MrKevinWeiss
464f57b4a3
boards: Remove PLL overrides in kconfig
...
Since we know the HSE speed, manual overrides are not needed anymore
2022-11-03 13:38:09 +01:00
MrKevinWeiss
17cce015d4
treewide/stm32: Make CLOCK_HS* configurable
2022-11-03 11:37:28 +01:00
Gunar Schorcht
7e166c638f
boards/stm32f746g-disco: enable tinyUSB feature
2022-10-21 11:43:55 +02:00
Gunar Schorcht
958d8c904a
boards/stmf746g-disco: enable ULPI HS PHY support for USB OTG HS port
2022-10-06 06:26:22 +02:00
Gunar Schorcht
b04c84765b
boards/stm32f746g-disco: add LD1 as LED0 definition
...
LED LD1 has no special function on the board STM32F746-DISCO and therefore can be used freely. This LED is also defined as ARDUINO LED pin D13 in the schematic.
2022-09-30 08:47:58 +02:00
Leandro Lanzieri
1716638792
cpu/stm32/periph_eth: model in Kconfig
2022-07-25 11:08:32 +02:00
c9afd2a94e
boards: add support for stm32f7508-dk
2022-04-14 21:43:57 +02:00
fdacb1a118
boards/stm32: adapt I2C configuration where needed
2022-03-23 10:10:08 +01:00
Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
Leandro Lanzieri
91012bc3f9
drivers/ft5x06: remove unnecessary pseudomodules
2022-01-21 14:13:49 +01:00
Leandro Lanzieri
4eb58d74b5
drivers/ft5x06: allow multiple device types
2022-01-21 13:13:09 +01:00
c67920c1cc
boards/stm32f746g-disco: pull-in ft5336 with touch_dev
2022-01-09 16:43:35 +01:00
0080657d63
boards/stm32f746g-disco: configure ft5336 I2C peripheral and int pin
2022-01-09 16:43:34 +01:00
8429172c89
boards/stm32f746g-disco: pull in ltdc feature with disp_dev
2022-01-07 14:32:24 +01:00
dbf2f06968
boards/stm32f746g-disco: enable LTDC peripheral
2022-01-07 14:32:24 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
d0b1b4e1e5
boards/stm32f746g-disco: use connect_assert_srst with openocd
2021-12-27 12:50:21 +01:00
MrKevinWeiss
deda2cfb97
boards: Fix stm32 based boards kconfig models
2021-12-15 09:31:45 +01:00
Leandro Lanzieri
df7ce1c647
makefiles/kconfig: use two lists for boards and CPUs default configs
...
This introduces KCONFIG_BOARD_CONFIG and KCONFIG_CPU_CONFIG variable for
boards and CPUs (including common directories) to add default
configuration files to be merged. The current approach, as it uses
Makefile.features, would include boards first, not allowing them to
override CPU configurations.
2021-12-13 12:33:21 +01:00
b6d1e09448
boards/stm32f746g-disco: extend documentation
2021-12-01 15:55:59 +01:00
1f372ba0e6
boards/stm32f746g-disco: add usbdev feature
2021-11-29 09:35:43 +01:00
9e79afb412
boards: add support for stm32f746g-disco
2021-11-16 10:51:48 +01:00
