Oleg Hahm
67c1084825
sam3: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
Oleg Hahm
875f48979a
avsextrem: some cleanup
2015-12-07 20:28:52 +01:00
Oleg Hahm
20f1750fb6
cpu stm32fX: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
Oleg Hahm
e88ebc1c84
cpu nrf51: fix pedantic compiler warnings
...
Make compiler doesn't complain about unused variables and unnamed unions.
2015-12-07 20:28:52 +01:00
Oleg Hahm
f24e810de5
cpu cortexm_common: fix pedantic compiler warnings
2015-12-07 20:28:52 +01:00
Hauke Petersen
b75e5fe407
cpu/stm32f4: adapted DMA_TypeDef struct for f401
2015-12-07 18:00:41 +01:00
Hauke Petersen
a2247a3400
cpu/stm32f4: significantly optimized UART driver
2015-12-07 18:00:40 +01:00
Hauke Petersen
b13f5cf801
cpu/stm32f4: optimized vendor header slightly
2015-12-07 18:00:40 +01:00
PeterKietzmann
7ff9467970
Revert "stm32l1/i2c.c: adapt for new periph driver interface"
...
This reverts commit e9215a6cc1
.
2015-12-07 17:21:34 +01:00
14a54bddce
cpu: native: netdev2_tap: make use of netdev2_eth module
2015-12-07 11:40:39 +01:00
René Herthel
e9215a6cc1
stm32l1/i2c.c: adapt for new periph driver interface
2015-12-03 19:50:06 +01:00
Marc
96444d632e
cpu/lm4f120: reworking timer
2015-12-02 13:58:23 +01:00
Oleg Hahm
4d27214a8d
Merge pull request #4258 from BytesGalore/cpp11_use_xtimer
...
cpp11: vtimer->xtimer
2015-11-30 19:30:40 +01:00
Peter Kietzmann
329820ddd4
Merge pull request #4119 from latsku/nucleo-f401
...
boards: Add support for Nucleo-f401
2015-11-30 10:52:24 +01:00
Lari Lehtomäki
14be504b6a
boards/nucleo-f401: Add initial support
...
cpu: Add support for STM32F401xE cpu
boards: Add support for Nucleo-f401
boards/nucleo-f401: New line fixes and comment on green led pin
board/nucleo-f401: Added LED GPIO
board/nucleo-f401: Fixed LED GPIO
board/nucleo-f401: Minor fixes
2015-11-30 11:06:34 +02:00
04bc408931
cpu: msp430: add write() + needed libc header fixes
2015-11-28 22:09:37 +01:00
BytesGalore
529e83675e
cpp11: switched to use xtimer
...
Also switched the syscalls of cpu/native to use xtimer, only at _gettimeofday()
2015-11-27 18:36:25 +01:00
28d9eab420
cpu: atmega_common_ add off_t to sys/types.h
2015-11-26 20:41:36 +01:00
René Kijewski
ab3345ac5a
Merge pull request #4321 from kaspar030/cleanup_posix
...
sys: cleanup posix compat code
2015-11-26 20:39:30 +01:00
c4e55a2e6d
cpu: msp430-common: add unistd.h
2015-11-25 14:36:45 +01:00
4769c3075d
cpu: avr_common: add unistd.h
2015-11-25 14:36:45 +01:00
Hauke Petersen
c389f5be02
cpu/cortexm_common: fixes to vectors_cortexm.c
...
- (optimization) only fill ISR stack with canary values if
DEVELHELP macro is set (as we don't use these values otherwise)
- (cosmetic) moved define before variable definitions
2015-11-23 12:13:17 +01:00
Hauke Petersen
3fc71ef694
Merge pull request #4307 from haukepetersen/opt_cortex_isrstack
...
cpu/cortexm_common: moved ISR stack definition
2015-11-20 12:11:19 +01:00
Hauke Petersen
476167a86c
cpu: fixed any doxygen warning realated to 'periph'
2015-11-19 16:08:38 +01:00
Hauke Petersen
cf11b073d6
cpu/cortexm_common: define ISR stacksize in cpu.h
2015-11-19 11:55:35 +01:00
Hauke Petersen
3d35c33cb2
cpu/stm32f1: fixed i2c driver
...
the _stop() function now blocks until the transfer
is complete. Not waiting can lead to concurrent bus
access and subsequent to bus errors.
2015-11-18 14:57:15 +01:00
Hauke Petersen
047f7544a4
Merge pull request #4198 from thomaseichinger/pr/fix_4197
...
stm32f1/i2c: Disable I2C module before initialization
2015-11-17 17:41:33 +01:00
Ludwig Knüpfer
a86866ea9f
cpu/native: malloc.h for osx: fix doxygen, move
2015-11-15 12:14:59 +01:00
Andreas "Paul" Pauli
e5b6566c9a
Merge pull request #4170 from haukepetersen/opt_sam3_uart
...
cpu/sam3: cleaned up UART driver
2015-11-11 16:21:10 +01:00
Cenk Gündoğan
0792450dd7
cpu: kinetis_common: remove vtimer include from spi.c
2015-11-11 09:03:12 +01:00
Joakim Nohlgård
511539bb7a
Merge pull request #4247 from cgundogan/pr/stm32/remove_vtimer_include
...
cpu: stm32f[34]: remove unused vtimer include
2015-11-11 08:57:55 +01:00
Hauke Petersen
86da628971
Merge pull request #4081 from daniel-k/pr/samd21_rtt_fix_irq_priority
...
samd21: don't change priority of interrupts, this is really evil
2015-11-10 13:05:10 +01:00
Cenk Gündoğan
18427a8074
cpu: stm32f4: spi: remove unused vtimer include
2015-11-10 12:27:17 +01:00
Cenk Gündoğan
6e7f83a390
cpu: stm32f3: spi: remove unused vtimer include
2015-11-10 12:26:58 +01:00
Peter Kietzmann
745320dc41
Merge pull request #4232 from DipSwitch/fix_gpio_read
...
gpio: Pin direction readout of gpio_read was invalid
2015-11-09 13:18:13 +01:00
Oleg Hahm
4ef889f9ce
Merge pull request #4226 from DipSwitch/stm32f1_add_spi_12
...
cpu/stm32f1/spi: add SPI peripheral 1 and 2
2015-11-07 18:06:09 +09:00
DipSwitch
4186e38976
stm32f1/gpio: pin direction readout of gpio_read was invalid
2015-11-06 16:57:10 +01:00
Andreas "Paul" Pauli
bf63e09a65
Merge pull request #4137 from haukepetersen/opt_samr21_pwm
...
cpu/samd21: optimized pin config for PWM driver
2015-11-05 16:14:05 +01:00
DipSwitch
2e2ec37846
cpu/stm32f1/spi: add SPI peripheral 1 and 2
2015-11-04 13:40:20 +01:00
René Herthel
13ae0ab979
atmega2560/cpu: Fixed wrong using of UART macros
2015-11-03 18:29:53 +01:00
Hauke Petersen
3ab389b1fd
Merge pull request #4134 from gebart/pr/cortexm-hardfault-naked-fix
...
cpu/cortexm_common: only set naked attribute on DEVELHELP hardfault handler
2015-11-02 18:04:57 +01:00
Thomas Eichinger
96b6d4b1dd
stm32f1/i2c: Disable I2C module before initialization
...
When initializing multiple drivers connected to the same
I2C bus, the bus should be disabled before pin toggeling
and reinitialization.
2015-11-01 11:51:51 +09:00
Ludwig Knüpfer
3b2d26b0dc
cpu/saml21: fix typo in gpio.c
2015-10-31 17:35:41 +01:00
Ludwig Knüpfer
406aea453c
cpu/samd21: fix typo in gpio.c
2015-10-31 17:28:16 +01:00
Joakim Nohlgård
76bddaf213
Merge pull request #3283 from gebart/pr/kinetis-errata-e4218
...
k60: Add workaround for errata e4218
2015-10-30 07:33:31 +01:00
Peter Kietzmann
6fcea29bdc
Merge pull request #4042 from gebart/pr/kinetis-gpio-periph-refactor
...
kinetis_common: Refactor GPIO implementation
2015-10-29 08:29:09 +01:00
Hauke Petersen
7d1c952734
Merge pull request #3571 from haukepetersen/add_board_wstk6220a
...
boards/cpu: added SLWSTK6220A and EZR32WG support
2015-10-28 20:58:43 +01:00
Hauke Petersen
b9707cd8f3
cpu/ezr32wg: added extern C to vendor headers
2015-10-28 17:33:44 +01:00
Joakim Nohlgård
142c28094e
kinetis_common: Refactor GPIO implementation
...
This is a rewrite of the Kinetis GPIO driver which follows the
refactored API in [1]. Pins are specified using the GPIO_PIN(PORT_x, y)
macro, e.g. GPIO_PIN(PORT_E, 25) for the PTE25 pin.
The interrupt pin handling is now implemented as a linked list, this
is more memory efficient, but with a minor variation in interrupt
latency depending on in what order the pins were initialized at
runtime.
Because the linked list entries are taken from a shared pool, there is
also the possibility of running out of available configuration slots,
define the preprocessor macro GPIO_INT_POOL_SIZE in periph_conf.h if
you need more than 16 pins configured for interrupts in the same
application.
[1]: https://github.com/RIOT-OS/RIOT/pull/3095
2015-10-28 14:12:19 +01:00
Martine Lenders
a370a12f75
msp430: fix doc to time.h
2015-10-28 13:59:52 +01:00
Martine Lenders
77b0ffffec
msp430: include missing types to time.h
2015-10-28 13:59:35 +01:00
Hauke Petersen
36646865f0
cpu: added support for SiLabs EZR32WG
2015-10-28 13:50:34 +01:00
Hauke Petersen
e1f028a859
cpu/sam3: reworked the UART driver
2015-10-28 12:05:35 +01:00
Hauke Petersen
85e05d411e
Merge pull request #4114 from haukepetersen/opt_periph_uart
...
drivers/periph/uart: remodeled UART interface
2015-10-28 10:50:03 +01:00
Joakim Nohlgård
3033738e30
Merge pull request #4126 from gebart/pr/cortexm-r7-O0-fix
...
cortexm-common: Workaround for error: r7 cannot be used in asm here
2015-10-28 07:01:32 +01:00
Joakim Nohlgård
c3340b7ccf
cpu/cortexm_common: Use PRIx32 for printing uint32_t in hard fault handler
...
fixes errors like:
error: format specifies type 'unsigned long' but the argument has
type 'uint32_t' (aka 'unsigned int') [-Werror,-Wformat]
2015-10-28 06:59:28 +01:00
Joakim Nohlgård
a5449bcbd4
cpu/cortexm_common: only set naked attribute on DEVELHELP hardfault handler
...
Fixes error on LLVM/Clang:
cpu/cortexm_common/vectors_cortexm.c:287:5: error: non-ASM statement in naked function is not supported
core_panic(PANIC_HARD_FAULT, "HARD FAULT HANDLER");
^
cpu/cortexm_common/include/vectors_cortexm.h:65:46: note: attribute is here
void hard_fault_default(void) __attribute__((naked));
^
1 error generated.
2015-10-28 06:51:51 +01:00
Peter Kietzmann
f5b2c80bd6
Merge pull request #4015 from daniel-k/pr/cortexm_hardfault_overflow
...
cortexm_common: check for possible stack overflow in hardfault handler
2015-10-27 19:19:32 +01:00
daniel-k
c5e220c140
cortexm_common: check for possible stack overflow in hardfault handler
2015-10-27 15:58:36 +01:00
Hauke Petersen
19cd4b32c4
cpu/stm32l1: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
1eb63f20a7
cpu/stm32f4: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
9741267d9d
cpu/stm32f3: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
59b935bd1e
cpu/stm32f1: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
b71d8ea750
cpu/stm32f0: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
65673663b5
cpu/saml21: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
a93f15b5cb
cpu/samd21: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
07a7d93690
cpu/msp430fxyz: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
fe249b9006
cpu/lpc2387: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
68670f038f
cpu/lpc1768: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
d31401ef1a
cpu/lpc11u34: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
14796f2351
cpu/lm4f120: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
c7d256d83e
cpu/kinetis_common: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
a58d577cb1
cpu/cc2538: adapted UART driver
2015-10-27 14:59:38 +01:00
Hauke Petersen
1125f5feb3
cpu/atmega2560: adapted UART driver
2015-10-27 14:59:37 +01:00
Hauke Petersen
8044e457cb
cpu/atmega2560: adapted UART driver
2015-10-27 14:59:37 +01:00
Hauke Petersen
4c3a397f34
cpu/sam3: adapted UART driver
2015-10-27 14:59:37 +01:00
Hauke Petersen
d32c03932e
cpu/nrf51: adapted UART driver
2015-10-27 14:59:37 +01:00
Hauke Petersen
97af043227
cpu/stm32f4: adapted UART driver
2015-10-27 14:59:37 +01:00
Peter Kietzmann
59e2fd8a22
Merge pull request #4148 from LudwigKnuepfer/pr/nrf51-adc
...
cpu/nrf51 + boards: add ADC implementation
2015-10-27 14:49:32 +01:00
Peter Kietzmann
816bef6220
Merge pull request #4094 from danielamkaer/atmega2560_gpio_init_fix
...
cpu/atmega2560: fixes the configuration of pullup resistors in gpio.c
2015-10-26 08:45:34 +01:00
Peter Kietzmann
e539db10ee
Merge pull request #4104 from gebart/pr/drop-timer-reset
...
periph/timer: Drop timer_reset
2015-10-26 08:36:01 +01:00
Peter Kietzmann
9f6cd49559
Merge pull request #4047 from danielamkaer/bugfix_atmega2560_gpio
...
cpu/atmega2560: gpio - fixes a bug where gpio_* behaves incorrect if …
2015-10-26 08:17:36 +01:00
Joakim Gebart
c404bd97ad
k60: Add workaround for errata e4218
...
e4218: SIM/FLEXBUS: SIM_SCGC7[FLEXBUS] bit should be cleared when the
FlexBus is not being used.
Errata type: Errata
Description:
The SIM_SCGC7[FLEXBUS] bit is set by default. This means that the
FlexBus will be enabled and come up in global chip select mode. With
some code sequence and register value combinations the core could
attempt to prefetch from the FlexBus even though it might not actually
use the value it prefetched. In the case where the FlexBus is
unconfigured, this can result in a hung bus cycle on the FlexBus.
Workaround:
- If the FlexBus is not being used, disabled the clock to the FlexBus
during chip initialization by clearing the SIM_SCGC7[FLEXBUS] bit.
- If the FlexBus will be used, then enable at least one chip select as
early in the chip initialization process as possible.
2015-10-25 15:12:22 +01:00
Ludwig Knüpfer
73d21efe7d
cpu/nrf51: add ADC driver
2015-10-25 14:30:14 +01:00
Ludwig Knüpfer
0b5918003f
cpu/nrf51 + boards: fix typo - TIEMER -> TIMER
2015-10-25 08:07:21 +01:00
Johann Fischer
f31db0431f
Merge pull request #4132 from jfischer-phytec-iot/pr@kinetis-ldscript
...
kinetis_common: use cortexm_common ldscript
2015-10-24 09:59:38 +02:00
Johann Fischer
e95afc80fb
kinetis_common: use cortexm_common ldscript
...
kinetis.ld includes cortexm_common ldscript, the fields for the
isr vectors and fcfield remain in kinetis.ld.
2015-10-23 12:01:22 +02:00
Johann Fischer
f0e7d2fc03
cpu/kinetis_common/timer.c: cleanup and fix the pit timer
...
It simplifies the virtual "count up timer" and improves
the accuracy a little. The LDVAL for the prescaler should
be set as a number of prescaler cycles-1. The virtual
up-counter should be corrected in the isr by +1
(See PIT reference manual). This also fixes a bug where
the timer is not used by xtimer and up-counter does not overflow.
2015-10-23 11:58:10 +02:00
Hauke Petersen
13fcefb638
s cpu: moved pwm_conf_[chan_]t to periph_cpu.h
2015-10-23 11:41:04 +02:00
Hauke Petersen
fe6b3e7d54
cpu/samd21: optimized pin config for PWM driver
2015-10-23 11:41:04 +02:00
Daniel Amkær Sørensen
6040531ae1
cpu/atmega2560: fixes the configuration of pullup resistors in gpio.c
2015-10-22 07:05:33 +02:00
Joakim Nohlgård
30584a49e5
cortexm-common: Workaround for error: r7 cannot be used in asm here
...
Fixes https://github.com/RIOT-OS/RIOT/issues/4125
2015-10-21 14:35:02 +02:00
Hauke Petersen
05ef9fee99
cpu/kinetis_common: removed i2c_init_slave()
2015-10-20 16:58:06 +02:00
Hauke Petersen
82c843a000
cpu: removed init_slave from I2C drivers
2015-10-20 16:57:39 +02:00
Joakim Nohlgård
cbaeccdb90
periph/timer: Drop timer_reset
2015-10-17 20:11:03 +02:00
Thomas Eichinger
79a3b05b42
Merge pull request #4092 from ks156/spi
...
cpu/lpc11u34 : Added SPI for NXP LPC11U34 (SPI_0 and SPI_1)
2015-10-16 17:48:23 +02:00
Paul Rathgeb
df68ac9f79
cpu/lpc11u34 : Added SPI for NXP LPC11U34 (SPI_0 and SPI_1)
...
make: Blacklisted 'weio' in driver_at86rf2xx and driver_kw2xrf due to insufficient memory
2015-10-16 17:28:09 +02:00
daniel-k
1f98e06956
samd21/gpio: check if interrupt is enabled in isr, fixes #4087
...
The interrupt flag for a previously configured external gpio interrupt
will be set regardless of the actual configuration. So when another source
causes an interrupt, the callback of a disabled gpio interrupt will be serviced
although it was disabled if the interrupt occured in the meantime.
2015-10-15 17:05:40 +02:00
Thomas Eichinger
02e2d8c353
Merge pull request #4084 from ks156/adc
...
cpu/lpc11u34 : Added ADC support for LPC11U34
2015-10-14 10:22:09 +02:00
Paul Rathgeb
c2d8d27322
cpu/lpc11u34 : Added ADC support for LPC11U34
2015-10-13 21:45:17 +02:00
Thomas Eichinger
2b29abed8e
Merge pull request #4071 from thomaseichinger/hauke-fix-gpio-gpiodev
...
drivers/gpio: renamed GPIO(x,y) macro to GPIO_PIN
2015-10-13 16:05:19 +02:00
Hauke Petersen
d43dc9182f
cpu: s/GPIO(x,y)/GPIO_PIN(x,y)/
2015-10-13 14:59:54 +02:00
8c08c9f731
Merge pull request #4049 from thomaseichinger/pr/mega_gpio_oob
...
cpu/atmega2560: fix out of bounds array access
2015-10-13 13:00:07 +02:00
Thomas Eichinger
c0782d68e8
Merge pull request #4070 from thomaseichinger/hauke_fix_l1_uartpins
...
cpu/stm32l1: cleaned up UART pin configuration slightly
2015-10-13 11:37:12 +02:00
daniel-k
70c8f355c5
samd21: don't change priority of interrupts, this is really evil
2015-10-12 19:53:43 +02:00
Hauke Petersen
cdcdd185af
boards/nucleo-l1: adapted UART configuration
2015-10-10 13:24:28 +02:00
Paul Rathgeb
8b97ef12d5
cpu/lpc11u34 : Add CPUID support and added this capability to board/weio
2015-10-10 09:23:45 +02:00
Hauke Petersen
2e84fbf85e
cpu/stm32l1: optimized pin init in UART driver
2015-10-09 11:15:34 +02:00
Thomas Eichinger
89c0f42b00
Merge pull request #4029 from ks156/pwm
...
cpu/lpc11u34 : Peripheral addition : PWM
2015-10-08 17:00:52 +02:00
Cenk Gündoğan
05fe4a33d8
Merge pull request #3870 from cgundogan/pr/cpu/cortexm0plus
...
cpu/Makefile.include.cortexm_common: don't use cortex-m0plus for clang if unsupported
2015-10-08 16:50:39 +02:00
Paul Rathgeb
01e5c056d9
cpu/lpc11u34 : Added PWM support for the NXP LPC11U34
...
and added PWM capabilities to the board WeIO
2015-10-08 15:37:38 +02:00
Thomas Eichinger
11895d4f07
cpu/atmega2560: fix out of bounds array access
2015-10-05 13:55:16 +02:00
Daniel Amkær Sørensen
e500301f1c
cpu/atmega2560: gpio - fixes a bug where gpio_* behaves incorrect if PORTn address > 0xFF
2015-10-05 12:43:35 +02:00
Ludwig Knüpfer
dd3229aa62
native: dynamically load malloc
...
g++ 5.2.0 apparently requires malloc before startup is run.
2015-10-04 18:13:12 +02:00
Paul Rathgeb
53b6df3751
cpu/lpc11u34: Fixed typo
2015-10-02 14:56:52 +02:00
Paul Rathgeb
100bd51a64
cpu/lpc11u34 : Added a new CPU definition for NXP LPC11U34
...
This CPU is used in the WeIO (www.we-io.net)
board.
Peripheral included :
- timer
- uart
- gpio
2015-10-01 20:11:00 +02:00
5b0dc7641f
Merge pull request #4004 from sgso/used_attribute_for_lto
...
cpu/cortexm_common: add used attributes for LTO
2015-10-01 11:18:46 +02:00
Peter Kietzmann
4e05254eb7
Merge pull request #3893 from haukepetersen/opt_f1_baudcalc
...
cpu/stm32f1: optimized baudrate calculation
2015-09-30 17:20:08 +02:00
Sebastian Sontberg
bc1e6c815e
cpu/cortexm_common: add used attributes for LTO
2015-09-30 15:56:38 +02:00
Peter Kietzmann
be8f63769c
Merge pull request #3879 from sgso/fix_spi_slave_return_codes
...
cpu: let spi_init_slave() stubs return error codes
2015-09-30 14:07:54 +02:00
Daniel Krebs
85f5a86f7e
Merge pull request #3887 from daniel-k/pr/samd21_clocks
...
samd21: tidy up peripheral clocks and fix potential bugs
2015-09-30 10:42:10 +02:00
Thomas Eichinger
053d2498fc
Merge pull request #3193 from locicontrols/cc2538-uart-fixes
...
cpu/cc2538: misc UART driver fixes
2015-09-30 00:30:31 +02:00
Peter Kietzmann
076cbb6c15
Merge pull request #3897 from haukepetersen/opt_l1_baudcalc
...
cpu/stm32l1: optimized baudrate calculation
2015-09-29 23:41:27 +02:00
Peter Kietzmann
c797117be1
Merge pull request #3896 from haukepetersen/opt_f4_baudcalc
...
cpu/stm32f4: optimized baudrate calculation
2015-09-29 23:30:35 +02:00
Peter Kietzmann
6dd73a0e70
Merge pull request #3895 from haukepetersen/opt_f3_baudcalc
...
cpu/stm32f3: optimized baudrate calculation
2015-09-29 22:24:23 +02:00
Peter Kietzmann
15b5e09d9f
Merge pull request #3894 from haukepetersen/opt_f0_baudcalc
...
cpu/stm32f0: optimized baudrate calculation
2015-09-29 21:01:37 +02:00
Peter Kietzmann
d081adeda9
Merge pull request #3751 from daniel-k/pr/samd21_i2c
...
samd21/i2c: add feedback in case transfer failed
2015-09-29 20:14:43 +02:00
daniel-k
0b6da4609e
samd21: tidy up peripheral clocks and fix potential bugs in pwm and i2c clocks
2015-09-29 18:49:46 +02:00
Ian Martin
40b93ea6ad
cpu/cc2538: uart init overhaul
2015-09-29 12:26:13 -04:00
Ian Martin
aca53006b0
cpu/cc2538: preserve UART_CTL flags when clearing an error condition
2015-09-29 12:26:13 -04:00
Ian Martin
b2c51bed6a
cpu/cc2538: eliminate unused macros UART_1_CTS_PORT and UART_1_RTS_PORT
2015-09-29 12:26:13 -04:00
Ian Martin
d70705f840
cpu/cc2538: round when computing the UART baudrate divisor
2015-09-29 12:26:13 -04:00
effb15a2cc
Merge pull request #3313 from gebart/pr/eINT-fixes
...
eINT/dINT fixes
2015-09-29 12:39:16 +02:00
Daniel Krebs
1c585688bc
Merge pull request #3700 from gebart/pr/cortexm-state-rebased
...
cortexm: Attempt to reconstruct state for debugging hard faults
2015-09-29 11:26:28 +02:00
Oleg Hahm
4cfb8140e4
Merge pull request #3978 from LudwigOrtmann/pr/namechange
...
documentation: update my name (Ortmann -> Knüpfer)
2015-09-28 10:38:41 +02:00
Ludwig Knüpfer
eda6328e21
documentation: update my name (Ortmann -> Knüpfer)
2015-09-27 18:58:30 +02:00
Oleg Hahm
f035bced0c
doc: put network devices and sensors in subgroups
2015-09-27 18:25:43 +02:00
d9414fdab4
cpu: msp430fxyz: switch back to uart_stdio
2015-09-25 11:09:19 +02:00
Hauke Petersen
f7057da00d
Merge pull request #3909 from gebart/pr/k60-delete-old-devio
...
cpu/k60: remove leftover files from old syscall implementation
2015-09-24 16:29:07 +02:00
Joakim Nohlgård
015098d2c2
kinetis: timer: return error if timer channel is not zero.
2015-09-24 06:46:34 +02:00
Hauke Petersen
ff84390627
Merge pull request #3939 from haukepetersen/fix_native_periph_timer
...
native/timer: fix return value for invalid channel
2015-09-23 22:54:05 +02:00
d0ff4946ea
cpu: lpc2387: add spi_conf_pins()
2015-09-23 19:00:55 +02:00
Hauke Petersen
1664bcbf59
native/timer: fix return value for invalid channel
2015-09-23 14:48:23 +02:00
Joakim Gebart
56c6d629f7
cpu/cortexm_common: Improve hardfault debug information
...
Print more relevant information and attempt to reconstruct the state for GDB before halting.
2015-09-23 13:50:06 +02:00
Cenk Gündoğan
32ff8e30e1
cpu/Makefile.include.cortexm_common: don't use cortex-m0plus for clang if unsupported
2015-09-22 21:19:59 +02:00
Hauke Petersen
1f02e7c86a
Merge pull request #3856 from haukepetersen/opt_l1_timer
...
cpu/stm32l1: optimized and fixed timer driver
2015-09-22 14:45:00 +02:00
Hauke Petersen
d7cf9b3912
cpu/stm32l1: optimized and fixed timer driver
2015-09-22 12:30:41 +02:00
483b59554a
cpu: msp430fxyz: fix usart ISR
2015-09-22 10:43:27 +02:00
c122571801
cpu: msp430-common: fix context save/restore
...
Previously, __restore_context was meddling with the to-be-restored
context SR on the stack, not correctly restoring GIE.
Now, we let the CPU restore the correct status register as saved in
__save_context.
Contains some simplification of the context save/restore logic.
2015-09-22 10:43:27 +02:00
Joakim Gebart
96528ea266
cpu/k60: remove leftover files from old syscall implementation
2015-09-21 08:45:07 +02:00