Dylan Laduranty
85d37bb94f
Merge pull request #11336 from benpicco/sam0-timer
...
sam0_common: make Timer implementation common across all sam0 MCUs
2019-05-21 12:13:39 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
5e3d20d0b2
boards: add support for i-nucleo-lrwan1
2019-05-21 09:57:33 +02:00
a4de4153fc
boards/lsn50: use common rtt configuration
2019-05-21 09:01:02 +02:00
ca9bd8e5cc
boards/nucleo-l496zg: use common rtt configuration
2019-05-21 08:38:44 +02:00
f92139509d
boards/nucleo-l476rg: use common rtt configuration
2019-05-21 08:38:44 +02:00
c3d7dbce2c
boards/nucleo-l452re: use common rtt configuration
2019-05-21 08:38:44 +02:00
4c86b00808
boards/nucleo-l433rc: use common rtt configuration
2019-05-21 08:38:43 +02:00
4e26ac943b
boards/b-l475e-iot01a: use common rtt configuration
2019-05-21 08:38:43 +02:00
7d12ea78f0
boards/b-l072z-lrwan1: use common rtt configuration
2019-05-21 08:38:43 +02:00
871dda1216
boards/stm32: introduce common default rtt config
2019-05-21 08:38:43 +02:00
c439346f6d
Merge pull request #10563 from aabadie/pr/boards/particle_mesh
...
boards/particle-{xenon,argon,boron}: add initial support
2019-05-20 11:54:04 +02:00
bf3e471fdb
boards/lsn50: add initial support
2019-05-17 22:43:04 +02:00
05409782c0
boards/particle-boron: initial support
2019-05-17 22:42:08 +02:00
17fd5b7145
boards/particle-argon: initial support
2019-05-17 22:42:08 +02:00
f524a451a4
boards/particle-xenon: initial support
2019-05-17 22:42:08 +02:00
22fe1925e0
boards/particle-mesh: common support for particle mesh boards
2019-05-17 22:42:08 +02:00
Kevin "Bear Puncher" Weiss
e40f483acf
Merge pull request #11261 from gschorcht/cpu/esp32/doc_fix/rom
...
boards/cpu/esp32: doc fix of built-in ROM size
2019-05-14 13:07:50 +02:00
Leandro Lanzieri
44d981947d
Merge pull request #11293 from gschorcht/cpu/esp32/periph/conf/spi
...
boards/esp32: changes the approach for configurations of SPI interfaces in board definitions
2019-05-14 12:07:19 +02:00
Leandro Lanzieri
171058d38d
Merge pull request #11481 from gschorcht/boards/esp32_wrover_kit/doc/fix
...
boards/esp32 wrover kit: documentation fixes and small improvents
2019-05-14 11:23:58 +02:00
Francisco
6b8bbd7eba
Merge pull request #11044 from aabadie/pr/boards/kw41z-common
...
boards/kw41z*: add common configuration and use it with existing kw41z boards
2019-05-14 01:53:31 -07:00
Gunar Schorcht
bf60857442
boards/esp32_wrover_kit: documentation fix
...
Fixes the bold faced references **/dev/ttyUSB** that stopped doxygen generation
2019-05-13 18:12:03 +02:00
Gunar Schorcht
38843792c4
boards/esp32_wrover_kit: documentation fix
...
Fixes a reference to vendor picture that has been moved to a different location.
2019-05-13 18:12:03 +02:00
Gunar Schorcht
0eb8275925
boards/esp32_wrover_kit: documentation improvement
2019-05-13 18:12:03 +02:00
Leandro Lanzieri
ab6d0fe08c
Merge pull request #11292 from gschorcht/cpu/esp32/periph/conf/pwm
...
boards/esp32: changes the approach for configurations of PWM channels in board definitions
2019-05-13 16:11:05 +02:00
Kevin "Bear Puncher" Weiss
6a78746471
Merge pull request #11506 from maribu/bluepill_doc
...
boards/bluepill: Extended/updated doc on flashing
2019-05-10 00:56:50 -07:00
Marian Buschsieweke
531c62fa65
boards/bluepill: Extended/updated doc on flashing
...
- Indicated that the hardware reset signal is used to reset the device and that
OpenOCD will that connect under reset
- Added troubleshooting for flashing using hardware reset
- Removed previous troubleshooting for flashing, as this issue is no longer
present since OpenOCD connects under reset
2019-05-09 19:36:12 +02:00
Kevin "Bear Puncher" Weiss
6afb0603aa
Merge pull request #11291 from gschorcht/cpu/esp32/periph/conf/i2c
...
boards/esp32: changes the approach for configurations of I2C in board definitions
2019-05-09 08:26:01 -07:00
Kevin "Bear Puncher" Weiss
795ad18f2e
Merge pull request #11294 from gschorcht/cpu/esp32/periph/conf/uart
...
boards/esp32: changes the approach for configurations of UART interfaces in board definitions
2019-05-09 08:25:40 -07:00
8bd320b34f
boards/phynode-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
7d90a48a3d
boards/usb-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
151803da5b
boards/frdm-kw41z: use common configuration
2019-05-07 21:57:04 +02:00
cb4cdee0ef
boards/common: introduce common code for kw41z boards
2019-05-07 21:57:04 +02:00
Leandro Lanzieri
9075e1d207
Merge pull request #11290 from gschorcht/cpu/esp32/periph/conf/dac
...
boards/esp32: changes the approach for configurations of DAC channels in board definitions
2019-05-07 11:35:34 +02:00
990086aee7
Merge pull request #11479 from cladmi/pr/kinetis/hwrng
...
kinetis: move filtering-out periph_hwrng in cpu/kinetis
2019-05-06 17:42:16 +02:00
Gaëtan Harter
19224ec1d5
kinetis: move filtering-out periph_hwrng in cpu/kinetis
...
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
2019-05-06 15:12:47 +02:00
Gunar Schorcht
008f1c5d55
boards/esp32: UART configuration approach changed
...
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
2019-05-06 13:34:59 +02:00
Gunar Schorcht
23cc987184
boards/esp32: SPI configuration approach changed
...
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
2019-05-06 13:33:48 +02:00
Gunar Schorcht
bd354dd29f
boards/esp32: PWM configuration approach changed
...
PWM channels are now configured using static array in header files instead of static variables in implementation.
2019-05-06 13:32:52 +02:00
Gunar Schorcht
6a3bc3e242
boards/esp32: I2C configuration approach changed
...
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
2019-05-06 13:32:06 +02:00
Gunar Schorcht
7e8a1c1ea6
boards/esp32: DAC config approach changed
...
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
2019-05-06 13:29:38 +02:00
Gunar Schorcht
880e156602
boards/esp32: disable DAC for WROVER-Kit boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
f872eb9488
boards/esp32: disable DAC for Olimex ESP32 boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
18cb678dd7
boards/esp32_wrover_kit: documentation improvement
...
Adds a reference to a vendor document about hardware configuration.
2019-05-03 07:57:30 +02:00
Gunar Schorcht
3db78e0423
boards/esp32: ADC config approach changed
...
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
2019-05-02 16:39:04 +02:00
Gunar Schorcht
0bab7e08cf
boards/esp32: disable ADC for Olimex ESP32 EVB
2019-05-02 16:38:58 +02:00
Emmanuel Baccelli
4c3e49ee40
Merge pull request #11475 from kaspar030/add_iotpush_copyrights
...
add copyrights from IOTPUSH project
2019-05-02 12:42:17 +02:00
0ec9c57b2b
add copyrights from IOTPUSH project
2019-05-02 12:09:37 +02:00
Leandro Lanzieri
7c14ff4153
Merge pull request #11337 from gschorcht/cpu/esp32/periph/submodules
...
cpu/esp32: fix of periph_* submodule compilation
2019-05-01 23:51:03 +02:00
Gunar Schorcht
a3c314f0cd
boards/esp32*: print config for enabled modules
2019-05-01 09:40:17 +02:00
