Juan I Carrano
d4edbea332
Merge pull request #11454 from cladmi/pr/frdm-k64f/hack/hwrng
...
boards/frdm-k64f: hack disable periph_hwrng as it crashes
2019-04-29 11:40:40 +02:00
Yegor Yefremov
2c41c9e094
boards/lobaro-lorabox: make sx127x definition consistent
...
No need to specify SX127X_PARAMS structure as it is already
defined in drivers/sx127x/include/sx127x_params.h.
Also remove SX127X_PARAM_SPI and SX127X_PARAM_PASELECT as their
values are the same as default ones.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-29 09:07:29 +02:00
Gaëtan Harter
8f9c629aaf
boards/frdm-k64f: hack disable periph_hwrng as it crashes
...
Use the same disable as in `frdm-kw41z`.
2019-04-26 12:09:55 +02:00
Yegor Yefremov
3d6bc49d9a
boards/esp32-olimex-evb: fix comment typo
...
Replace "ob-board" with "on-board" in LED description.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-17 16:59:48 +02:00
ccebd2bd2f
boards/calliope-mini: enable pyocd programmer option
2019-04-17 14:09:29 +02:00
b4fcccc8fe
boards/calliope-mini: use dap adapter with openocd
2019-04-17 14:08:02 +02:00
Yegor Yefremov
46060cf779
boards/esp32*: revise CAN support
...
CAN interface is now supported in RIOT. Change feature tables
accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-11 07:34:29 +02:00
Yegor Yefremov
4c270eecfa
boards/esp32*: fix ENC28J60 configuration example
...
Add missing '#' to the MODULE_ENC28J80's endif.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-10 15:14:47 +02:00
Sebastian Meiling
29efd8402f
boards: add I2C config for cc2650stk
2019-04-09 18:07:06 +02:00
21e55bbd28
boards/hifive1: fixup custom reset command
2019-04-09 12:46:15 +02:00
44ecf0e7f2
boards/cc2650-launchpad: configure i2c feature
2019-04-08 11:32:11 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Hyungsin
d9c17c2154
boards: add initial hamilton board support
2019-04-03 15:00:35 -07:00
Vincent Dupont
2cb8c4b75c
boards/esp32-olimex-evb: disable periph_can
2019-04-03 11:12:46 +02:00
Vincent Dupont
3db7c65438
boards/nucleo-f413zh: add periph_can as supported
2019-04-03 11:12:46 +02:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
5ce0c8f50d
boards/seeeduino_arch-pro: use FLASHFILE variable
...
Update to use FLASHFILE as file to be flashed on the board.
openocd.inc.mk now uses FLASHFILE variable so does not need to overwrite
FFLAGS anymore.
2019-03-26 19:26:42 +01:00
Martine Lenders
790f763d3d
native: use -g3 instead of -g
2019-03-26 18:53:27 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
7daf5966c2
arduino-zero: add usbdev feature
2019-03-26 10:26:12 +01:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
d7804823db
sam0_common: Add USB peripheral driver
2019-03-26 10:26:11 +01:00
Gunar Schorcht
01d17793eb
boards/cpu/esp32*: doc fix of built-in ROM size
2019-03-25 14:00:59 +01:00
e830462bf2
boards/nrf52840-mdk: fix device type used with pyocd
...
This allows pyOCD to use the right memory values, especially flash size and pyOCD 0.14.1 has support for nrf52840.
2019-03-24 16:48:29 +01:00
1f937cedb7
Merge pull request #11141 from fjmolinas/stm32l0_bootloader
...
stm32l0: add riotboot support
2019-03-24 10:48:48 +01:00
francisco
9624a34e86
boards/b-072z-lrwan1: provide riotboot feature
2019-03-24 10:05:53 +01:00
francisco
235d5ce835
boards/nucleo-l073rz: provide riotboot feature
2019-03-23 20:38:20 +01:00
e7f8e46114
boards/nrf52840-mdk: add missing dependency to 802154 driver
2019-03-23 13:40:18 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
7d360fcd2a
Merge pull request #11200 from danpetry/tools/jlink_handle_image_offset
...
jlink: handle flashing at IMAGE_OFFSET
2019-03-20 19:13:28 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
danpetry
f8bb42f787
Openmote-cc2538: format flash start address as hex
...
Declaring the address in decimal format meant that it was being
interpreted as a decimal rather than hex address by the tooling
and the intermediate bash arithmetic. This fixes that bug.
2019-03-20 16:07:51 +01:00
905376eef8
Merge pull request #11103 from aabadie/pr/boards/nrf52832-mdk-v2
...
boards/nrf52832-mdk: add basic support
2019-03-20 15:48:13 +01:00
a218bc62ab
boards/b-l475e-iot01a: add defines and deps for lps22hb
2019-03-20 14:43:37 +01:00
80b337b756
boards/iotlab: update lps331ap device addr define
...
The default address is the same one
2019-03-20 14:43:36 +01:00
d08a028c20
boards: add support for nrf52832-mdk
2019-03-20 14:41:26 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
Hauke Petersen
8216c9397a
Merge pull request #11096 from haukepetersen/add_board_reel
...
boards: add support for Phytec 'reel board'
2019-03-20 10:47:21 +01:00
Marian Buschsieweke
e7e9084c64
Merge pull request #11185 from cladmi/pr/make/msba2/compile_flasher
...
msba2: compile 'lpc2k_pgm' when flashing
2019-03-20 10:38:46 +01:00
Gaëtan Harter
edaaa78851
boards/cc2650: use the common uniflash configuration
...
The content is exactly the same.
2019-03-15 15:54:34 +01:00
Gaëtan Harter
d2103b21ab
boards/cc2650stk: fix whitespace
...
Make it more similar to cc2650-launchpad
2019-03-15 15:39:42 +01:00
Hauke Petersen
ada1d3ce48
boards: add support for Phytec 'reel board'
2019-03-15 10:46:45 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
Marian Buschsieweke
e4ebbaf59f
boards: Add support for the Arduino Nano
...
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
2019-03-14 13:54:38 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Emmanuel Baccelli
8969fd32e9
Merge pull request #11080 from kaspar030/add_pyboard
...
boards: add pyboard v1.1 support
2019-03-13 17:07:40 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
b1a7d6093b
boards/hifive1: add and use custom openocd reset command
2019-03-12 11:49:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
3fd3eea5bc
boards/native: add two factice motors with qdec simulation
...
Configure 2 factice motors in one motor_driver.
native_motor_driver_qdec_simulation() is provided to simulate QDEC encoders
virtually linked to the motors.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
ffad5048fc
boards/native: update doc.txt
...
Add PWM and QDEC peripheral description.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
d04c21bb8b
boards/native: add qdec simulation callback
...
native_motor_driver_qdec_simulation() callback is called each time
motor_set() from motor_driver driver is called.
It set associated qdec value to the PWM duty cycle.
QDEC values are stored in qdecs_value[] array in the order motors
are described in board.h.
Then it is needed to configure in first motors that needs the QDEC in
board.h.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
37981b5bc2
boards/native: add periph_pwm to FEATURES_PROVIDED
...
Add periph_pwm to FEATURES_PROVIDED as PWM is now implemented into native
cpu.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
1da26d5690
Merge pull request #11105 from aabadie/pr/boards/nrf52840-mdk-openocd-fix
...
boards/nrf52840-mdk: fix openocd programmer configuration
2019-03-06 21:58:34 +01:00
45c4741310
boards/pyboard: initial commit
2019-03-05 22:23:07 +01:00
ee44e58855
Merge pull request #11065 from cladmi/pr/board/nz32/termprog
...
boards/nz32-sc151: do not blindly set TERMFLAGS
2019-03-05 17:07:56 +01:00
840a096ce6
boards/nrf52840-mdk: fix openocd programmer configuration
...
For nrf52 based boards, the default adapter is JLink and nrf52840-mdk
uses dap.
2019-03-05 11:48:16 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
MichelRottleuthner
1642a03125
Merge pull request #11066 from aabadie/pr/boards/common_f4_clock
...
boards/common/stm32: rework common clock configuration for stm32f4
2019-03-04 14:10:47 +01:00
Semjon Kerner
84ebd83a62
boards/nrf52840dk: support ieee802.15.4 radio
2019-03-04 13:21:47 +01:00
Sebastian Meiling
d29d336894
Merge pull request #11039 from maribu/avrdude
...
makefiles/tools: Improved avrdude integration
2019-02-28 22:15:30 +02:00
Marian Buschsieweke
4abc41a227
makefiles/tools: Automatically set avrdude target
...
The CPU variable in the boards Makefile.include file already contains the target
CPU, so there is no reason to provide it in each board again as avrdude flag.
This commit automatically sets the avrdude target from the CPU variable and
removes the unneeded flags.
2019-02-28 20:55:04 +01:00
a5ff1dc32a
boards/stm32f4discovery: use common clock configuration without LSE
...
This fixes the boards being stuck when initializing the RTC
2019-02-27 21:49:56 +01:00
7d31bb43f1
boards/stm32/f4: factorize common clock configuration (168/8)
...
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
2019-02-27 21:49:55 +01:00
Rotzbua
d606c11d11
tests/leds: initialize led0 by default
...
fix unexpected behavior:
reference #9949
reference #10294
fix redefinition for AUTO_INIT_LED0
2019-02-27 13:09:29 +01:00
Peter Kietzmann
ca9c441923
Merge pull request #11070 from cladmi/pr/bug/stm32f3discovery/clock_lse
...
boards/stm32f3discovery: Fix no external low speed crystal
2019-02-26 21:40:39 +01:00
Martine Lenders
07260661bb
Merge pull request #11060 from leandrolanzieri/pr/boards/lobaro-lorabox_remove_auto_init_led0
...
boards/lobaro-lorabox: Remove auto init LED0
2019-02-26 21:35:21 +01:00
Gaëtan Harter
5e58eccd5a
boards/stm32f3discovery: Fix no external low speed crystal
...
The board does not have external low speed crystal.
Page 20 of User Manual: 6.10.2 "OSC 32 kHz clock supply"
* X3 Crystal (not provided)
https://www.st.com/resource/en/user_manual/dm00063382.pdf
This fixes `example/default` and makes `tests/periph_rtc` work properly.
2019-02-26 16:44:46 +01:00
7a5d2ad2fb
boards/nrf52: thingy52 and ruuvitag don't work with openocd
2019-02-26 11:15:36 +01:00
a2cfa52602
boards/nrf52xx: use common flashing documentation
2019-02-26 11:03:06 +01:00
826df5648b
boards/nrf52: update nrf52 common documentation
...
Add common flashing notes + move the doc in a separate doc.txt file
2019-02-26 11:03:06 +01:00
9373225a13
boards/nrf52xx: add flashing and stdio sections in doc
2019-02-26 11:03:06 +01:00
171e8589ff
boards/nrf52840-mdk: use common openocd configuration
2019-02-26 11:03:06 +01:00
3eb17f56fa
boards/nrf52xxxdk: add openocd as programmer
...
For the moment openocd doesn't work when softdevice blob module is loaded
2019-02-26 11:02:57 +01:00
Sebastian Meiling
a5385c15cc
Merge pull request #11027 from maribu/atmega_cleanup
...
boards/common/atmega: Refactoring periph_conf.h
2019-02-25 20:13:41 +02:00
Marian Buschsieweke
7bc9b4b707
boards/common/atmega: Refactoring periph_conf.h
...
- Moved code for periph_conf of all ATmega based boards to boards/common/atmega
- Added possibility to override config from individual board:
- Named file `periph_conf_atmega_common.h` and let this be included from
`board/$BOARD/include/periph_conf.h` to allow modifications
- Guarded individual periph configs by `#ifndef $PERIPH_NUMOF` ... `#endif`
2019-02-25 18:48:09 +01:00
Gaëtan Harter
479d679ddf
boards/nz32-sc151: do not blindly set TERMFLAGS
...
The board should not globally set `TERMFLAGS` without a RIOT_TERMINAL
condition.
Also the board does not export uart through usb and thus needs an uart
converter connected. Other boards in the same situation do not need
to set `TERMPROG` without a valid baudrate. So remove the definition
anyway.
This also removes the export of TERM* variables and should make it work
with the other RIOT_TERMINAL.
2019-02-25 18:00:58 +01:00
Gaëtan Harter
3b119cc5ba
boards/native: unexport TERM* variables
...
TERMPROG and TERMFLAGS variables do not need to be exported as they are
used directly by a make receipe.
2019-02-25 17:26:03 +01:00
Leandro Lanzieri
609db0c2f6
boards/lobaro-lorabox: Remove auto init LED0
2019-02-25 13:43:50 +01:00
Yegor Yefremov
a62d4550d7
Documentation: fix dead links
...
The link to nodemcu-devkit-v1.0 was missing 'h' in 'http'.
Other links were missing 'http://' or 'https://' and were pointing
to non-existing components on RIOT's web site.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-02-12 10:46:15 +01:00
ZetaR60
1f9e1857f7
Merge pull request #9130 from kYc0o/cpu/atmega/unify_stacks
...
atmega: refactor cpu/board code and build/flash variables
2019-02-08 18:07:22 -05:00
Kees Bakker
361ba8d1a0
boards/sodaq-autonomo: switch to flashing with bossac
2019-02-06 19:44:26 +01:00
Francisco Acosta
7139393394
boards: include potential features from CPU for atmega boards
...
Features must be provided by the board if they're actually
available on board. Other features might be provided by the
CPU.
Some grouping is also removed as it is not necessary.
2019-02-05 17:12:04 +01:00
Francisco Acosta
d208cba464
boards: leverage avrdude.inc.mk for atmega based boards.
...
Additionally, it removes unnecessary exports and cleans up
waspmote-pro toolchain variables (not needed) which are taken
from atmega_common.
2019-02-05 17:12:04 +01:00
Francisco Acosta
1a98d64cd5
boards/arduino*: use common avrdude.inc.mk from atmega_common
...
Leverages common flasher (avrdude) and removes unnecessary exports.
Moreover, a reuse of serial.inc.mk is perfomed from the same
atmega_common/Makefile.include
2019-02-05 17:12:03 +01:00
Marian Buschsieweke
fa0d08a08b
boards/msba2: Added ltc4150 to saul_default
2019-01-28 13:45:08 +01:00
6cd81dbc87
Merge pull request #10865 from kaspar030/uncrustify_change_disable_hint
...
uncrustify: change en/disable markers
2019-01-25 22:40:02 +01:00
674128ea27
boards/hifive1: adapt to RIOT uncrustify markers
2019-01-25 17:21:14 +01:00
a12b61e9af
boards/nrf52840-mdk: initial support
2019-01-25 16:29:10 +01:00
