This gets rid of a long list of boards with network interfaces and
instead let's boards (or MCUs with peripheral network interfaces)
provide the netif feature.
The apps that before used the long list are not depending on the
feature instead (in case of the default example, this is an
optional dependency).
Co-authored-by: mguetschow <mikolai.guetschow@tu-dresden.de>
Co-authored-by: mewen.berthelot <mewen.berthelot@orange.com>
When in an invalid state, the board could not flash anymore.
Like for example after flashing `tests/driver_adt7310` this makes it
flash again.
I used `reset_config srst_only` as the other kinetis boards are also
configured that way.
Do not set 'OPENOCD_EXTRA_INIT' but rely on
'openocd/openocd-adapters/dap.inc.mk' to select the adapter.
Using 'OPENOCD_EXTRA_INIT' for this was deprecated.
When 'DEBUG_ADAPTER_ID' was set it was already the case but not with
'SERIAL'.
The compatibility with using 'SERIAL' is maintained.
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
With the canned recipe for flashing, flash dependencies should be
added to FLASHDEPS, instead of writing `flash: dependencies`. This
ensures that both flash and flash-only depend on the same prerequisites.
This allows a board configuration to select which kind of averaging
should be applied to the pin instead of always using 32 sample average.
Very high impedance sources may need to disable hardware averaging in
order to give correct values, the on-chip temperature sensor is one such
signal source.
MCPU is already defined to `CPU_ARCH` which is `cortex-m4`.
Removing this line does not change the value:
make --no-print-directory -C examples/hello-world/ BOARD=pba-d-01-kw2x \
info-debug-variable-CPU_ARCH info-debug-variable-MCPU
cortex-m4
cortex-m4
