cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
This allows a board configuration to select which kind of averaging
should be applied to the pin instead of always using 32 sample average.
Very high impedance sources may need to disable hardware averaging in
order to give correct values, the on-chip temperature sensor is one such
signal source.
These pins have no alternate function in the pin mux so we might as well
make them available to applications. These pins are the only pins which
provide differential analog input pairs on this board.
A dispatcher function is implemented for directing writes to the correct
function. The dispatcher is bypassed completely if the CPU only contain
one kind of UART module.
There are at least two different UART hardware modules deployed in
different Kinetis CPU families (or possibly three or more when counting
variations of the UART module). The UART module is an older 8 bit module
with advanced functionality, while the LPUART is a 32 bit module with
focus on low power consumption.
- The older families in the K series all have UART modules.
- The K22F family have both UART and LPUART modules in the same CPU.
- Older L series (e.g. KL25Z) have two variations of the UART module
- Newer L series (e.g. KL43Z) have LPUART modules, and sometimes
UART as well.
- Newer W series (KW41Z) have only LPUART
Unify cpu_init for all Kinetis CPUs to reduce code duplication.
Updated the MCG driver implementation to make the configuration easier.
Most clock settings are initialized by kinetis_mcg_init() called from
cpu_init. Board specific external clock source initialization
(FRDM-K64F, PhyNode) needs to be performed in board_init instead of
in cpu_init.
- use assert() for checking the line parameter
- use 'bit.h' for bitbanding
- simplified code a bit
- unified style of defifining the board configuration
- removed unused configurations form pba-d-01-kw2x and frdm-k64f
