- Rename all `arduino_pinmap.h` to `arduino_iomap.h`
- An empty `arduino_pinmap.h` that just includes `arduino_iomap.h`
is provided for backward compatibility
- Move all info from `arduino_board.h` into the new file as trivial
macros, so that they can also be used outside of sketches
- The new name reflects the fact not just pin mappings, but also
other I/O features such as PWMs are mapped
- Drop all `arduino_board.h`
- `arduino_board.h` and `arduino_iomap.h` now provide the exact
same information, just in a different format
- a generic `arduino_board.h` is provided instead that just
uses the info in `arduinio_iomap.h` and provides them in the
format the code in `sys/arduino` expects it
- Add fine grained features to indicate for mappings
- availability of mappings for analog pins, DAC pins, PWM pins,
UART devices, SPI/I2C buses to the corresponding RIOT
identification can now be expressed:
- `arduino_pins`: `ARDUINO_PIN_0` etc. are available
- `arduino_analog`: `ARDUINO_A0` etc. are available
- `arduino_pwm`: `ARDUINO_PIN_13_PWM_DEV` etc. are available
- `arduino_dac`: `ARDUINO_DAC0` etc. are available
- `arduino_uart`: `ARDUINO_UART_D0D1` or similar are available
- `arduino_spi`: `ARDUINO_SPI_ISP` or similar are available
- `arduino_i2c`: `ARDUINO_I2C_UNO` or similar are available
- mechanical/electrical compatibility with specific form factors
can now be expressed as features:
- `aruino_shield_nano`: Arduino NANO compatible headers
- `aruino_shield_uno`: Arduino UNO compatible headers
- `aruino_shield_mega`: Arduino MEGA compatible headers
- `aruino_shield_isp`: ISP header is available
This provides the groundwork to implement shield support as modules
that can rely on the I/O mappings, rather than having to provide a
configuration per board.
A custom rainbow boot-up animation/delay gets old pretty quick
and we didn't actually init the LEDs anyway, so it would not be shown.
Drop the custom led_init() so the generic led_init() kicks in
and properly initializes the LEDs.
Introduce and use a common/remote/Makefile.features.
The boards were already using the common `Makefile.include` and
`Makefile.dep`.
This makes 'include $(RIOTCPU)/cc2538/Makefile.features' be done in
the same module where 'CPU' is defined.
Preparation for moving 'CPU' definition to Makefile.features.
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
Adapt the periph ADC implementation to use vendor defines where
ever possible. Remove duplicate or obsolete defines and adapt
board configuration as required.
Rework SPI periph driver to use proper RIOT GPIO API functions.
Also cleanup header files by using vendor defines and remove
obsolete code. Further, adapt board config accordingly.
The SPI bus frequency/clock is calculated relative to the MCUs
core clock. Currently all boards use the default 32MHz, hence
prescaler settings for SPI are all the same. This PR moves the
default config for 32MHz to the CPU and allows to be overriden
by board config if needed.
