Gunar Schorcht
941d6be666
boards: make DFU_USB_ID and DFU_USE_DFUSE overridable
2022-11-30 19:28:14 +01:00
Gunar Schorcht
1d9e2cc4f6
sys/riotboot: use BTN0_MODE for default value of BTN_BOOTLOADER_INVERTED
2022-11-30 19:28:14 +01:00
Gunar Schorcht
09e94b3e15
sys/usb/usbus/dfu: check min sector size for STM32 F2/F4/F7
...
STM32F2/4/7 MCUs use sectors instead of pages, where the minimum sector size is defined by FLASHPAGE_MIN_SECTOR_SIZE, which is 16KB or 32KB (the first sector) depending on the CPU_MODEL. In this case SLOT0_OFFSET must be a multiple of the minimum sector size to cover a whole sector.
2022-11-30 19:28:14 +01:00
Gunar Schorcht
421cbc5c29
bootloaders/riotboot_dfu: improve documentation of usage
...
The `dfu-util` command uses `--device $(DFU_USB_ID)`, where `DFU_USB_ID` is derived from `USB_VID` and `USB_PID` to specify the DFU device to use. Without specifying `USB_VID` and `USB_PID` in the make command, `dfu-util` is called with `--device :`, which only works if there is only one DFU device. Also, the STM32 make system forbids the use of `dfu-util` as programmer without setting the variable `DFU_USB_ID`. Therefore, the documentation is changed to use `USB_VID`/`USB_PID` or `DFU_USB_ID` in the make command.
2022-11-30 19:28:14 +01:00
Dylan Laduranty
4af5175b9d
Merge pull request #18992 from gschorcht/pkg/tinyusb_fix_reset
...
pkg/tinyusb: fix the reset of the USB connection for STM32 boards without internal D+ pullup
2022-11-30 18:42:52 +01:00
Gunar Schorcht
fc1600252f
pkg/tinyusb: fix reset for STM32 boards without internal D+ pullup
...
If the STM32 MCU does not have an internal D+ pullup and there is no dedicated GPIO on the board to simulate a USB disconnect, the D+ GPIO
has to be temporarily configured as an output and pushed down to simulate a disconnect/connect cycle to allow the host to recognize the device. This is done correctly in `cpu/stm32/periph/usbdev_fs.c` but not in tinyUSB STM32 hardware driver. That is, pressing the RESET button doesn't reset the USB connection.
fixup! pkg/tinyusb: fix reset for STM32 boards without internal D+ pullup
2022-11-30 15:17:51 +01:00
benpicco
7d8601e3cd
Merge pull request #18997 from OlegHahm/pr/add_32bit_requirement_to_paho
...
pkg: paho-mqtt: added missing requirement
2022-11-30 14:49:12 +01:00
Oleg Hahm
6f7710a2e9
pkg: paho-mqtt: added missing requirement
...
Paho won't compile on platforms where an Integer is smaller than 32 bit.
2022-11-30 11:42:40 +01:00
benpicco
e18bc193fc
Merge pull request #18551 from benpicco/suit_worker_cleanup
...
suit: start worker thread on demand, make suit_handle_url() public
2022-11-30 11:42:25 +01:00
0d30defd5c
Merge pull request #18996 from kaspar030/fast_build_unittests_fix
...
CI: can_fast_ci_build.py unittests fix
2022-11-30 10:14:00 +01:00
34cfdac78a
ci/can_fast_ci_run.py: add workaround for #18987
2022-11-30 09:37:34 +01:00
benpicco
32f05417b0
Merge pull request #18994 from kfessel/p-update-wamr-pkg-111
...
pkg/wamr: Update to WAMR-1.1.1
2022-11-29 19:56:47 +01:00
Kevin "Tristate Tom" Weiss
16b616218c
Merge pull request #18734 from Teufelchen1/tests/uri_parser
...
unittests/uri_parser: Rework tests to be more verbose
2022-11-29 19:43:34 +01:00
Teufelchen1
49efb727da
unittests/uri_parser: Rework tests to be more verbose
2022-11-29 16:47:07 +01:00
Karl Fessel
16b45766d3
pkg/wamr: Update to WAMR-1.1.1
2022-11-29 13:28:46 +01:00
Jose Alamos
2965419028
drivers/at86rf2xx: move addr logic to netdev
2022-11-29 11:16:16 +01:00
Jose Alamos
ba6c0d845e
drivers/at86rf2xx: remove unused getters
2022-11-29 11:16:16 +01:00
Jose Alamos
06cc410aa9
drivers/at86rf2xx_netdev: cleanup is_periph logic
2022-11-29 11:16:15 +01:00
benpicco
388f9a2015
Merge pull request #18887 from kfessel/p-clean-header-kerneldef
...
sys/include: remove kernel_defines.h where not needed
2022-11-29 10:14:52 +01:00
Marian Buschsieweke
045bb7c39c
Merge pull request #18989 from maribu/cpu/qn908x
...
cpu/qn908x: use bitarithm_test_and_clear() & fix cb
2022-11-28 18:36:29 +01:00
Marian Buschsieweke
317b12af34
Merge pull request #18986 from maribu/boards/qn9080dk
...
boards/qn9080dk: add default OPENOCD_DEBUG_ADAPTER
2022-11-28 17:42:30 +01:00
Marian Buschsieweke
0d85356180
cpu/qn908x: use bitarithm_test_and_clear() & fix cb
...
Previously, the callback was incorrectly passed a channel of zero as
argument regardless of the channel that triggered the IRQ. This fixes
the issue and also uses `bitarithm_test_and_clear()` to only iterate
over the channels that actually have an IRQ flag set, rather than
all channels.
2022-11-28 16:43:24 +01:00
Marian Buschsieweke
c95028655d
cpu/qn909x/periph_timer: make clangd happy
...
The linter was unhappy that `unsinged long` and `uint32_t` were used
inconsistency (in the `timer_init()` declaration, implementation, as
well as in the `DEBUG()` format specifiers).
2022-11-28 16:43:24 +01:00
Marian Buschsieweke
e6dfe75ccb
Merge pull request #18984 from krzysztof-cabaj/doc-vbat-divider
...
boards/nucleo-l* and g*: update doc concerning Vbat
2022-11-28 14:59:01 +01:00
Marian Buschsieweke
e94fdf129f
boards/qn9080dk: add default OPENOCD_DEBUG_ADAPTER
...
The board has integrated debugger:
1fc9:0090 NXP Semiconductors LPC-LINK2 CMSIS-DAP V5.173
This commit changes the default debug adapter to this one.
2022-11-28 13:38:59 +01:00
krzysztof-cabaj
d7c56670d3
boards/nucleo-g071rb: improve ADC doc
2022-11-28 05:07:25 -05:00
krzysztof-cabaj
2d4ab71a3e
boards/nucleo-g070rb: improve ADC doc
2022-11-28 05:07:25 -05:00
krzysztof-cabaj
66357132e4
boards/nucleo-l476rg: improve ADC doc
2022-11-26 17:30:47 -05:00
krzysztof-cabaj
fce4d350cd
boards/nucleo-l496zg: move vbat divider info to main section
2022-11-26 17:30:47 -05:00
krzysztof-cabaj
633743240d
boards/nucleo-l4r5zi: add doxygen info about Vbat divider
2022-11-26 17:30:47 -05:00
Marian Buschsieweke
476dca2e8f
Merge pull request #18978 from maribu/cpu/atmega_common/periph_timer/spurious_irqs
...
cpu/atmega_common/periph_timer: fix spurious IRQs
2022-11-26 16:29:18 +01:00
benpicco
51b2073f10
Merge pull request #18979 from lincynu/nimble-link-up
...
pkg/nimble: signal LINK_UP on initialisation
2022-11-26 09:36:03 +01:00
benpicco
a3e841e4bd
Merge pull request #18967 from jia200x/pr/at86rf2xx_define_caps
...
drivers/at86rf2xx: define caps in macros
2022-11-26 01:47:13 +01:00
benpicco
1a73fb0593
Merge pull request #18795 from benpicco/irq-track
...
debug_irq_disable: add module to debug time spent in irq_disable
2022-11-25 19:10:10 +01:00
Захваткина Виктория Федоровна
96595fa16e
pkg/nimble: signal LINK_UP on initialisation
2022-11-25 20:52:45 +03:00
Marian Buschsieweke
787884aa95
cpu/atmega_common/periph_timer: fix spurious IRQs
2022-11-25 14:46:16 +01:00
Jose Alamos
5a865c3a6b
drivers/at86rf2xx: add HAVE_RETRIES_REG macro
2022-11-25 14:01:44 +01:00
Jose Alamos
22c6d0242a
drivers/at86rf2xx: add HAVE_ED_REGISTER macro
2022-11-25 14:01:44 +01:00
Jose Alamos
82d3324e63
drivers/at86rf2xx: add HAVE_SUBGHZ macro
2022-11-25 14:01:44 +01:00
Jose Alamos
58ce0743c6
drivers/at86rf2xx: add TX_START macro
2022-11-25 14:01:43 +01:00
Jose Alamos
b6b8dc1958
drivers/at86rf2xx: add AT86RF2XX_IS_PERIPH macro
2022-11-25 14:01:39 +01:00
Marian Buschsieweke
496abf0a4e
tests/periph_timer: also test for spurious IRQs
...
Previously the test only checked if IRQs fired when expected. This
extends the test to also check that IRQs do not fire when not expected.
2022-11-25 12:33:54 +01:00
Marian Buschsieweke
e7ee53e6ed
tests/periph_timer: fix style and use of volatile
...
To synchronize communication via shared memory between ISR context and
thread context it is a common misconception that `volatile` is
sufficient. This is however is not the cause and the cause of many
subtle data race bugs. This fixes the issue.
2022-11-25 12:33:54 +01:00
f1a8e1f636
Merge pull request #18970 from maribu/cpu/nrf5x_common/periph_timer/fix_spurious_irqs
...
cpu/nrf5x_common/periph_timer: fix spurious IRQs
2022-11-25 08:23:34 +01:00
Marian Buschsieweke
c89c75dbc9
Merge pull request #18971 from maribu/cpu/esp
...
cpu/esp{32,8266}/periph_timer: allow changing callback or freq
2022-11-25 08:22:26 +01:00
Marian Buschsieweke
cf93e9e0e3
Merge pull request #18969 from maribu/cpu/stm32/periph_timer/fix_spurious_irqs
...
cpu/stm32/periph_timer: fix spurious IRQs and race conditions
2022-11-25 08:11:37 +01:00
Marian Buschsieweke
03b7fe8f0c
cpu/esp8266/periph_timer: allow changing callback or freq
...
Allow multiple calls to timer_init(), as this is the only way to
change the timer frequency or the callback function.
2022-11-24 22:39:49 +01:00
Marian Buschsieweke
e8fd65566a
cpu/esp32/periph_timer: allow changing callback or freq
...
Allow multiple calls to timer_init(), as this is the only way to
change the timer frequency or the callback function.
2022-11-24 22:38:15 +01:00
Marian Buschsieweke
fbd7b77331
cpu/nrf5x_common/periph_timer: fix spurious IRQs
2022-11-24 22:36:42 +01:00
Marian Buschsieweke
20fc71dd65
cpu/stm32/periph_timer: fix spurious IRQs
2022-11-24 22:34:10 +01:00
