Leandro Lanzieri
b5171f4d48
tests/driver_at: Add receive until string test
2019-05-16 14:45:53 +02:00
Leandro Lanzieri
5b04fb1713
drivers/at: Add function to receive until string
2019-05-16 14:45:53 +02:00
MichelRottleuthner
c754f3c4c7
Merge pull request #11451 from fhessel/pcd8544
...
drivers/pcd8544: Use uint8_t instead of char for byte represenatation
2019-04-30 21:47:50 +02:00
Frank Hessel
70ac451a2b
drivers/sdcard_spi: Use uint8_t for byte values
2019-04-29 19:25:34 +02:00
Frank Hessel
827868a7a0
drivers/pcd8544: replace char by uint8_t for bytes
2019-04-25 23:42:30 +02:00
Philipp Blum
9f2ef5e367
drivers/periph_common/gpio_util: introduce gpio_util_shiftin()
2019-04-18 07:09:32 +02:00
c1547efb3a
Merge pull request #11316 from fjmolinas/pr_sx127x_switch
...
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 18:40:37 +02:00
francisco
c62d9feff7
drivers/sx127x: add support for rx and tx switch pin
2019-04-10 08:18:01 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Dylan Laduranty
a81dbf0037
Merge pull request #11152 from ibr-cm/petersen/l3g4200d-fix-pr
...
l3g4200d: Fixes conversion bug
2019-04-05 15:49:13 +02:00
Vincent Dupont
74ddf56171
tests/conn_can: build stm32 CAN drivers
...
Build can_stm32 module on boards which have a stm32 CAN controller.
2019-04-03 11:12:46 +02:00
Torben Petersen
506e208ffd
drivers/l3g4200d: fixes driver conversion
2019-03-30 10:32:43 +01:00
Vincent Dupont
ae95137f95
can stm32: add a driver for STM32 bxCAN peripheral
...
This driver is compliant with the candev interface. It has been tested
with STM32F0 and STM32F2 and STM32F413 ONLY at this time but should be
compliant with other STM32Fx devices
2019-03-29 12:03:43 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
Dylan Laduranty
ccf12c57a8
Merge pull request #10884 from fedepell/sam_rwee_support
...
sam0 flashpage RWWEE flash support
2019-03-28 11:00:25 +01:00
Martine Lenders
664763bb29
netdev: add doc group for network device types
2019-03-26 21:37:20 +01:00
Kevin "Bear Puncher" Weiss
268d3e926c
Merge pull request #10826 from ranbe1/at_driver_uart_initialize_status
...
drivers/at: make at_dev_init() return uart initialize status
2019-03-26 14:07:05 +01:00
c697a3bfd8
usbdev: extend events with suspend/resume
2019-03-25 21:03:21 +01:00
Federico Pellegrin
5faafac092
sam0 flashpage RWWEE flash support
2019-03-21 04:27:41 +01:00
7c285eb186
drivers/lpsxxx: add support for lps22hb
2019-03-20 14:43:37 +01:00
1f4dee90a1
drivers/lpsxxx: unify lps331ap and lps25h drivers
2019-03-20 14:43:36 +01:00
4d352fc93f
usbdev: Extend with low level initialization functions
2019-03-20 09:12:24 +01:00
Martine Lenders
51626a48d4
netdev: document valid values for iolist in send()
2019-03-15 11:34:19 +01:00
71204d1d70
Merge pull request #9830 from bergzand/pr/usb/usbdev
...
usbdev: Introducing a generic USB device driver API
2019-03-14 22:48:47 +01:00
9af6c69a93
usbdev: Introduce a common API for USB peripherals
...
This commit adds usbdev, a common API to interface USB peripheral
devices. The API is split into two parts, one for the USB device itself
and one for the USB endpoint.
2019-03-14 21:44:56 +01:00
Leandro Lanzieri
e98de1a91a
drivers/ds3234: Fix doxygen group
2019-03-14 14:32:28 +01:00
Leandro Lanzieri
94a10e9e10
Merge pull request #11132 from MichelRottleuthner/pr_sx127x_add_gpio_pull_config
...
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-14 14:05:56 +01:00
Gilles DOFFE
dd6a37517b
drivers: add motor_driver API
...
This driver API aims to control DC motors.
It handles :
* motor controller associated to a PWM device
* several motors by controller
* motor rotation direction
* brake capability
* enable/disable motor individually
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Jose Alamos
893707a590
netdev/lora: add netdev_lora_rx_info structure
2019-03-08 17:45:08 +01:00
Michel Rottleuthner
389d258627
drivers/sx127x: add gpio pull config define for DIO pins
2019-03-07 16:09:38 +01:00
Semjon Kerner
c2a40be458
drivers/netdev_ieee802154: add mac header filter
2019-03-04 13:21:43 +01:00
Martine Lenders
2d6a557d83
netdev: introduce test device type
2019-02-26 16:46:21 +01:00
Joakim Nohlgård
a6f430b4b5
drivers/ds3234: Minimal driver for DS3234 extremely accurate RTC
...
This driver currently only supports the SPI connected DS3234, and only
for initializing 1 Hz square wave output on the SQW pin, nothing else.
2019-02-19 11:57:40 +01:00
Yegor Yefremov
0dedf979f3
drivers/sx127x: fix dead links
...
URLs of the datasheets have been changed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-15 21:16:42 +01:00
Leandro Lanzieri
85e75cf9f8
drivers/saul: Add capacitance and voltage types
2019-02-15 13:37:45 +01:00
Leandro Lanzieri
50dc5b7528
drivers: Add driver for AD7746 capacitance sensor
2019-02-15 13:31:18 +01:00
Yegor Yefremov
b8ff48cce4
periph/uart: improve documentation
...
Change description to reflect the configurability of the serial
interface.
Also, fix the uart_mode parameter description as the UART will be
configured and not initialized.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-11 09:35:23 +01:00
Yegor Yefremov
6bf185855b
drivers/bmx280: fix dead links
...
URLs have been changed to:
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001.pdf
https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280-DS002.pdf )
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-08 09:01:20 +01:00
Kees Bakker
50ec5130d6
drivers: add support for SHT2x (I2C temp and humidity sensor)
...
Several parts were inspired by a driver written by:
George Psimenos (gp7g14@soton.ac.uk )
Steffen Robertz (steffen.robertz@rwth-aachen.de )
2019-02-05 22:17:30 +01:00
Silke Hofstra
3cf3742f8c
hdc1000: fix documentation for HDC1000_PARAM_RENEW_INTERVAL
...
The documentation refers to the `HDC1000_PARAM_RENEW_INTERVAL` as
`HDC1000_RENEW_INTERVAL`.
2019-02-04 11:28:31 +01:00
smlng
03698502e3
netstats_l2: remove obsolete struct from xbee_t
2019-02-01 11:25:27 +02:00
smlng
b8d9610316
netstats_l2: remove obsolete struct from netdev_t
2019-02-01 11:25:27 +02:00
Kevin "Bear Puncher" Weiss
1d693403b6
Merge pull request #10743 from yegorich/uart-enhanced-settings
...
RFC: UART enhanced settings
2019-01-31 17:11:28 +01:00
Yegor Yefremov
ddf19783d7
periph/uart: add support for enhanced serial settings
...
As suggested in PR#5899 add a routine uart_mode() that will
setup data bits, stop bits and parity at runtime.
uart.h provides a set of enums defining these settings and each
platform will override them to specify values corresponding to
its configuration registers.
The idea behind the enums is to specify default settings i.e. 8N1
through the 0 value item. Invoking uart_mode(uart, 0, 0, 0) will
setup 8N1 mode.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-01-31 14:15:11 +01:00
Michel Rottleuthner
6cffa07ed1
drivers/saul: add sensor type for particulate matter
2019-01-30 13:15:17 +01:00
Michel Rottleuthner
f5dc2524d0
drivers: add driver for SDS011 active laser dust sensor
2019-01-30 13:15:17 +01:00
Marian Buschsieweke
db0c66e07f
drivers/ltc4150: Allow tracking last minute charge
...
Implemented an example `ltc4150_recorder_t` implementation as a proof of concept
for the recorder API.
2019-01-28 13:45:45 +01:00
Marian Buschsieweke
c00886ac39
drivers/ltc4150: (Re-)implemented LTC4150 driver
...
The LTC4150 is a coulomb counter (a.k.a. battery sensor or bidirectional
current sensor) that is used in the MSBA2 board and available for little money
as easy to use break out board.
2019-01-28 13:44:16 +01:00
Marian Buschsieweke
ac98c98a0d
drivers/saul: Added coulomb counter & ammeter
2019-01-28 13:33:18 +01:00
Ran Berant
59416fc6ce
drivers/at: make at_dev_init() return uart initialize status
...
in case there's an error uart_init() returns an error value,
this value indicates the reason for the error thus we should
return it from at_dev_init() so the user will be able to identify
whether the init succeded or failed.
2019-01-23 19:02:14 +02:00
Leandro Lanzieri
d9be249144
Merge pull request #10578 from MrKevinWeiss/pr/i2capi
...
drivers/i2c: Fix i2c api issues
2019-01-16 11:07:10 +01:00
Sebastian Meiling
501f8fddf8
Merge pull request #10716 from keestux/refactor-prototypes-pulse-counter
...
drivers/pulse_counter: refactor the prototypes of read funcs
2019-01-11 11:43:36 +01:00
Martine Lenders
6a8808c511
Merge pull request #10638 from maribu/gnrc_netif_cc1xxx
...
net/gnrc/netif: Added CC1xxx adaption layer
2019-01-10 11:45:53 +01:00
Marian Buschsieweke
ae7024b9a3
net/gnrc/netif: Added CC1xxx adaption layer
...
This adaption layer is intended to be used by a rewrite of the CC110x driver and
a new CC1200 driver that is currently being developed for RIOT.
2019-01-10 10:54:36 +01:00
Sebastian Meiling
6767caea5f
Merge pull request #10709 from keestux/eliminate-cast-ds18
...
drivers/ds18: refactor functions with const dev pointer
2019-01-10 09:17:53 +01:00
steffen
2ff2b2c1d7
drivers: Initial support for TPS6274x converter
...
drivers/tps6274x: initial support step-down converter
tests/driver_tps6274x: Added testcase for the step-down converter
boards/jiminy-mega256rfr2: Added TPS6274x config
2019-01-10 00:00:02 +01:00
Kees Bakker
8991c21d30
drivers/pulse_counter: refactor the prototypes of read funcs
...
This change makes it more clear that the dev is modified in some of the
read functions. Only pulse_counter_read_without_reset gets a const
pointer argument.
Also, use pulse_counter_t pointers instead of void pointers where
possible.
2019-01-09 23:06:54 +01:00
Peter Kietzmann
3cf8b4de38
Merge pull request #9887 from smlng/pr/driver/enc28j60
...
driver/enc28j60: cleanup
2019-01-09 10:31:43 +01:00
Kees Bakker
9ed7d2dc18
drivers/ds18: refactor functions with const dev pointer
...
All DS18 functions have a dev argument. All except the init function use
it as an IN parameter, so we can prototype it as const ds18_t*.
As a consequence we can drop the cast in read_temperature() in ds18_saul.c
which was the primary trigger for the changes.
The commit also follows the preferred convention that "params" is a field
in the device struct. Only the init function needs to write it.
2019-01-08 19:25:13 +01:00
Kees Bakker
1d5a67dcce
drivers/bh1750fvi: change prototype of bh1750fvi_init
...
The params argument is now a const pointer. This eliminates the need for
a type cast that converts a const to a non-const.
2019-01-07 21:37:02 +01:00
Kees Bakker
5265edcd26
drivers/adxk345: include copy of params in dev struct
...
This follows the usual convention of having the whole params in the device
struct instead of a pointer-to. This also eliminates the need to cast a
const to a non-const pointer in the init function.
2019-01-06 17:24:24 +01:00
MrKevinWeiss
b870dbb3b9
drivers/bh1750: Fix mislabeled i2c address
...
The i2c address when the pin is high/low are swapped.
This swaps them to match the datasheet and changes the default to low.
2019-01-03 09:08:31 +01:00
Martine Lenders
fa3d617e2e
Merge pull request #10657 from maribu/netdev_driver_pre
...
netdev_driver_t::recv(): Clarified documentation
2018-12-29 14:34:42 +01:00
Marian Buschsieweke
58f496de47
netdev_driver_t::recv: Extend doc on size feature
...
Some drivers return on netdev_driver_t::recv() not the actual frame size, but
an upper bound estimation of it. The upper layer code is already prepared to
handle that. This brings the doc in sync with the code.
2018-12-29 13:59:58 +01:00
Marian Buschsieweke
e81b6191aa
netdev_driver_t::recv: Clarified small buf case
...
Clarified in the documentation how netdev_driver_t::recv() should behave in case
the size of the buffer in parameter buf (indicated by parameter len) is to small
to fit the received frame.
2018-12-28 20:23:19 +01:00
Marian Buschsieweke
87055d7b6d
netdev_driver_t::recv: Added drop and size to doc
...
netdev_driver_t::recv does on of three things:
- Receive the frame
- Drop it
- Get (an estimation of) the size of the frame
The brief section of the documentation was changed to reflect this. (And it
starts with the least obvious thing in the hope readers of the API stumble upon
it...)
2018-12-28 20:23:11 +01:00
Marian Buschsieweke
b6069eb5f5
netdev_driver_t::recv: Fixed preconditions in doc
...
Removed the invalid precondition in netdev_driver_t::recv that the buffer never
NULL and the length positive. (In the "get message size" case both is wrong, in
the drop message case the first part is wrong.)
2018-12-28 20:22:57 +01:00
Martine Lenders
e13bc4285b
Merge pull request #10191 from fedepell/at_recv_bytes_1
...
drivers/at: add function to read raw data bytes from modem
2018-12-28 12:09:35 +01:00
Gunar Schorcht
3181a2faa7
drivers/ccs811: nWAKE and nRESET moved to base
2018-12-20 12:42:44 +01:00
Gunar Schorcht
d513e9d3d3
drivers/ccs811: fix build issues on AVR platform
2018-12-20 12:42:44 +01:00
Schorcht
74e1ab220c
drivers: add driver for CCS811 gas sensor
2018-12-20 12:42:44 +01:00
MrKevinWeiss
0ad94e1b4b
drivers/include/i2c: Fix API documentation
...
The write_reg/s states a repeated start write is used but that is not how the i2c is implemeneted.
Most devices also only use a continuous write so the API should be changed to match implementation and the majority of sensors.
2018-12-10 09:56:40 +01:00
Hauke Petersen
39f0e4d5d3
periph/uart: fix line length in doc header
2018-12-06 10:08:56 +01:00
1008ab4fdf
drivers/periph_eeprom: add eeprom_set function
2018-12-04 11:24:57 +01:00
50f19d1d1f
drivers/periph_eeprom: add clear and erase functions
2018-12-04 11:24:57 +01:00
Marian Buschsieweke
003c04bd4c
Merge pull request #10012 from gschorcht/drivers_sht3x
...
drivers: sht3x temperature and humidity sensor
2018-12-03 10:43:16 +01:00
Federico Pellegrin
e34d46e096
drivers/at: add function to read raw data bytes from modem
2018-11-30 14:59:00 +01:00
Martine Lenders
03b91cbcb8
esp_now: use NETDEV_TYPE_ESP_NOW as device type
2018-11-29 13:35:20 +01:00
Sebastian Meiling
4eaf1d8135
Merge pull request #10384 from bergzand/pr/netdev/ref_nid
...
netdev_ieee802154/radios: refactor PAN ID reset to generic ieee802154 reset
2018-11-28 12:15:45 +01:00
52e68735c3
kw2xrf: Remove PAN ID initialization from reset
2018-11-28 11:31:03 +01:00
d2ddc4ef2e
cc2420: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
6306308ef5
at86rf2xx: Remove PAN ID initialization from reset
2018-11-28 11:31:02 +01:00
Joakim Nohlgård
a867aeaba2
periph/i2c: Add precondition on i2c_acquire for i2c bus access
2018-11-28 08:43:01 +01:00
059af13933
Merge pull request #10306 from aabadie/pr/drivers/mma8x5x_update
...
drivers/mma8x5x: remove useless type from initialization parameters
2018-11-22 10:18:43 +01:00
Hauke Petersen
7af516a618
netdev: add funcs for declaring get/set as notsup
...
This commit adds two convenience functions that allow to declare
get() and/or set() as not supported when declaring a
netdev_driver struct.
2018-11-21 14:33:22 +01:00
Schorcht
9d59e27d41
drivers: add SHT3X humidity/temperature sensor
2018-11-21 08:48:20 +01:00
a63d76b346
drivers/mma8x5x: remove use of type param
...
Driver now accepts all variants of the driver
2018-11-20 10:41:45 +01:00
836fe3dbba
Merge pull request #9890 from bergzand/pr/ethos/sync
...
ethos: Only accept frame if previous frame is read
2018-11-14 22:41:52 +01:00
c4608ca0eb
ethos: Only accept frame if previous frame is read
2018-11-14 22:16:04 +01:00
Marian Buschsieweke
3cc6c7f465
drivers/saul: Added sensor type RSSI
2018-11-06 11:07:13 +01:00
danpetry
99ae495226
Merge pull request #10011 from leandrolanzieri/pr/drivers/ds18
...
drivers/ds18: Add Maxim Integrated 1-Wire temperature sensor driver
2018-10-25 17:26:10 +02:00
Frits Kuipers
8b8790c18f
drivers/ds18: Add Maxim Integrated ds18 driver
...
tests/driver_ds18: Add test application for DS18B20 sensor.
tests/driver_ds18: Add whitelist of boards
2018-10-24 16:02:05 +02:00
PeterKietzmann
1bcb521469
drivers/at86rf233: extend doc for smart idle listening feature
2018-10-23 20:02:39 +02:00
Peter Kietzmann
f5379c05a3
Merge pull request #8971 from Hyungsin/forupstream_smart_idle_listening
...
drivers/at86rf2xx: add smart idle listening feature
2018-10-23 19:34:21 +02:00
danpetry
a1a834a726
drivers/tsl4531x: Add power modes; redesign
...
Changes include:
- Implementation of two power modes for the driver: low and high
- Redesign and API change to the description in tsl4531x.h
- Full documentation
- Changing file structure and implementation to fit best practices as
described in
https://github.com/RIOT-OS/RIOT/wiki/Guide%3A-Writing-a-device-driver-in-RIOT
- Including I2C addresses for the rest of the range
2018-10-23 17:26:28 +02:00
Juan Carrano
5604abcedc
drivers/tsl4531x: Add SAUL driver.
2018-10-23 17:26:28 +02:00
Juan Carrano
63dcc18c55
drivers/tsl4531x: Add driver for TSL45315 illuiminance sensor.
...
Missing run modes and power saving configurations, but otherwise
functional.
2018-10-23 17:26:28 +02:00
José Alamos
b3ec93d957
Merge pull request #10088 from unwireddevices/riot-fix-adxl345
...
drivers/adxl345: fix ADXL345 driver
2018-10-16 16:34:41 +02:00
e9a6ebc409
cpu: drivers/eeprom: refactor periph_eeprom implementation
2018-10-16 10:39:10 +02:00
Gunar Schorcht
7fde6fc258
Merge pull request #6712 from aabadie/driver_vcnl4010
...
drivers/vcnl4010: initial implementation
2018-10-15 16:12:45 +02:00
Oleg Artamonov
631c16fdb1
drivers/adxl345: fix range values
2018-10-15 14:57:55 +02:00
Oleg Artamonov
fb65067d3a
drivers/adxl345: fix ADXL345 driver
2018-10-15 14:57:55 +02:00
1ca44cf072
drivers/vcnl40x0: initial implementation
2018-10-15 11:44:10 +02:00
Martine Lenders
0598d5bcf1
periph_gpio: comment IRQ #endif correctly
2018-10-09 15:11:45 +02:00
Martine Lenders
a95957e513
Merge pull request #9992 from haukepetersen/fix_periph_gpiofeaturesscope
...
periph/gpio: fix scope of GPIO_IRQ submodule
2018-10-09 15:10:39 +02:00
0c53bebe1b
Merge pull request #10094 from silkeh/enable-bme280-doc
...
drivers/bmx280: improve documentation
2018-10-04 10:56:16 +02:00
Martine Lenders
aba75be827
netdev: fix return value and precondition doc
...
While reviewing #9942 I noticed that the documentation on the netdev
driver API is unclear and in some cases outright contradicting itself:
> ```
> @return number of bytes used from @p value
> @return `< 0` on error, 0 on success
> ```
IMHO this is unacceptable for such a central API where communication
This fixes a few things and also clarifies preconditions:
- Specifies negative `errno`s clearly so all drivers return the same
when required
- Re-iterates parameter preconditions and special cases within the
parameter documentation itself (might also help towards #9805?)
- Fixes contradictions within return value documentation
- Adds missing parameter documentation on `init()`.
2018-10-03 16:09:42 +02:00
Silke Hofstra
2fb2776012
drivers/bmx280: improve documentation
...
- Add minimal usage instructions
- Ensure that the `bme_280_read_humidity` function (only available on
the BME280) is included in the documentation.
- Fix a typo
2018-10-01 21:28:11 +02:00
6dfc07b076
drivers/sx127x: remove useless rx timeout setter
2018-09-25 22:22:13 +02:00
Joakim Nohlgård
c4016fcf3b
Merge pull request #9978 from haukepetersen/fix_periph_gpiofeaturescopeanddoc
...
periph/gpio: fix doc of `periph_gpio_irq` submodule
2018-09-21 13:15:19 +02:00
Hauke Petersen
bd66184eb2
periph/gpio: re-add irq functions to doxygen
2018-09-21 08:31:09 +02:00
Hauke Petersen
abc11c8e23
periph/gpio: fix scope of GPIO_IRQ submodule
...
Move the gpio_irq_enable() and gpio_irq_disable() functions
into the scope of the PERIPH_GPIO_IRQ submodule.
2018-09-21 08:30:29 +02:00
Semjon Kerner
b24de4a22a
drivers/srf04: initial driver implementation
2018-09-20 15:18:49 +02:00
Leandro Lanzieri
5cc7b6711f
drivers/sx127x: add preliminar multi interrupt pin support
...
drivers/sx127x: add option to use or not multi dio
2018-09-18 14:02:31 +02:00
smlng
a9e848f648
periph/rtt: add missing std header
...
The periph/rtt.h uses `uintX_t` typedefs but misses the required
standard header file, namely `stdint.h`, which is added here.
2018-09-07 14:54:23 +02:00
smlng
f35e4786f3
drivers/enc28j60: always set memory bank, if valid
...
Simplify handling of memory banks, ie. remove check if current bank
is target bank and set it explicitly every time.
2018-09-05 13:26:08 +02:00
smlng
4759f691fc
drivers/enc28j60: cleanup
...
Simplify usage of params via MACROs and copy params struct instead
of (re)assigning values to driver struct. Overall code cleanup.
2018-09-05 13:26:08 +02:00
Joakim Nohlgård
ace717ee27
drivers: Add dep on periph_gpio_irq in drivers using GPIO IRQ
2018-08-29 08:53:20 +02:00
9f8386c215
drivers*: add saul doc group to related drivers
2018-08-27 11:32:20 +02:00
Martine Lenders
0f91735280
Merge pull request #9129 from OTAkeys/pr/mtd_spi_nor_4byte
...
mtd_spi_nor: add 4-byte address flash support
2018-08-24 22:22:52 +02:00
608e92e0be
drivers/ata8520e: small improvements
...
- move ata8520e_status from public interface to private implementation
- add useful references to the datasheet
2018-08-24 15:47:24 +02:00
Hauke Petersen
c2184f3454
boards/cpu/drivers/sys: use generic stdio_ if
2018-08-22 10:54:25 +02:00
463b04aa74
Merge pull request #7067 from dylad/adxl345_fix
...
drivers/adxl345: fixes & cleanup
2018-08-22 10:23:46 +02:00
d94d1854ec
Merge pull request #9234 from kYc0o/move_eeprom_to_periph
...
drivers/periph_common/eeprom: move EEPROM definitions to periph_cpu.
2018-08-21 10:25:44 +02:00
7425ac92aa
Merge pull request #9581 from bergzand/pr/at86rf2xx/flag_refactor
...
at86rf2xx: Move flags from netdev to radio
2018-08-17 10:51:23 +02:00
Francisco Acosta
71d3c14354
drivers/periph_common/eeprom: remove the now unnecessary cpu.h include
2018-08-15 15:27:03 +02:00
Hyungsin
e0d3f5b552
drivers/at86rf2xx: add smart idle listening feature
2018-08-06 13:56:42 -07:00
Hyungsin
88895bbed9
drivers/hdc1000: change renew_interval to a parameter
2018-08-06 12:33:53 -07:00
dylad
d114e2852c
drivers/adxl345: fixes & cleanup
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-08-03 11:12:25 +02:00
Michael Andersen
e354824bcf
drivers/mma7760: Add initial support
2018-08-02 15:52:58 +02:00
smlng
76d3a4e30a
driver/srf08: remove leftover doc
...
Remove doc for params and return values which are not used
anymore after I2C API rework.
2018-07-25 12:01:40 +02:00
smlng
2db2ce2dc7
doc: rename sections in i2c.h
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
2e6ff0f197
drivers/ds1307: remove unused clock param
2018-07-25 12:01:40 +02:00
Michel Rottleuthner
df52d6b1b8
drivers/bh1750fvi: remove unused clock param
2018-07-25 12:01:40 +02:00
0b78a1bec5
drivers/isl29020: rework driver API and params definition
2018-07-25 12:01:39 +02:00
Matthew Blue
bc9b3ecaae
*/ads101x: copyright notice update
2018-07-25 12:01:39 +02:00
95a4d8d4e7
drivers/tsl2561: rework API for consistency
2018-07-25 12:01:39 +02:00
MrKevinWeiss
d0f86d0611
drivers/srf02: Update to new i2c API
2018-07-25 12:01:38 +02:00
MrKevinWeiss
0c0ae1855d
drivers/srf08: cleanup and fixes for new api
2018-07-25 12:01:38 +02:00
Michel Rottleuthner
e5976ad497
drivers/isl29125: update parameter definition scheme
2018-07-25 12:01:38 +02:00
Bas Stottelaar
a8a9283f7a
drivers: si70xx: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
Bas Stottelaar
76b1200460
drivers: bmx280: adapt to new I2C api.
2018-07-25 12:01:38 +02:00
a85fbd2c75
sys/auto_init: update tcs37727 auto_init
2018-07-25 12:01:38 +02:00
a48a90f234
drivers/tcs37727: use new driver params scheme
2018-07-25 12:01:38 +02:00
2ace1a2dfe
drivers/l3g4200d: rework driver API and params definition
2018-07-25 12:01:38 +02:00
d81cf561b0
drivers/lsm303dlhc: rework driver API and params definition
2018-07-25 12:01:38 +02:00
d1a19db350
drivers/lps331ap: adapt to new I2C api
2018-07-25 12:01:38 +02:00
71d8b80512
drivers/lps331ap: rework driver API and params definition
2018-07-25 12:01:38 +02:00
a2d1558922
drivers/bmp180: adapt to new I2C api
2018-07-25 12:01:38 +02:00
7a12293eb1
drivers/at30tse75x: adapt to new I2C api
2018-07-25 12:01:38 +02:00
dylad
ef8ed2620c
periph_common/i2c: introduce new ret codes scheme
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
872251d011
periph/i2c: Add 10 bit addressing magic number definition
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
f2a2427fcd
periph/i2c: Editorial changes to i2c.h
2018-07-25 12:01:34 +02:00
01509b294f
drivers/periph_i2c: i2c_init should return void
2018-07-25 12:01:34 +02:00
Joakim Nohlgård
1dfc5f8f52
periph/i2c: Editorial doc changes
2018-07-25 12:01:34 +02:00
6f25886d77
drivers/periph/i2c: fixes issues in API
...
- non matching doxygen input parameter to i2c_write_reg
- non/matching missing function parameter
- invalid return type to i2c_release
2018-07-25 12:01:34 +02:00
dylad
e11a37df03
drivers/i2c: modify I2C API
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Hauke Petersen
45ab3ea89d
drivers/periph: introduced new I2C interface
2018-07-25 12:01:34 +02:00
Gunar Schorcht
738c1161c0
enc28j60: improvements to fix #9043
2018-07-17 19:19:15 +02:00
d9d99f9e24
at86rf2xx: Move flags from netdev to radio
...
The flags from the ieee802154 struct are only used in the radio code.
there is no advantage of having them in the netdev_ieee802154_t struct
if the flags are defined differently per radio driver.
2018-07-17 11:15:12 +02:00
Vincent Dupont
21867b2867
drivers/at: ad poweron/off functions
2018-07-17 10:02:36 +02:00
Peter Kietzmann
fd8ef789b7
Merge pull request #9531 from bergzand/pr/netdev/reset_refactor
...
netdev_ieee802154: Add and use common reset function
2018-07-13 12:01:14 +02:00
Vincent Dupont
071614bf04
Merge pull request #8543 from OTAkeys/pr/rtt_clean_up
...
periph_rtt: remove RTT_NUMOF guard and init from periph_common
2018-07-10 15:00:53 +02:00
123b275b23
netdev: Add common ieee802154 reset function
...
Resets flags, sequence number and protocol.
2018-07-10 14:27:52 +02:00
4ea93f3aea
Merge pull request #8542 from OTAkeys/pr/at_oob
...
drivers/at: at out-of-band data support for at commands parser
2018-07-04 19:01:28 +02:00
Joakim Nohlgård
904c583038
Merge pull request #8697 from aabadie/pr/drivers/params/lis3dh
...
drivers/lis3dh: apply unified driver params scheme + cleanup
2018-06-28 10:52:48 +02:00
6e6716a1a6
Merge pull request #9317 from maribu/sht1x
...
drivers/sht11: Major refactoring
2018-06-27 10:10:39 +02:00
Marian Buschsieweke
de9b67bdc2
drivers/sht1x: Major refactoring
...
- Use RIOT's GPIO interface to access the sensor to increase portability
- Changed API to allow more than one sensor per board
- Added `sht1x_params.h` that specifies how the sensors is connected - each
board can overwrite default settings by #defining SHT1X_PARAM_CLK and
SHT1X_PARAM_DATA
- Changed arithmetic to use integer calculations only instead of floating point
arithmetic
- Added support for checking the CRC sum
- Allow optional skipping of the CRC check to speed up measuring
- Added support for advanced features like reducing the resolution and skipping
calibration to speed up measuring
- Allow specifying the supply voltage of sensor which heavily influences the
temperature result (and use that information to calculate the correct
temperature)
- Reset sensor on initialization to bring it in a well known state
- Support for the obscure heater feature. (Can be useful to check the
temperature sensor?)
- Updated old SHT11 shell commands to the new driver interface, thus allowing
more than one SHT10/11/15 sensor to be used
- Added new shell command to allow full configuration of all attached SHT1x
sensors
- Removed old command for setting the SHT11 temperature offset, as this feature
is implemented in the new configuration command
2018-06-27 08:58:00 +02:00
Marian Buschsieweke
d208c224b0
drivers: Renamed module sht11 to sht1x
...
The sensor family SHT10, SHT11 and SHT15 only differ in their accuracy (as in
calibration, not as in resolution). Thus, the same driver can be used for all.
The new driver name better reflects this fact.
2018-06-27 08:57:58 +02:00
Hyungsin
0c5c3d9b77
driver/pir: add pir-based occupancy sensing
2018-06-26 13:46:37 -07:00
Vincent Dupont
3393888cea
drivers/at: add URC registering and parsing feature
2018-06-26 10:03:10 -07:00
42c4460daf
Merge pull request #9325 from aabadie/pr/saul/tvoc_ppb
...
drivers/saul :sys/phydat: add definitions for TVOC sensor type and PPB unit
2018-06-25 12:20:11 +02:00
ceb9710b3e
drivers/at: make OK and ERROR replies configurable
2018-06-13 09:49:13 +02:00
a08e9919a9
drivers: fix doxygen grouping
2018-06-11 19:10:40 +02:00
698fbf98cc
drivers/saul: add definitions TVOC sensor type
2018-06-11 15:46:21 +02:00
ad31664f48
Merge pull request #9185 from OTAkeys/pr/add_at_parser_eol
...
driver/at: add option to keep EOL character in readline, and make EOL configurable
2018-05-29 19:57:12 +02:00
Vincent Dupont
3f620d582d
at: make receive EOL configurable
2018-05-29 17:30:55 +02:00
Vincent Dupont
3f94bd20f4
drivers/at: add option to keep CR char
2018-05-29 17:30:55 +02:00
Marian Buschsieweke
b4f70be9ef
drivers: Fixed struct documentation for cc110x
2018-05-24 19:16:52 +02:00
9fa58af73b
drivers/periph: add API for internal MCU EEPROM
2018-05-24 14:07:55 +02:00
0199f36bb3
drivers: at: many improvements
2018-05-23 16:08:28 +02:00
Vincent Dupont
7340e77328
drivers/at: add at_send_cmd_wait_prompt and at_send_bytes
2018-05-23 16:08:28 +02:00
Vincent Dupont
ee29b76c89
drivers/at: make EOL char configurable
2018-05-23 16:08:28 +02:00
9c9fad6da5
drivers: initial commit of generic AT parser module
2018-05-23 16:08:28 +02:00
Vincent Dupont
53b3d1af78
mtd_spi_nor: add 4-byte address flash support
2018-05-14 15:05:24 +02:00
1f436e2486
Merge pull request #8965 from aabadie/pr/drivers/io1_xplained_enh_sd
...
drivers/io1_xplained: improve driver and add support for the sdcard and light sensor
2018-05-14 09:00:47 +02:00
372aadd626
Merge pull request #8978 from Hyungsin/forupstream_fxos8700
...
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-14 08:45:58 +02:00
Hyungsin
beaf08bcb2
drivers: add driver for FXOS8700 3-axis accelerometer/magnetometer
2018-05-12 17:51:58 -07:00
f9c75d0df7
Merge pull request #8915 from ZetaR60/RIOT_ads101x
...
drivers/ads101x: support for ADCs
2018-05-03 08:31:03 +02:00
Joakim Nohlgård
fef0be8c4c
pulse_counter: Editorial changes to docs
2018-04-28 15:37:41 +02:00
734256aab6
drivers/io1_xplained: add support for light sensor
2018-04-17 11:06:01 +02:00
438aa09148
drivers/io1_xplained: add support for sdcard
2018-04-17 10:49:45 +02:00
4ceb309927
drivers/io1_xplained: refactor implementation
...
- directly use underlying drivers api (gpio, at30tse75x)
- use debug instead of log + rework messages
2018-04-17 10:48:48 +02:00
Matthew Blue
073d45aa4d
drivers/ads101x: initial support
2018-04-13 11:38:49 -04:00
1bee32c75f
drivers/sx127x: refactor error management
2018-04-12 10:00:24 +02:00
Hauke Petersen
3b6c8f25de
sys/net: added generic BLE defines
2018-04-06 11:18:53 +02:00
Hauke Petersen
4e715e8221
drivers/netdev: added BLE adaption for netdev
2018-04-06 11:18:53 +02:00
Martine Lenders
76edd4eb1e
Merge pull request #8198 from bergzand/wip/netdev_layered
...
netdev: Initial implementation of a more layered approach to netdev
2018-03-28 12:23:27 +02:00
8a63b88623
netdev_layer: initial import of layered netdev API
2018-03-28 11:19:09 +02:00
9328a1f2a2
drivers/sx127x: make paselect configurable
2018-03-26 09:38:35 +02:00
