Marian Buschsieweke
d2a3ff3d83
boards/{bluepill*,blackpill*}: rename and improve doc
...
- renamed:
- `bluepill` --> `bluepill-stm32f103c8`
- `bluepill-128kib` --> `bluepill-stm32f103cb`
- `blackpill` --> `blackpill-stm32f103c8`
- `blackpill-128kib` --> `blackpill-stm32f103cb`
- doc:
- added link to corresponding hardware page on the STM32-base
project
- added picture
2023-01-02 16:23:10 +01:00
d5e184b326
examples: tests: update Makefile.ci with stm32f7508-dk
...
This commit also makes some cleanup in the files since add_insufficient_memory_board.sh was used for the update
2022-04-15 12:51:58 +02:00
Dave VanKampen
55ea8cfb97
boards/stm32g031-disco,examples,tests: Added STM32G031-DISCO board
2021-10-13 12:14:45 -04:00
benpicco
025770968b
Merge pull request #16036 from bergzand/pr/gd32vf103/initial
...
gd32v/seeedstudio-gd32: Initial support
2021-08-25 00:38:00 +02:00
f8bb757bae
seeedstudio-gd32: Initial include of board
...
The seeedstudio-gd32 is an small development board based on the
gd32vf103 MCU
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
2021-08-24 14:30:23 +02:00
Benjamin Valentin
a53e8e3138
unittests: rtt_rtc: add test for rtc_get/settimeofday()
2021-07-28 00:35:47 +02:00
Francisco Molina
1fa6374530
boards/lora-e5-dev: initial support
2021-07-21 11:28:16 +02:00
Akshai M
bd8f571895
unittests: Add WL to insufficient mem list
2021-04-20 21:04:36 +02:00
Gerson Fernando Budke
4a9f0efb6d
boards: introduce atmega328p-xplained-mini
...
Add ATmega328P Xplained Mini board. The board is an official
development kit from MCHP based on the Arduino UNO, reduced
hardware, with a xplainedmini debugger and CDC ACM serial
converter.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
2021-03-27 14:10:19 -03:00
benpicco
a69da13d56
Merge pull request #15948 from jeandudey/2021_02_08-cc1350-launchpad
...
boards: add cc1350 launchpad
2021-02-09 23:34:58 +01:00
Jean Pierre Dudey
2bca4d3ac3
boards: add cc1350-launchpad
...
Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
2021-02-09 23:04:24 +01:00
Benjamin Valentin
ae4d7ee116
Makefile.ci: add zigduino
2021-02-09 15:26:03 +01:00
Benjamin Valentin
d3ca85ad65
tests: add bluepill-stm32f030c8 to Makefile.ci
2021-02-02 23:47:40 +01:00
Benjamin Valentin
33fec8b9dc
boards/samd20-xpro: add support for SAM D20 Xplained Pro
2021-01-21 20:29:15 +01:00
Bas Stottelaar
74e1ac29ac
tests: add to BOARD_INSUFFICIENT_MEMORY
2021-01-06 23:44:54 +01:00
Benjamin Valentin
0c36a57e4e
tests: add samd10-xmini to Makefile.ci
2020-12-11 18:33:31 +01:00
benpicco
418aaa6e67
Merge pull request #15388 from benpicco/boards/e104-bt5010a-tb
...
boards/e104-bt5011a-tb: add support for the E104-BT5011A Test Board
2020-12-02 00:24:33 +01:00
Benjamin Valentin
c27ea1afa1
examples, tests: add e104-bt5011a-tb to Makefile.ci
2020-12-01 18:28:41 +01:00
b0b19203a7
Merge pull request #15190 from benpicco/boards/wefun-f401cc
...
boards/common/weact-f4x1cx: create common WeAct boards
2020-12-01 12:03:38 +01:00
benpicco
333fce44b4
Merge pull request #14973 from benpicco/driver/at86rf215-batmon
...
drivers/at86rf215: implement battery monitor, add power bus
2020-12-01 11:52:46 +01:00
Benjamin Valentin
851e2c5a9a
boards/weact-f401cc: add WeAct-f401cc
2020-12-01 11:02:09 +01:00
73d36eac38
tests/unittests: exclude arduino-nano-33-iot
2020-11-27 08:45:07 +01:00
Bas Stottelaar
ff26819f7f
tests: add to unsupported boards
2020-11-23 00:36:20 +01:00
Benjamin Valentin
f9c36f9738
netopt: add NETOPT_BATMON
...
Many radios have a built-in battery monitor.
Add a netopt to configure it.
2020-11-13 22:59:09 +01:00
Gilles DOFFE
631e882844
tests: examples: remove stm32mp157c-dk2 for mem leak
...
stm32mp157c-dk2 has not enough memory to build this apps.
However as the stm32mp157xx cpu line has no flash, a part of RAM
is considered as ROM. Thus ROM size could be extend to suit this
apps needs.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
Martine Lenders
37dd848c37
Merge pull request #15337 from cgundogan/pr/uri_parser_interfaces
...
uri_parser: extend for parsing interfaces in IPv6 addresses
2020-11-12 11:16:52 +01:00
Cenk Gündoğan
d18ad54184
unittests: Makefile.ci: do not link cc1312/52-launchpad
2020-11-12 10:09:17 +01:00
Bas Stottelaar
b6befac515
tests/unittests: add to BOARD_INSUFFICIENT_MEMORY
2020-11-10 22:59:46 +01:00
Bas Stottelaar
fdd467167d
tests/unittests: remove board from BOARD_INSUFFICIENT_MEMORY
2020-10-26 19:42:09 +01:00
Joakim Nohlgård
f006938936
frdm-kl43z: NXP Kinetis FRDM-KL43Z development board
...
https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/kinetis-cortex-m-mcus/l-seriesultra-low-powerm0-plus/freedom-development-platform-for-kinetis-kl43-kl33-kl27-kl17-and-kl13-mcus:FRDM-KL43Z
2020-10-25 00:38:22 +02:00
05fbeb65b1
tests: skip nucleo-l011k4 where it doesn't fit
2020-10-15 18:52:51 +02:00
Benjamin Valentin
69a7eb5efa
tests: add stk3200 to Makefile.ci
2020-10-06 16:43:47 +02:00
f92b0fdb40
tests: exclude nucleo-g431rb where it doesn't fit
2020-09-29 12:27:07 +02:00
3949271953
tests: exclude nucleo-g071rb where necessary
2020-09-25 15:20:15 +02:00
Francisco
578b8b8885
Merge pull request #14372 from benpicco/cpu/nrf52-full
...
cpu/nrf52: add support for the whole family, fix nrf52811
2020-08-27 13:51:12 +02:00
Benjamin Valentin
d5690ee4cd
boards/e104-bt5010a-tb: add support for the E104-BT5010A Test Board
...
This adds support for the nRF52810 based E104-BT5010A break-out board.
2020-08-25 22:51:10 +02:00
Antonio Galea
80cc4b3204
boards/yarm: skip tests requiring too much RAM
2020-08-22 16:36:28 +02:00
f08f582f1a
tests, examples: remove chronos references
2020-08-05 14:32:58 +02:00
ed3ff6ed34
tests: exclude nucleo-f070rb where it doesn't fit in memory
2020-07-21 12:45:25 +02:00
67843a2b11
examples: test: remove remaining occurences of wsn430
2020-07-10 16:49:08 +02:00
Kees Bakker
c062b7f33d
tests/unittests: add sodaq-sara-sff to BOARD_INSUFFICIENT_MEMORY
2020-06-15 21:58:17 +02:00
84941a2548
tests/unittests: exclude nucleo-l412kb
2020-03-20 18:48:31 +01:00
francisco
55b11b7925
boards/im880b: add insufficient memory to tests
2020-03-13 14:36:51 +01:00
benpicco
d4e05edac0
Merge pull request #13524 from benpicco/openlabs-kw41z-mini-256kib
...
boards: add openlabs-kw41z-mini-256kib
2020-03-11 15:42:25 +01:00
Benjamin Valentin
9573b2bba0
boards: add openlabs-kw41z-mini-256kib
...
Add the 256k version of the openlabs-kw41z-mini.
They are identical to the openlabs-kw41z-mini except that it uses
the mkw41z256vht4 instead of the mkw41z512vht4.
2020-03-11 13:50:37 +01:00
Corentin 'Kmikaz' Vigourt
54cafc5125
boards/olimexino-stm32: add support for olimexino-stm32 board
2020-03-11 10:59:57 +01:00
Jean Pierre Dudey
de50518146
cc26x2_cc13x2: use correct RAM value
...
Previous value was 20 K, now it's 80 K. The older family of these MCUs
(cc13x0, cc26x0) had that size, currently for cc13x2 and cc26x2 it's
80 K.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-02-10 18:38:15 -05:00
Jean Pierre Dudey
633aa8cd41
boards: add cc1312-launchpad board.
...
This is mostly based on the cc1352-launchpad boards, is essentially the same
buttons and leds pins, what changes is the CCXML files used to flash with
`make flash` and the UART pins.
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-01-19 11:36:31 -05:00
chudov
0a151a78da
boards/derfmega*: initial support
2019-11-27 20:53:14 +01:00
602f9d7f9c
tests: exclude atmega256rfr2-xpro where required
2019-11-05 10:40:59 +01:00
