
2022-03-17 18:34:57 +01:00
Vic
e18557f9c4
drivers/shtcx: integration of shtc3 sensor
2022-03-10 21:35:25 +01:00
Vic
07531cdecd
shtc1->shtcx: renamed files
2022-03-10 14:47:34 +01:00
a3fc5c1d17
Merge pull request #17697 from viktorbatista/drivers/lps22ch
...
driver/lpsxxx: adding lps22ch support
2022-03-09 21:28:11 +01:00
Vic
947efa7d65
driver/lpsxxx: adding lps22ch support
2022-03-09 15:23:51 +01:00
Benjamin Valentin
3d252bfba3
drivers/periph/timer: add TIM_FLAG_SET_STOPPED flag
2022-03-01 13:45:01 +01:00
benpicco
6cfbec4f8e
Merge pull request #10518 from gschorcht/drivers_mcp47xx
...
drivers: support for Microchip MCP47xx DAC devices added
2022-02-26 22:13:41 +01:00
Fabian Hüßler
66a7a0a065
drivers/periph: add VBAT interface
2022-02-20 13:43:19 +01:00
Francisco
e58af6a876
Merge pull request #17619 from benpicco/drivers/mtd_sdcard-unaligned
...
drivers/mtd_sdcard: support unaligned reads & writes
2022-02-17 10:09:06 +01:00
chrysn
b832bb1224
mtd doc: Add overview defining terms; link modules
...
Contributes-To: https://github.com/RIOT-OS/RIOT/issues/17663
2022-02-16 16:25:01 +01:00
Jens Wetterich
4dfeafcabd
cpu/native/netdev_tap: Add to netdev_register
2022-02-11 07:54:11 +01:00
benpicco
c423148bbc
Merge pull request #17608 from benpicco/drivers/ethos-standalone
...
drivers/ethos: fix build without ethos_stdio
2022-02-10 13:07:11 +01:00
benpicco
be45400631
Merge pull request #17341 from benpicco/vfs-mtd_cleanup
...
sys/vfs: add file-system auto-mount
2022-02-09 21:50:34 +01:00
Benjamin Valentin
2fe41b1b40
drivers/mtd_flashpage: add mtd_flashpage_t type
2022-02-08 17:13:30 +01:00
Benjamin Valentin
91ca757b9a
drivers/mtd_sdcard: implement erase_sector()
2022-02-07 11:40:27 +01:00
benpicco
effad2e571
Merge pull request #17613 from benpicco/drivers/mtd_spi_nor-microchip
...
boards/same54-xpro: support for board variation with SST26VF064B flash
2022-02-06 18:39:31 +01:00
Benjamin Valentin
67417ce5a9
drivers/mtd_spi_nor: drop addr_width from mtd_spi_nor_params_t
...
This is now always determined at run-time.
2022-02-04 12:17:17 +01:00
Benjamin Valentin
4c282a3a41
drivers/mtd_spi_nor: set address width at run-time
2022-02-04 12:17:17 +01:00
Benjamin Valentin
748e85ed39
drivers/ethos: set defaults for !ethos_stdio
2022-02-04 12:09:19 +01:00
Benjamin Valentin
0695a7e40e
drivers/dose: include board.h
...
`DOSE_TIMER_DEV` is defined in `board.h`, so we have to include it.
It's not included by the header (and should not), so move the check
to the .c file.
2022-02-02 15:38:57 +01:00
Francisco Molina
dc27c080ea
drivers/dose: migrate to ztimer_usec
2022-01-25 08:43:33 +01:00
Benjamin Valentin
70d9f2fb1a
sys/vfs: move mtd_vfs_ops to vfs.h
...
This avoids a cyclic include of mtd.h
2022-01-24 13:53:21 +01:00
Francisco
b985a74894
Merge pull request #17367 from fjmolinas/pr_driver_ztimer_corner_cases
...
drivers: migrate xtimer64 and xtimer/ticks users to ztimer
2022-01-24 10:41:24 +01:00
Leandro Lanzieri
4eb58d74b5
drivers/ft5x06: allow multiple device types
2022-01-21 13:13:09 +01:00
Benjamin Valentin
a8983d288f
drivers/dose: add documentation for dose_watchdog
2022-01-20 18:37:23 +01:00
Benjamin Valentin
a8ad618a71
drivers/dose: make use of ringbuffer for RX
2022-01-19 11:43:35 +01:00
Francisco
bc6624e67b
Merge pull request #17180 from benpicco/drivers/dose-watchdog
...
drivers/dose: introduce watchdog timer
2022-01-18 23:43:29 +01:00
5e599a82dd
Merge pull request #17531 from fjmolinas/pr_spi_gpio_init_reference
...
drivers/periph_spi: spi_init_with_gpio_mode mode by reference
2022-01-18 18:44:54 +01:00
Francisco Molina
a1fe17c698
drivers/ltc4150: migrate to ztimer64
2022-01-18 16:27:44 +01:00
Francisco Molina
579ca6d941
drivers/periph_spi: spi_init_with_gpio_mode mode by reference
2022-01-18 16:22:18 +01:00
Benjamin Valentin
3e1076e3b9
drivers/dose: set backoff timer before send
2022-01-18 15:41:38 +01:00
Benjamin Valentin
ddf80a8bdb
drivers/dose: introduce watchdog timer
2022-01-18 15:41:38 +01:00
75f5048b68
Merge pull request #17497 from jia200x/pr/lora/fix_rssi_val
...
[treewide] lora: use int16_t for RSSI value
2022-01-17 18:57:37 +01:00
Jose Alamos
9955a35c63
[treewide] lora: use int16_t for RSSI value
...
The RSSI values reported by LoRa transceiver can be less than -127.
Therefore, `int8_t` is not enough. This commit defines the RSSI of
`netdev_lora_rx_info` as `int16_t` and adapt the drivers accordingly
(sx126x, sx127x).
2022-01-17 17:54:18 +01:00
37bc47e21c
drivers/at: remove deprecated AT_SEND_ECHO define
2022-01-14 09:06:17 +01:00
11f73ea5c9
drivers/ft5x06: add touch panel driver
2022-01-08 15:08:05 +01:00
e0324d5278
drivers/lis2dh12: fix missing stdbool include
2022-01-06 12:07:41 +01:00
0056648581
Merge pull request #17418 from aabadie/pr/drivers/periph_build_enh
...
drivers/periph_common: build periph module selectively
2022-01-04 14:59:39 +01:00
acd73529a5
drivers/netdev: fix missing and non matching arguments in doc
2022-01-03 09:52:04 +01:00
7ce1894da9
drivers/candev: fix non matching argument in doc
2022-01-03 09:51:40 +01:00
79df157727
sys: move rtc utility functions to their own module
2021-12-20 13:04:20 +01:00
c9e30b01c0
Merge pull request #16333 from fjmolinas/pr_driver_hm3301
...
drivers/hm330x: initial commit
2021-12-16 17:56:45 +01:00
Francisco Molina
fe38284a3c
drivers/hms330x: initial import
2021-12-16 15:19:44 +01:00
Martine Lenders
e062ad78f3
Merge pull request #17265 from miri64/ethos/fix/threadify-state-machine
...
ethos: move bulk of state machine out of ISR context
2021-12-16 12:24:14 +01:00
Martine Lenders
820a3976ad
ethos: move bulk of state machine out of ISR context
...
This moves the following parts of ethos' state machine out of ISR
context:
- Sending and replying to HELLO messages
- Byte-unstuffing
Some escape handling is still needed in the ISR handler, due to ethos'
protocol design, to determine if a received byte must go into the
netdev queue (tsrb) or the STDIO queue (isrpipe), but the actual
unstuffing is now done in the STDIO and netdev handler threads,
respectively.
2021-12-15 16:15:30 +01:00
Martine Lenders
568be105f2
stdio_ethos: move to ethos_stdio
2021-12-15 16:15:29 +01:00
benpicco
e8cbf1ea90
Merge pull request #16681 from benpicco/drivers/dose-collision
...
drivers/dose: make use of UART collision detection feature
2021-12-08 20:48:28 +01:00
Gunar Schorcht
499cbb9062
drivers/mcp47xx: add driver for MCP47xx DAC devices
2021-12-08 05:42:07 +01:00
2e0c02b25d
Merge pull request #17340 from gschorcht/driver/fix_css811_read_status
...
driver/css811: fix read status
2021-12-04 17:41:02 +01:00
benpicco
0646862421
Merge pull request #10430 from gschorcht/drivers_pcf857x
...
drivers: add PCF857X I2C I/O expander driver
2021-12-04 16:57:01 +01:00
Gunar Schorcht
7eb599e765
drivers: add PCF857X I/O expander driver
2021-12-04 14:11:04 +01:00
Gunar Schorcht
6bdc590516
drivers/ccs811: small cleanups in documentation
2021-12-04 13:43:31 +01:00
Gunar Schorcht
27265095cd
drivers/ccs811: fix the data ready check
...
When the measurement results are read from the `ALG_RESULT_DATA` register set including the STATUS register, the `DATA_RDY` flag in the STATUS register is already cleared during reading. Therefore it is not possible to check this flag after the `ALG_RESULT_DATA` has been read. Therefore the function `ccs811_read_iaq` always returned `CCS811_ERROR_NO_NEW_DATA` although the data were valid either after checking for new data with the function `ccs811_data_ready` or after triggering the Data Ready interrupt.
2021-12-04 13:43:31 +01:00
8329112c45
Merge pull request #17088 from fjmolinas/pr_stmpe811_spi
...
drivers/stmpe811: add spi mode
2021-12-03 21:37:46 +01:00
Francisco Molina
e17fe0aee2
drivers/stmpe811: add spi mode
2021-12-03 17:12:03 +01:00
b6cc07009f
Merge pull request #17284 from fjmolinas/pr_ztimer_no_periph_rtt
...
sys/ztimer: add 'ztimer_no_periph_rtt'
2021-12-02 11:02:24 +01:00
Francisco Molina
7c3360e4d6
sys/ztimer: add 'ztimer_no_periph_rtt'
...
This is a temporary fix for Issue #17060 . It allows to disable
auto inclusion of `ztimer_periph_rtt` in cases where another
module or application requires direct access.
Limitations:
- as ifeq are involved order of inclusion matters, therefore
these modules should be included early in the build at application
level and not in modules `Makefile.dep`
- this does not disallow direct inclusions of `ztimer_periph_rtt`,
since this only disables auto inclusion of these modules
This is a temporary solution since this is already possible with
Kconfig, but not in make.
2021-12-02 07:54:38 +01:00
Francisco Molina
1ef9ca8a6f
drivers/soft_spi: remove nanosleep
2021-11-30 10:31:22 +01:00
Gunar Schorcht
3d93b2bcf0
drivers/periph/i2c: i2c_acquire() returns void
...
Since all implementations simply return 0 and most drivers do not check the return value, it is better to return void and use an assert to ensure that the given device identifier and given device parameters are correct.
2021-11-29 06:35:25 +01:00
Wouter Symons
5055d0993e
drivers/dht: correct interpreting raw values
2021-11-20 14:55:02 +01:00
Benjamin Valentin
1768e93710
drivers/periph: use uint_fast8_t as default type
...
The default driver type is just an index into a device array defined
by the board.
If a platform wants to encode additional information in the device type,
it can define a custom type.
This means we can just set the default type to whatever fits the target
CPU best.
On ARM this will still be a 32 bit word, but on AVR it will by a 8 bit byte.
2021-11-18 10:29:50 +01:00
f8e7e2f557
usbdev_mock: Adapt to xmit API
...
Includes the adaptations needed in the test application
2021-11-16 20:16:59 +01:00
597f1d19aa
usbdev: Refactor to xmit API
...
This API change refactors the usbdev API to supply buffers via the
usbdev_ep_xmit function. This changes from the usbdev_ep_ready call to allow
separate buffers per call. An usbdev_ep_buf_t pseudotype is available and must
be used when defining buffers used for endpoints to adhere to the DMA alignment
restrictions often required with usb peripherals.
Main advantage is that the usbdev peripherals no longer have to allocate
oversized buffers for the endpoint data, potentially saving multiple KiB
of unused buffer space. These allocations are now the responsibility of
the individual USB interfaces in the firmware
2021-11-16 11:21:07 +01:00
59e85cf921
usbdev: Refactor to xmit API
...
This API change refactors the usbdev API to supply buffers via the
usbdev_ep_xmit function. This changes from the usbdev_ep_ready call to allow
separate buffers per call. An usbdev_ep_buf_t pseudotype is available and must
be used when defining buffers used for endpoints to adhere to the DMA alignment
restrictions often required with usb peripherals.
Main advantage is that the usbdev peripherals no longer have to allocate
oversized buffers for the endpoint data, potentially saving multiple KiB
of unused buffer space. These allocations are now the responsibility of
the individual USB interfaces in the firmware
2021-11-16 11:21:00 +01:00
Benjamin Valentin
b34b67feee
drivers/dose: reduce struct padding
...
By moving all the single byte struct elements to the end, we can reduce
padding inside `dose_t` and ensure that `recv_buf` is always aligned.
This saves some RAM:
master
------
text data bss dec hex filename
36384 136 12944 49464 c138 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.e
this patch
----------
text data bss dec hex filename
36484 136 12936 49556 c194 tests/driver_dose/bin/samr21-xpro/tests_driver_dose.elf
2021-11-12 16:19:20 +01:00
Francisco
b609646961
Merge pull request #17138 from fjmolinas/pr_sx126x_fixes
...
drivers/sx126x: fix sync word and TX PA configuration
2021-11-11 10:59:08 +01:00
Benjamin Valentin
f89d0c7c25
drivers/periph/uart: add periph_uart_collision feature
2021-11-10 15:57:45 +01:00
benpicco
026d6cfba1
Merge pull request #16768 from benpicco/drivers/dose-timeout_bytes
...
drivers/dose: calculate timeout based on symbol rate
2021-11-10 12:40:13 +01:00
Francisco
035ee0a595
Merge pull request #17172 from kaspar030/drivers_ds18_missing_stdint.h
...
drivers/ds18.h: add missing stdint.h include
2021-11-10 08:42:03 +01:00
5d3a4d63d8
drivers/ds18.h: add missing stdint.h include
2021-11-09 21:48:48 +01:00
benpicco
12ade5a8b5
Merge pull request #16752 from benpicco/drivers/dose-standby
...
drivers/dose: enable standby pin
2021-11-09 18:20:17 +01:00
Benjamin Valentin
6c1481b6ee
drivers/dose: enable standby pin
...
Some CAN transceivers have a standby pin that has to be pulled low
in order to use it.
If the interface is disabled we can set it to high again to save some
power.
2021-11-09 15:19:35 +01:00
Francisco Molina
e17e3254e1
drivers/sx126x: add tx_pa_mode
...
BOARDs with RF switch might only support one of the TX modes, and
on init the BOARD needs to be configured accordingly and the correct
mode selected on TX.
2021-11-08 18:42:05 +01:00
Marian Buschsieweke
5e75047a2b
drivers/lis3dh: fix unaligned memory access
...
The bogus packed attribute added to lis3dh_data_t resulted in the
structure being aligned two 1 byte. It was later casted to an
uint16_t pointer (which is aligned two 2 bytes). By dropping the
packed attribute the alignment mismatch is fixed.
2021-11-06 20:05:05 +01:00
26346188b9
Merge pull request #17105 from aabadie/pr/drivers/ata8520e_ztimer
...
drivers/ata8520e: migrate to ztimer
2021-11-05 16:22:59 +01:00
baa1ed38cc
drivers/ata8520e: migrate to ztimer
2021-11-05 12:49:37 +01:00
benpicco
bfb8d1d3fd
Merge pull request #17014 from benpicco/periph/gpio-cb_not_NULL
...
drivers/periph/gpio: state that interrupt callback must not be NULL
2021-11-05 12:47:16 +01:00
295092bc29
drivers/rn2xx3: migrate to ztimer
2021-11-04 10:39:36 +01:00
Francisco Molina
472f6495a8
drivers/xbee: migrate to ztimer_msec
2021-11-02 21:46:19 +01:00
Francisco Molina
9a2c880a60
drivers/stmpe811: use errno
2021-10-30 23:25:50 +02:00
Ollrogge
c6e94aa6be
periph/flashpage.h: add comment about riotboot impact on flashpage layout
2021-10-26 14:35:33 +02:00
Francisco
7f3344870d
Merge pull request #16972 from Ollrogge/flashpage_pr
...
periph/flashpage: extend API
2021-10-26 12:51:05 +02:00
9f8aee4e95
usbdev: Deprecate USBDEV_EVENT_TR_FAIL
2021-10-24 19:33:29 +02:00
Ollrogge
72d47013dd
periph/flashpage: extend API
2021-10-19 22:33:09 +02:00
Benjamin Valentin
f624eb473a
drivers/periph/gpio: state that interrupt callback must not be NULL
...
This allows us to use `assert(cb != NULL)` inside `gpio_init_int()`
and save a few cycles of interrupt latency.
2021-10-19 21:26:50 +02:00
Gunar Schorcht
62dd51d8ba
drivers: add anchor to doc to allow stable references
2021-10-13 17:37:16 +02:00
Jose Alamos
503f5a9ddb
netdev: add netdev_register_signal
2021-10-05 14:35:07 +02:00
benpicco
7bfcda979b
Merge pull request #16906 from benpicco/rtt_rtc.h-doxfix
...
rtt_rtc: clarify documentation about epoch
2021-09-28 16:11:34 +02:00
Benjamin Valentin
928c593bca
rtt_rtc: clarify documentation about epoch
...
`epoch` in this context refers to `RIOT_EPOCH`, not Unix Epoch.
Clarify the documentation to avoid confusion.
2021-09-28 15:12:14 +02:00
Vera Clemens
06359e05ad
drivers/lpsxxx: add support for lps22hh
2021-09-22 17:54:02 +02:00
Francisco
2d0a6874c7
Merge pull request #16763 from benpicco/drivers/lm75-saul
...
drivers/lm75: add SAUL integration
2021-09-21 10:41:58 +02:00
benpicco
b6a2d08afc
Merge pull request #15915 from fabian18/ina3221-fixes
...
drivers/ina3221: style fixes and improvements
2021-09-16 22:22:33 +02:00
benpicco
c98c488559
Merge pull request #16746 from jia200x/pr/hal/fb_lock
...
ieee802154/submac: reimplement using FSM
2021-09-03 18:13:58 +02:00
Jose Alamos
8f97f73453
ieee802154/submac: reimplement using FSM
2021-09-03 15:00:47 +02:00
Benjamin Valentin
0ee0c5e40e
drivers/periph: define periph_rtc_mem
2021-09-03 11:43:42 +02:00
Francisco
a1cbcc9ede
Merge pull request #15902 from maribu/spi-api-change-1
...
drivers/periph_spi: let spi_acquire return void
2021-09-02 08:50:56 +02:00
benpicco
9294a31856
Merge pull request #16781 from benpicco/flashpage_page-const
...
drivers/flashpage: flashpage_page() takes a const argument
2021-08-31 10:22:46 +02:00
Jean Pierre Dudey
719a18ca8b
Merge pull request #16773 from jeandudey/ili9341-flip
...
drivers/ili9341: add rotation mode to ili9341_params_t
2021-08-27 14:21:56 +02:00
Benjamin Valentin
f903ec90d4
drivers/flashpage: flashpage_page() takes a const argument
...
All addresses to flashpage_page() must be in flash. Flash memory is
`const`, therefore this function must also take `const` pointers.
2021-08-27 14:08:25 +02:00
Jean-Pierre De Jesus DIAZ
e6cce1a15f
drivers/ili9341: add rotation mode to ili9341_params_t
...
Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
2021-08-26 10:45:05 +02:00
Benjamin Valentin
3399a6476a
drivers/dose: calculate timeout based on symbol rate
...
A fixed timeout is either too long for high symbol rates or too short
for low symbol rates.
To fix this, calculate the timeout based on the symbol rate.
For this, the old 5ms timeout is equivalent to 58 bytes being transmitted
at 115200 baud (8 data bit + start & stop bit).
I rounded this to 50 bytes which should yield 4340 µs.
2021-08-25 20:48:54 +02:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
Benjamin Valentin
fc457459bf
drivers/lm75: cleanup
2021-08-24 14:34:52 +02:00
Benjamin Valentin
75e2a65681
drivers/flashpage: add missing include
2021-08-24 14:30:23 +02:00
benpicco
be85777cd1
Merge pull request #16678 from viktorbatista/modules/lm75
...
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 18:04:12 +02:00
Vitor Batista
9267fa2670
drivers/lm75: driver for the lm75 sensor and derivatives
2021-08-20 17:09:40 +02:00
benpicco
71953c984c
Merge pull request #16534 from jia200x/pr/detach_radio_hal_descriptor
...
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 18:15:51 +02:00
Jose Alamos
ddc9c7c686
ieee802154/radio_hal: detach hal descriptor from driver
2021-08-18 15:24:10 +02:00
Jose Alamos
8c0c603146
drivers/at86rf215: remove msg queue dependency
2021-08-16 15:28:06 +02:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Marian Buschsieweke
7aab478678
drivers/soft_spi: update API to match periph_spi
2021-08-06 12:47:00 +02:00
Marian Buschsieweke
9e5f7b6797
drivers/periph_spi: make spi_acquire() return void
...
There is no way to properly handle incorrect SPI parameters at run time, so
just having an assertion blow up is the better choice here.
As most instances of `spi_acquire()` don't check the return value anyway, this
will improve debugging experience quite a bit. Some implementation of
spi_acquire() don't even check parameters anyway.
2021-08-06 12:46:57 +02:00
benpicco
feac187d54
Merge pull request #16506 from benpicco/drivers/dose-rx_start
...
drivers/dose: make use of start condition received interrupt
2021-07-28 17:21:29 +02:00
Benjamin Valentin
d48f673597
drivers/dose: make use of periph_uart_rx_start feature
2021-07-28 16:19:04 +02:00
Benjamin Valentin
0964a217b5
rtt_rtc: add rtc_settimeofday() & rtc_gettimeofday()
2021-07-27 22:12:25 +02:00
Benjamin Valentin
9194440ead
drivers/periph/uart: add periph_uart_rx_start feature
2021-07-27 16:29:30 +02:00
benpicco
07b3e19d01
Merge pull request #16632 from maribu/periph/uart
...
periph/uart: Fix doc, use errno for return values
2021-07-21 00:12:24 +02:00
Jose Alamos
b299299ad3
drivers/sx126x: fix NETOPT_RX_SYMBOL_TIMEOUT
2021-07-14 14:11:15 +02:00
Jose Alamos
c6da77a454
Revert "drivers/sx127x: fix size of rx symbol timeout"
...
This reverts commit 26ead7b5be
2021-07-13 21:14:28 +02:00
Marian Buschsieweke
e7cacf6f60
periph/uart: Fix doc, use errno for return values
...
Some terminology issues are fixed. (The speed of an UART interface is
the symbol rate. The unit it is measured in is baud, which is symbols
per second. There is no such thing as baudrate or even baud/s.)
The return codes are changed to use negative errno constants on error
to match the driver design rules. For backward compatibility, the
enum was updated to match the error codes. Unless an application
depends on the exact numerical value (which would be insane), this is
not breaking any code.
2021-07-09 17:06:01 +02:00
Akshai M
17ad0fc5a7
driver/sx126x : Add set_rf_mode interface
2021-07-09 11:16:41 +02:00
Akshai M
8870a885cb
drivers/sx126x : Add stm32wl variant
2021-07-09 11:16:41 +02:00
Akshai M
8d43dbf67f
drivers/sx126x : Update NETOPT_RX_xx
...
r/NETOPT_RX_TIMEOUT/NETOPT_RX_SYMBOL_TIMEOUT
Use sx126x_symbol_to_msec() to calculate the RX timeout in ms.
2021-07-08 12:19:36 +02:00
Akshai M
a3ed19e0ee
drivers/sx126x.h : Add sx126x_symbol_to_msec()
2021-07-08 12:19:36 +02:00
Fabian Hüßler
c50149e488
drivers/ina3221: refactor
2021-07-07 08:40:02 +02:00
Francisco
ccfd3ee980
Merge pull request #16597 from jia200x/pr/sx126x_kconfig
...
sx126x: add support for multiple simultaneous variants
2021-07-06 13:19:15 +02:00
benpicco
8f9233f329
Merge pull request #16232 from maribu/drivers/cc110x
...
drivers/cc110x: add power off (sleep) functions
2021-07-06 12:24:26 +02:00
Francisco
daeac91aea
Merge pull request #16604 from jia200x/pr/lora/fix_rx_timeout_size
...
netdev/lora: fix size of NETOPT_RX_SYMBOL_TIMEOUT
2021-07-06 12:15:00 +02:00
Marian Buschsieweke
3d76875f38
drivers/cc110x: style fixes
2021-07-06 10:12:21 +02:00
Francisco Acosta
0efc13602f
drivers/cc110x: add power off (sleep) functions
2021-07-06 10:11:55 +02:00
Jose Alamos
2e5b7f9e31
sx126x: add support for multiple simultaneous variants
2021-07-05 16:02:15 +02:00
Jose Alamos
26ead7b5be
drivers/sx127x: fix size of rx symbol timeout
2021-07-01 11:58:34 +02:00
Kevin "Tristate Tom" Weiss
25c871ed9a
Merge pull request #16576 from jia200x/pr/netdev/migrate_dst_filter
...
ieee802154: migrate `netdev_ieee802154_dst_filter` to a common ieee802154
2021-06-29 10:50:08 +02:00
Jose Alamos
dfeb57b7f8
netdev_ieee802154: deprecate netdev_ieee802154_dst_filter
2021-06-23 16:44:07 +02:00
Benjamin Valentin
c1eead925d
drivers/slipdev: register with netdev
2021-06-21 12:42:03 +02:00
Benjamin Valentin
9a548b834f
drivers/ethos: register with nedev
2021-06-11 12:31:37 +02:00
Benjamin Valentin
2467c84634
drivers/ethos: enable multiple instances
2021-06-11 12:31:37 +02:00
benpicco
41bbafdfe4
Merge pull request #16328 from benpicco/driver/lis2dh12-cleanup
...
drivers/lis2dh12: clean up API
2021-06-03 15:33:04 +02:00
Benjamin Valentin
392bacd9c7
drivers/lis2dh12: add support for temperature sensor
2021-06-03 12:59:50 +02:00
Benjamin Valentin
28148b7dc3
drivers/lis2dh12: general cleanup
...
Don't expose raw register values for the user to figure out
2021-06-03 12:59:50 +02:00
Benjamin Valentin
e8264d3ea9
drivers/lis2dh12: fix event handling
...
Don't push event handling to the user.
2021-06-03 12:59:50 +02:00
39094d0833
drivers/sx127x: uncrustify code
2021-05-18 11:00:44 +02:00
Jnae
b287d120ff
at86rf215: timestamp counter for rx frames
2021-05-12 15:27:36 +02:00
benpicco
619a444741
Merge pull request #16347 from benpicco/drivers/rtt_rtc-rtc_get_time_ms
...
drivers/rtt_rtc: implement rtc_get_time_ms()
2021-05-05 19:13:21 +02:00
benpicco
2b6454a2d7
Merge pull request #16106 from fabian18/ieee802154_security_small_bugfix_and_stricter_names
...
net/ieee802154_security: small bugfix and stricter names
2021-05-03 11:29:43 +02:00
Benjamin Valentin
dcebc7d480
drivers/rtt_rtc: implement rtc_get_time_ms()
...
RTC on RTT usually runs at a frequency greater than 1 Hz, so sub-second
precision is available.
Add a function to get the current RTC timestamp together with it's sub-second
component.
2021-05-03 00:09:18 +02:00
benpicco
0493292ef3
Merge pull request #15908 from benpicco/drivers/periph_common-flashpage
...
drivers/periph: flashpage: add common helper functions
2021-04-27 18:54:10 +02:00
Benjamin Valentin
d611a264fd
drivers/cc2420: register with netdev
2021-04-27 17:37:52 +02:00
Benjamin Valentin
917cf85225
drivers/periph: flashpage: add common helper functions
2021-04-27 16:52:36 +02:00
Fabian Hüßler
7036c2b9ee
sys/net/link_layer/ieee802154: fix small typos
2021-04-27 08:54:19 +02:00
Benjamin Valentin
45fbcee7dc
drivers/soft_uart: fix typo in eMail address
...
Somehow an extra letter has sneaked into the mail and was copy & pasted
around.
2021-04-26 17:15:17 +02:00
