RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
39,240 Commits 40 Branches 189 Tags 262 MiB
9ca3dd5d4b
Commit Graph

56 Commits

Author SHA1 Message Date
benpicco
9ca3dd5d4b
Merge pull request #17656 from benpicco/vfs_default-test 
vfs_default: add compile test and add default mount for more boards
 2022-03-29 13:47:08 +02:00
Francisco
52f12e0734
Merge pull request #17711 from benpicco/periph_init_buttons 
drivers/periph_common: add periph_init_buttons to init on-board buttons
 2022-03-29 10:29:39 +02:00
Benjamin Valentin
2d352306ea boards/same54-xpro: use default mount point 2022-03-29 10:24:01 +02:00
Alexandre Abadie
562cc9bba8
boards/samd51: adapt ADC configuration 2022-03-17 11:45:06 +01:00
Benjamin Valentin
615d863c00 boards: drop manual button auto-init 2022-02-26 22:51:50 +01:00
Benjamin Valentin
5d111e71aa boards: drop board_init() from board.h 2022-02-25 15:08:58 +01:00
Benjamin Valentin
468ea89953 boards: drop LED init 
This is handled by periph_init_leds now
 2022-02-18 14:35:43 +01:00
Benjamin Valentin
33e1d38dae boards/same54-xpro: default to using littlefs2 on external flash 2022-02-14 13:04:37 +01:00
Benjamin Valentin
407851095d boards/same54-xpro: support for board variation with SST26VF064B flash 2022-02-04 12:17:17 +01:00
MrKevinWeiss
f98128f0fb
boards/same54-xpro: Kconfig mtd model 2021-11-29 09:12:28 +01:00
MrKevinWeiss
f6b9637c82
boards/same54-xpro: Add SAUL_GPIO to kconfig 2021-11-29 09:12:23 +01:00
Benjamin Valentin
fc88c4c4e5 boards: drop cpu_init() 2021-10-13 23:36:41 +02:00
Benjamin Valentin
c161fd8dbf boards/same54-xpro: lock EUI provider to ethernet interface 
Otherwise the provider can be used for multiple interfaces but only
return a single MAC address for all of them.
 2021-06-08 14:01:03 +02:00
benpicco
6929577c76
Merge pull request #15845 from benpicco/boards/adafruit-itsybitsy-m4 
boards: add adafruit-itsybitsy-m4
 2021-02-09 19:41:43 +01:00
Benjamin Valentin
73f58bfa04 cpu/samd5x: Kconfig: don't provide periph_eth on CPU level 
It's up to the board to expose it.
 2021-02-09 16:15:33 +01:00
Benjamin Valentin
50c2cb727d boards/same54-xpro: update implementation status 
The table has not been touched since initial support for the board
was added.
 2021-01-31 19:43:05 +01:00
Benjamin Valentin
57f40e5afb boards/same54-xpro: expose at24mac as MTD_1 2021-01-26 11:40:59 +01:00
Martine Lenders
6646682873
Merge pull request #15611 from benpicco/boards/eui_provider.h 
net/eui_provider: API cleanup
 2020-12-18 15:02:57 +01:00
Benjamin Valentin
d4acf95a27 net/eui_provider: drop useless EUI provider arg parameter 
This has never been used and we might as well define a second
callback function instead of using a generic one with an arg.
 2020-12-14 00:22:43 +01:00
Benjamin Valentin
9c20540e3d boards/same54-xpro: move EUI provider config to eui_provider_params.h 2020-12-14 00:22:42 +01:00
Benjamin Valentin
fe9ae5bc80 net/eui_provider: provide index to the callback function 
If the same callback function is used for multiple interfaces
(`NETDEV_INDEX_ANY`), it is necessary to also provide the index of
the interface to hand out and address.
 2020-12-14 00:22:18 +01:00
dylad
3937aff923 board/same54-xpro: add Ethernet configuration 2020-12-13 22:01:50 +01:00
Benjamin Valentin
09c6d2c4db boards/same54-xpro: add configuration for SPI flash 2020-12-12 18:36:16 +01:00
Benjamin Valentin
182cb9d44b boards/same54-xpro: add EUI-48 provider 
Use the on-board AT24MAC chip as an EUI-48 provider.
 2020-09-04 13:36:21 +02:00
János Brodbeck
96fd915b76
boards/same54-xpro: add ADC periph_conf 2020-08-19 18:00:30 +02:00
Leandro Lanzieri
8dc7a6bc39
boards/same54-xpro: Add Kconfig symbols 2020-07-16 15:33:33 +02:00
benpicco
30ebabb84e
Merge pull request #14007 from benpicco/cpu/sam0_common-pwm 
cpu/sam0_common: move PWM to common code, add support for saml21, samd5x
 2020-07-09 10:01:08 +02:00
Benjamin Valentin
9500b651dc boards/same54-xpro: configure LED0 as PWM output 2020-07-08 21:51:12 +02:00
Benjamin Valentin
cd76c95560 boards/same54-xpro: use new GCLK names 2020-06-20 00:25:54 +02:00
Benjamin Valentin
1ad56364cc boards/same54-xpro: enable buck converter 2020-06-20 00:25:53 +02:00
Benjamin Valentin
7242835905 boards/same54-xpro: provide config to run off XOSC 
The board provides a 12 MHz oscillator that can be used to source
the CPU and peripheral clocks.
When doing so we don't have to rely on the internal fast oscillators.
This allows us to enable the buck regulator for maximum power savings.

With this same54-xpro reaches 0.8 mA in IDLE.
 2020-06-20 00:25:53 +02:00
Francisco Molina
36baec4512
cpu/samd5x: add unified rtt configuration 2020-06-19 09:16:23 +02:00
Koen Zandberg
35bf7d5b41
same54-xpro: add DMA triggers to spi config 2020-06-14 14:56:21 +02:00
Benjamin Valentin
54b57bd97f cpu/sam0_common: drop prescaler from timer config 
since c05984b341 the prescaler in the timer
config struct is no longer used.

Let's remove it.
 2020-06-11 19:29:43 +02:00
Benjamin Valentin
d4b601327b boards/same54-xpro: enable DAC 
Both PA2 and PA5 are exposed on the board, so we can enable the DAC
feature.
 2020-05-02 18:31:55 +02:00
Benjamin Valentin
9ca480abf1 boards/same54-xpro: configure remaining EXT connectors 
Add configuration for all UARTs, SPI and I2C buses available on EXT
connectors.
 2020-03-24 01:16:47 +01:00
Dylan Laduranty
88bb019438 boards/sam0: update to use generic uart_hw_fc module 2020-03-10 14:22:34 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom 
Driver for AT24CXXX EEPROM
 2020-02-25 18:16:45 +01:00
benpicco
77d6eaaf19
Merge pull request #13461 from benpicco/sam_xpro-led-fix 
boards/samXXX-xpro: clear LED on init
 2020-02-24 21:56:36 +01:00
Benjamin Valentin
bc5ac92cff boards/samXXX-xpro: clear LED on init 
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
 2020-02-24 19:44:36 +01:00
fabian18
07f7d818bd boards/same54-xpro: use at24cxxx EEPROM 2020-02-24 14:00:25 +01:00
Benjamin Valentin
3ee7b72431 boards/same54-xpro: don't source peripheral clocks from main clock 
Use the dedicated 48 MHz clock as a source for the peripheral clocks.
This was already done for I2C to allow it to work despite the 120 MHz
main clock.

Not running the peripherals off the main clock will allow for dynamic
re-clocking of the main clock in the future, without affecting the
operation of the peripherals.

It also gives more flexibility to the main clock selection in general.
 2020-02-19 17:52:12 +01:00
Benjamin Valentin
02e1c0a4ed boards/same54-xpro: add configuration for AT24MAC402 2020-02-13 15:58:43 +01:00
Benjamin Valentin
c4e0ed4b79 boards: use explicit GCLK_SRC defines 2020-02-04 21:17:00 +01:00
Benjamin Valentin
4fbca251bc boards/same54-xpro: use 48 MHz GCLK6 for I2C 
We can't run I2C off the 120 MHz main clock as the availiable dividers are too small.
Use the 48 MHz GCLK 6 instead which offers an appropriate frequency.

fixes #12037
 2020-02-04 21:16:54 +01:00
Benjamin Valentin
1496149bba cpu/sam0: don't hard-code peripheral clocks 
Instead of hard-coding the peripheral clocks to CLOCK_CORECLOCK
introduce helper functions to return the frequency of the individual
GCLKs and use those for baud-rate calculations.

This requires the GCLK to be part of the peripheral's config struct.
While this is already the case for most peripherals, this also adds
it for those where it wasn't used before.

As it defaults to 0 (CLOCK_CORECLOCK) no change is to be expected.
 2020-02-04 21:06:21 +01:00
Benjamin Valentin
a51d167a43 cpu/sam0: use GCLK ID instead of bitmask 
To simplify board definitions and for unification between samd2x and
newer models, don't use the GCLK bitmask in board definitions.
Instead use the GCLK index and generate the bitmask when needed.
 2020-02-04 21:06:21 +01:00
Benjamin Valentin
bd19a55804 boards: remove EDBG_DEVICE_TYPE 
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
 2020-01-31 09:35:27 +01:00
dylad
fc9549b069 boards/sam0: update sam0-based board to use hw fc 2019-12-20 21:26:56 +01:00
Benjamin Valentin
0d977b3b3c cpu/sam0_common/periph/uart: implement buffered write 
Implement interrupt based uart_write() using a tsrb for the TX buffer.

To enable it, add

    USEMODULE += periph_uart_nonblocking

to your Makefile.
 2019-11-27 19:01:00 +01:00