If not included before, IS_USED macro from modules.h is undefined,
leading to such errors:
error: missing binary operator before token "("
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
This adds two functions:
void gpio_ll_switch_dir_output(gpio_port_t port, uword_t outputs);
void gpio_ll_switch_dir_input(gpio_port_t port, uword_t inputs);
The first configures GPIO pins specified by a bitmask as output, the
second configures the specified pins as input.
The main use case is to allow bit-banging bidirectional protocols using
more basic GPIO peripherals that do not implement open drain mode, such
as found e.g. on MSP430, ATmega, or SAM0.
It is not intended to implement this feature on modern MCUs with
sophisticated GPIO peripherals.
Note that for the very CPU this driver is used with (nRF52 on the
microbit-v2 board), this currently needs extra workarounds to copy
written data from flash to RAM so that the driver can see it. (Otherwise
it silently writes 00, and then correctly reads 00 from the bus all the
time).
This adds the features
- periph_gpio_ll_input_pull_down:
To indicate support for input mode with internal pull down
- periph_gpio_ll_input_pull_keep:
To indicate support for input mode with internal resistor
pulling towards current level
- periph_gpio_ll_input_pull_up:
To indicate support for input mode with internal pull up
- periph_gpio_ll_disconnect:
To indicate a GPIO can be disconnected
- periph_gpio_ll_open_drain:
To indicate support for open drain mode
- periph_gpio_ll_open_drain_pull_up:
To indicate support for open drain mode with internal pull up
- periph_gpio_ll_open_source:
To indicate support for open source mode
- periph_gpio_ll_open_source_pull_down:
To indicate support for open source mode with internal pull down
The documentation on the state `GPIO_DISCONNECT` was a bit vague. The
API doc said it should disconnect the GPIO from all peripherals, the
test also tested them for being electrically disconnected.
The documentation in both the test and the API is extended to point out
that a GPIO indeed SHOULD be in high impedance state, but that user
MUST NOT expect that this requested is honored by every implementation
and for every GPIO pin.
In the test it is also pointed out that failing the test for a GPIO
in the `GPIO_DISCONNECT` state being electrically disconnected is for
some pins expected, and that the test should be just run again with
different GPIOs. The test intentionally tests for a feature not provided
by every GPIO pin rather than warning on a failure: The effort to just
flash and run the test again with different GPIOs is relatively low, but
it does confirm correct behavior of the API.
This commit optimizes the `gpio_conf_t` type in the following
regards:
- The "base" `gpio_conf_t` is stripped from members that only some
platforms support, e.g. drive strength, slew rate, and disabling of
the Schmitt Trigger are no longer universally available but
platform-specific extensions
- The `gpio_conf_t` is now crammed into a bit-field that is 8 bit or
16 bit wide. This allows for storing lots of them e.g. in
`driver_foo_params_t` or `uart_conf_t` etc.
- A `union` of the `struct` with bit-field members and a `bits` is used
to allow accessing all bits in a simple C statement and to ensure
alignment for efficient handling of the type
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Parameter `num` of `mtd_write_page_raw` is the number of bytes to be written, which is the number of sectors to be written`count` multiplied by the pages per sector `mtd->pages_per_sector` and the page size `mtd->page_size`.
Assertions are used instead of returning a NULL pointer to detect errors in the MTD definition and access in the case that the return value is not evaluated.
Allow accessing supported timer frequencies with a dedicated API.
This API needs to be implemented per platform and is available with
the feature periph_timer_query_freqs.
This makes it easier to use common error reporting such as `strerror()`
or `tiny_strerror()` to give more insight on why something failed.
The custom error codes via `enum` have been updated to be synonymous
with the `errno` codes for backward compatibility.
In addition, `pcf857x_init()` has been updated to no longer or
together the return code, but rather abort on the first fail transaction
and return the error code as is. Otherwise (when both fail due to
different error codes) the returned error code may be garbage.
19465: drivers/mtd: use XFA for pointers to defined MTDs r=benpicco a=gschorcht
### Contribution description
This PR provides the support to hold pointers to defined MTDs within a XFA. The XFA allows
- to access MTDs of different types (`mtd_flashpage`, `mtd_sdcard`, `mtd_emulated`, ...) by an index
- to determine the number of MTDs defined in the system.
### Testing procedure
To be defined once PR #19443 is merged because emulated MTDs will allow to test this PR on arbitrary boards.
### Porting Guide
For external boards:
- remove the `MTD_NUMOF` definition from `board.h`
- add `MTD_XFA_ADD(<mtd_dev>, <idx>);` to the definition of `<mtd_dev>`.
- `MTD_0`, `MTD_1`, … defines are no longer needed.
### Issues/PRs references
Related to PR #19443
19981: Fletcher32: Add incremental API r=benpicco a=bergzand
### Contribution description
This PR extends the current fletcher32 checksum with an incremental API mode. This way the bytes to be checksummed can be supplied via multiple successive calls and do not have to be provided in a single consecutive buffer.
I've also rephrased the warning with the original function a bit as that function uses an `unaligned_get_u16` to access the data. The data thus does not require alignment, but the length does need to be supplied as number of 16 bit words.
### Testing procedure
The test has been extended
### Issues/PRs references
None
19995: sys/psa_crypto: Fix macro for public key max size and SE example r=benpicco a=Einhornhool
### Contribution description
#### 1. Wrong public key size when using secure elements, introduced by #19954
Fixed conditions for key size macros in `crypto_sizes.h`.
#### 2. EdDSA and ECDSA examples fail when using a secure element because of unsopported changes introduced by #19954
Updated `example/psa_crypto` to use only supported functions for secure elements.
### Testing procedure
Build `example/psa_crypto` for secure elements and run application
Output on master:
```
2023-10-19 14:33:24,372 # main(): This is RIOT! (Version: 2019.07-devel-22378-gb6772)
2023-10-19 14:33:24,372 # HMAC SHA256 took 56393 us
2023-10-19 14:33:24,372 # Cipher AES 128 took 68826 us
2023-10-19 14:33:24,372 # *** RIOT kernel panic:
2023-10-19 14:33:24,373 # HARD FAULT HANDLER
2023-10-19 14:33:24,373 #
2023-10-19 14:33:24,373 # *** rebooting...
```
Output with fixes:
```
2023-10-19 13:35:24,715 # main(): This is RIOT! (Version: 2019.07-devel-22384-g8ef66-dev/psa-crypto-fixes)
2023-10-19 13:35:24,715 # HMAC SHA256 took 56374 us
2023-10-19 13:35:24,715 # Cipher AES 128 took 68805 us
2023-10-19 13:35:24,715 # ECDSA took 281164 us
2023-10-19 13:35:24,715 # All Done
```
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Lena Boeckmann <lena.boeckmann@haw-hamburg.de>
19941: drivers/lcd: add MCU-driven low-level parallel interface r=benpicco a=gschorcht
### Contribution description
The PR extends the LCD driver by a low-level interface for MCU-driven implementations of the MCU 8080 16-/8-bit parallel interface, allowing the MCU to use special peripherals for the interface, such as the FMC for STM32 MCUs, which is significantly faster than the integrated GPIO-driven parallel interface implementation of the LCD driver.
### Testing procedure
~Once PR #19938 and PR #19939 are merged, a PRs for these board can be pushed that allow to test this PR.~
Use either PR #19943 or PR #19944 on top of this PR to test, e.g. with PR #19943:
```
BOARD=stm32f723e-disco make -j8 -C tests/drivers/st77xx flash
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
