603186f913
make: namespace openocd DEBUG_ADAPTER variable
2021-02-23 21:22:52 +01:00
Leandro Lanzieri
c516832211
boards/pba-d-01-kw2x: not define LPTMR_ISR_1
2021-01-12 15:31:34 +01:00
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
4c290e1f92
boards: remove include of serial.inc.mk
2020-12-02 09:20:57 +01:00
c6ad85a7b0
boards: don't include programmer logic at board level
2020-11-25 22:31:13 +01:00
Leandro Lanzieri
af68736798
boards/pba-d-01-kw2x: Add Kconfig symbols
2020-07-02 14:41:43 +02:00
Benjamin Valentin
dc58ef59ae
boards: remove duplicate gnrc_netdev_default from Makefile.dep
...
`gnrc_netdev_default` will pull in `netdev_default`, so no need to
check for both in `Makefile.dep`
2020-05-05 09:58:45 +02:00
1aab4daf8f
boards*: fix position of openocd variable definitions
2020-04-07 11:38:53 +02:00
f3dd7e0e2a
boards*: don't export PRE_FLASH_CHECK_SCRIPT
2020-03-26 09:37:27 +01:00
91d883df47
boards*: don't export OPENOCD_PRE_VERIFY_CMDS
2020-03-26 09:31:21 +01:00
Gunar Schorcht
1fc18ab94f
boards/pba-d-01-kw2x: fix broken links
2020-03-24 10:38:40 +01:00
f1ba22534a
boards: don't export globally OPENOCD_RESET_USE...
2020-03-03 11:42:19 +01:00
Michel Rottleuthner
9ec1a6fab5
boards/pba-d-01-kw2x: add config for tmp006 addr
2020-02-25 20:25:26 +01:00
Sebastian Meiling
85c01f2ebd
boards: update supported features of pba-d-01-kw2x
2020-02-18 11:42:05 +01:00
Sebastian Meiling
867090c579
boards: update links in doc of pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Sebastian Meiling
a9cb3b637f
boards: add pinout ref for pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Francisco
abdebaa86f
Merge pull request #11549 from cladmi/pr/pba_d_01_kw2x/fix_flashing
...
boards/pba-d-01-kw2x: fix flashing from invalid state
2019-09-23 13:09:02 +02:00
Gaëtan Harter
94dfc4dd94
boards/pba-d-01-kw2x: fix flashing from invalid state
...
When in an invalid state, the board could not flash anymore.
Like for example after flashing `tests/driver_adt7310` this makes it
flash again.
I used `reset_config srst_only` as the other kinetis boards are also
configured that way.
2019-09-02 15:56:14 +02:00
Gaëtan Harter
19290fe8b7
boards/pba-d-01-kw2x: rely on the common adapter selection code
...
Do not set 'OPENOCD_EXTRA_INIT' but rely on
'openocd/openocd-adapters/dap.inc.mk' to select the adapter.
Using 'OPENOCD_EXTRA_INIT' for this was deprecated.
When 'DEBUG_ADAPTER_ID' was set it was already the case but not with
'SERIAL'.
The compatibility with using 'SERIAL' is maintained.
2019-09-02 14:48:01 +02:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
francisco
9f43d632ba
boards/pba-d-01-kw2x: add riotboot support
2019-06-06 11:59:55 +02:00
414c304f2b
boards/*: remove useless export when setting DEBUG_ADAPTER
2019-06-03 10:32:08 +02:00
Gaëtan Harter
e40d569204
kinetis: save 'wdog-disable.bin' binary in the repository
...
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
2019-05-28 14:37:11 +02:00
francisco
963bbe75ba
kinetis/check-fcfield: merge hex and elf script
2019-05-27 17:38:46 +02:00
Juan Carrano
c6b8cbea00
kinetis-based-boards: use FLASHDEPS instead of flash: xxxx.
...
With the canned recipe for flashing, flash dependencies should be
added to FLASHDEPS, instead of writing `flash: dependencies`. This
ensures that both flash and flash-only depend on the same prerequisites.
2018-12-06 15:36:53 +01:00
Joakim Nohlgård
dd2fad6b9b
kinetis: ADC: Add hardware averaging configuration
...
This allows a board configuration to select which kind of averaging
should be applied to the pin instead of always using 32 sample average.
Very high impedance sources may need to disable hardware averaging in
order to give correct values, the on-chip temperature sensor is one such
signal source.
2018-09-12 16:32:48 +02:00
cladmi
99a0664bf7
pba-d-01-kw2x: remove duplicate MCPU
...
MCPU is already defined to `CPU_ARCH` which is `cortex-m4`.
Removing this line does not change the value:
make --no-print-directory -C examples/hello-world/ BOARD=pba-d-01-kw2x \
info-debug-variable-CPU_ARCH info-debug-variable-MCPU
cortex-m4
cortex-m4
2018-09-11 15:38:27 +02:00
Peter Kietzmann
064485519f
Merge pull request #9406 from beduino-project/phywave-openocd-upstream
...
boards/pba-d-01-kw2x: use OpenOCD-supplied config
2018-08-17 11:23:53 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
Jose Alamos
7b28fbf110
boards: fix Doxygen group directives
2018-08-01 15:24:55 +02:00
Jose Alamos
a1e17ab5af
doc: add wiki documentation to Doxygen files
2018-08-01 15:24:54 +02:00
Joakim Nohlgård
238b4dda2f
pba-d-01-kw2x: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
2728a56ed8
pba-d-01-kw2x: Update I2C configuration
2018-07-25 12:01:39 +02:00
Tristan Bruns
fbddb7e8a0
boards/pba-d-01-kw2x: use OpenOCD-supplied config
2018-06-25 11:07:19 +02:00
6bc494b928
boards: fix doxygen grouping
2018-06-11 19:12:02 +02:00
Francisco Acosta
9a0f3469b7
Merge pull request #8930 from gebart/pr/kinetis-rtt-refactor
...
kinetis: Refactor RTT driver
2018-05-30 14:54:15 +02:00
Joakim Nohlgård
a6c30ab61d
kinetis: Move RTT config to periph_cpu.h
2018-05-22 16:46:39 +02:00
cb991cd47d
boards: use RIOTTOOLS variable
2018-05-15 11:23:44 +02:00
70802fc652
boards*: cleanup doxygen
...
- replace brief with name where required
- remove some unwanted empty lines
- fix missing closing doxygen name block
2018-04-18 12:08:56 +02:00
Joakim Nohlgård
c54f6b4fcf
kinetis: Refactor clock generator initialization
2018-04-17 06:59:22 +02:00
Gaëtan Harter
fff5810191
Makefile.include: FIX .DEFAULT_GOAL not being all
...
.DEFAULT_GOAL was reset many times which removed 'all' from being the default
goal.
By chance it was then set to `link` so was working by some magic.
2018-03-28 16:59:00 +02:00
c4769f1cc4
boards/pba-d-01-kw2x: fix driver params usage
2018-03-01 10:02:39 +01:00
Joakim Nohlgård
b61eeb9fe0
kinetis: Allow per-board config of ADC ref
...
ADC reference can be external pin or internal VREF module on most
Kinetis CPUs.
2018-02-14 15:16:41 +01:00
b78c96ffc7
boards/*: make brief description consistent
2018-01-24 08:30:56 +01:00
Joakim Nohlgård
f4e9cad85a
boards: Separate boards from debug adapter configuration
2017-11-17 10:03:05 +01:00
smlng
5e7f0af450
boards, pba-d-01-kw2x: fix saul gpio init
2017-11-16 22:08:28 +01:00
Joakim Nohlgård
925a908d95
kinetis: Update RNGA driver configuration to automatically detect the module
2017-11-10 10:43:00 +01:00
Joakim Nohlgård
22c52bd3a8
kinetis: Unify all Kinetis CPUs in one directory
2017-11-10 10:42:59 +01:00
