There are new pseudomodules for this driver:
- atwinc15x0_static_connect: Should behave as before, by trying to connect to an AP
by specified WIFI_SSIS and WIFI_PASS
- atwinc15x0_dynamic_connect: takes connection request via NETOPT_CONNECT
and provides the connection result via callback
- atwinc15x0_dynamic_scan: takes network scan requests via NETOPT_SCAN
and provides the scan result as a sorted list via callback
19823: dist/tools/usb-serial: call ttys.py with its path r=maribu a=dylad
### Contribution description
This PR provides a fix for #19805
When calling `SERIAL=xxx make flash` the command failed because the script `dist/tools/usb-serial/find-ttys.sh` tries to call `ttys.py` but it doesn't find it. So pass the full path to `ttys.py` to get rid of the problem.
### Testing procedure
Connect at least two boards to your computer
run `make list-ttys ` to get the ID of your boards
Try to flash one of them with (replace SERIAL with the one you get with the previous command):
`BOARD=xxx SERIAL=xxx make -C tests/leds flash`
It fails on master.
It should works with this PR.
### Issues/PRs references
Fixes#19805
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19798: cpu/nrf53: add I2C and SPI support r=benpicco a=dylad
### Contribution description
This PR provides support for nRF53 SPI and I2C.
It also moves common structs from each nRF CPU folder to `cpu/nrf5x_common` to avoid duplication.
Moreover, since nRF9160 and nRF5340 have shared IRQ for UART/SPI/I2C. Both this families now use a common file to register and manage these interrupts. Note that nRF9160 have different name for its interrupts than nRF5340 but they have the same purpose.
### Testing procedure
Since some structs were moved around, I think this PR should be carefully tested against nRF52, nRF53 and nRF9160 to avoid any issues.
On nRF5340DK-APP, SPI can be tested with its onboard SPI flash.
### Issues/PRs references
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19806: ztimer/periodic: remove timer on init if already running r=kaspar030 a=benpicco
19814: boards/sipeed-longan-nano: revert default to variant with TFT r=benpicco a=gschorcht
### Contribution description
This PR reverts commit 69fb00bdfa to fix CI compilation.
### Testing procedure
Green CI with full build.
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19816: drivers/lcd: code deduplication for st7735 and ili9341 r=aabadie a=gschorcht
### Contribution description
In preparation for the parallel interface support the following changes were made:
1. The code for basic communication (acquire/release SPI device, SPI transfers), which were always duplicated by copy & paste in each display driver again and again, has been moved to the LCD driver as low-level functions that are now used by the display drivers. These low level function allow
- code deduplication and
- to define a more abstract communication interface that can then be extended later by parallel communication interface
2. Identical GPIO initializations has also been moved from display drivers to the LCD driver.
3. Using a default implementation of `lcd_set_area` function allows further code deduplication.
Finally, the `ili9341` and `st7735` drivers only implement the inialization sequence for the LCD driver IC.
### Testing procedure
`tests/drivers/ili9341` should still work for a board with an ILI9341. Tested with `esp32-wrover-kit`.
`tests/drivers/st7735` should still work for a board with a ST77xx. Tested with `esp32s3-usb-otg`.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
In preparation for the parallel interface support the following changes were made:
1. The code for basic communication (acquire/release SPI device, SPI transfers), which were always implemented identically in the individual display drivers again and again, have been moved to the LCD driver as low-level functions and are now used by the display drivers. These low level function allow
- code deduplication on one hand and
- to define a more abstract communication interface on the other hand that can then be extended by parallel communication
2. Identical GPIO initialization has also been moved from display drivers to the LCD driver.
For now, nRF53 and nRF9160 will shared UART/I2C/SPI IRQs, nRF52 will reuse the same callback but will keep its own file to avoid breakage. This can be continue in a followup PR
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
- periph/eeprom.c
- periph/wdt.c
- periph/gpio_ll_irq.c
removed unsupported cpuid and dpgpin feature for atmega8 cpu familly
pkg/qdsa: bump the commit hash bump the commit hash after RIOT-OS/qDSA#4
was merged
19777: cpu/avr8_common: Prepare for rework ISR r=benpicco a=nandojve
### Contribution description
This prepares for rework how ISR is handled for AVR-8 platform. It is not expected changes on the behavior but tests on other boards were welcome to avoid regressions.
#### Improvements
* Split UART state from ISR states. Now it is necessary two variables and GPIORx registers are automatically selected when available.
* UART states now supports up to 8 UARTs.
* Added AVR8_ISR macro do clean-up and hide internals related to ISR processing. This allows changes on ISR without any other changes on drivers.
### Testing procedure
Tests were conducted using atmega328p-xplained-mini and atxmega-a1u-xpro and the zigduino board was only built. The example thread_duel was used to test regressions.
Co-authored-by: Gerson Fernando Budke <nandojve@gmail.com>
19764: drivers/shield_w5100: add module for the W5100 Ethernet Shield r=benpicco a=maribu
### Contribution description
This module provides no more than the correct configuration parameters for the `w5100` driver using the Arduino I/O mapping features. But by doing so, it will work out of the box with every mechanically and electrically compatible board for which the Arduino I/O mapping features are implemented.
19781: cpu/nrf{53,9160}: add pwm support r=benpicco a=dylad
### Contribution description
This PR moves the nRF52 PWM driver to `cpu/nrf5x_common` to allow nRF9160 and nRF53 to use this driver.
IP is identical on these families.
I didn't test on nRF9160DK and I didn't test if there is any regression on nRF52-based board as I don't have any so tests are welcome !
However it works fine on nRF53-based board.
### Testing procedure
Flash the `tests/periph/pwm` test application on `nrf5340dk` or `nrf9160dk`.
You can then use the `osci` command to make the onboard LEDs "breath".
You can also attach an oscilloscope and/or logic analyzer to watch the signal.
### Issues/PRs references
~~Based on #19769~~
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: dylad <dylan.laduranty@mesotic.com>
19813: buildsystem: fix kconfig mismatches r=gschorcht a=maribu
### Contribution description
This adds three commits each addressing a deviation between dependency resolutions done with and without Kconfig. Hopefully, these in combination should fix the nightly builds.
### Testing procedure
For each `$failing_board` and `$failing_app` pair in the latest nightly build, do:
```
make BOARD=$failing_board -C $failing_app TEST_KCONFIG=0 info-modules > ~/without-kconfig
make BOARD=$failing_board -C $failing_app TEST_KCONFIG=1 info-modules > ~/with-kconfig
diff -rupN ~/without-kconfig ~/with-kconfig
```
should yield an empty diff other than the `=== [ATTENTION] Testing Kconfig dependency modelling ===`.
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
In KConfig `MODULE_ST7789` now is hidden module that automatically
gets selected when `HAVE_ST7789` is selected in `MODULE_ST7735` is used.
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Without KConfig presence of the TFT is assumed in anycase, with KConfig
it is optional. This turns the opt-in into an opt-out to match behavior
with make by default, fixing the nightly breakage.
19811: boards: add ESP32-S3-Box support r=gschorcht a=gschorcht
### Contribution description
This PR provides the support for the [ESP32-S3-Box](https://github.com/espressif/esp-box).
### Testing procedure
The board has been tested with all basic tests for supported hardware including `tests/drivers/ili9341`:
- [x] tests/drivers/ili9341
- [x] tests/periph/gpio
- [x] tests/periph/i2c
- [x] tests/periph/spi
- [x] tests/periph/uart
- [x] tests/sys/usbus_cdc_ecm
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
This module provides no more than the correct configuration parameters
for the `w5100` driver using the Arduino I/O mapping features. But
by doing so, it will work out of the box with every mechanically and
electrically compatible board for which the Arduino I/O mapping
features are implemented.
