benpicco
16ab89bf28
Merge pull request #12728 from bergzand/pr/at86rf2xx/fix_recv_before_send
...
at86rf2xx: fix receive before send detection
2020-02-07 13:54:52 +01:00
42d54600f7
at86rf2xx: fix receive before send detection
...
The at86rf2xx radio handled a transfer complete condition with the radio
in the BUSY_TX_ARET state as a finished transmission. This condition and
state also occurs when a reception occurs just before switching to
transmitting. This would cause a condition where first a TX_COMPLETE was
signalled and second a RX_COMPLETE was signalled. The network stack
would then read the transmitted frame as a received frame.
The patch fixes the errornous RX callback by only submitting the
TX_COMPLETE condition when there are at least 2 frames pending
(at86rf2xx::pending_tx).
2020-02-07 13:08:33 +01:00
Vincent Dupont
f11fac8811
mtd_spi_nor: remove sleep when waiting for write completed
2020-02-05 16:20:01 +01:00
Evgeniy Krysanov
7b64d35af5
drivers/ds18: fix ds18 temperature conversion
2020-02-05 12:31:43 +03:00
8e85c2d900
Merge pull request #13261 from aabadie/pr/drivers/ili9341_const
...
drivers/ili9341: use const qualifier where possible
2020-02-04 11:29:03 +01:00
66a06bfdfa
drivers/Makefile.include: document order requirement
2020-02-03 13:52:08 +01:00
0a21575722
drivers: fix alphabetical order in Makefile.include
2020-02-03 10:30:04 +01:00
e126599928
drivers/ili9341: use const qualifier where possible
2020-02-02 18:55:46 +01:00
Martine Lenders
8d749dc024
Merge pull request #13148 from chrysn-pull-requests/usb-default-vidpid
...
USB: Use default VID/PID for RIOT-included peripherals
2020-01-30 17:37:52 +01:00
chrysn
e65f3f372b
USB VID/PID: Set whitelist define for internals that use usb.h
...
This list is probably incomplete as it was created experimentally.
2020-01-30 15:04:10 +01:00
Sebastian Meiling
a4c4c25b3b
Merge pull request #12866 from jia200x/pr/gnrc_lorawan_remove_netdev
...
net/gnrc_lorawan: remove netdev layer from MAC
2020-01-30 14:02:59 +01:00
benpicco
3c13df60ab
Merge pull request #13190 from maribu/cc110x-promiscuous-mode
...
drivers/cc110x: add support promiscuous mode
2020-01-24 14:22:08 +01:00
Francisco
618919bb17
Merge pull request #13192 from leandrolanzieri/pr/drivers/xbee_fix_ref_to_device
...
drivers/xbee: Fix reference to device from netif in send function
2020-01-24 08:46:40 +01:00
Marian Buschsieweke
b98b51d082
drivers/cc110x: Add promiscuous mode support
2020-01-23 18:27:04 +01:00
Marian Buschsieweke
fdc87ae30d
drivers/cc110x: Fixed typo in doc
2020-01-23 18:27:04 +01:00
Marian Buschsieweke
f7eb9233da
drivers/cc110x: Replaced some magic numbers
2020-01-23 18:27:03 +01:00
Leandro Lanzieri
40794cf5f1
drivers/xbee: Fix reference to device from netif in send function
2020-01-23 18:11:17 +01:00
benpicco
88f9d5870d
Merge pull request #13029 from jue89/feature/dose-optional-set-addr
...
drivers/dose: add setter for MAC address
2020-01-23 12:57:05 +01:00
Jose Alamos
709c1aac30
Kconfig: Expose NRF802154 configurations
2020-01-21 11:29:00 +01:00
Leandro Lanzieri
56240bf071
Merge pull request #13147 from jia200x/pr/kconfig_drivers
...
Kconfig: add Drivers menu
2020-01-17 11:43:08 +01:00
Jose Alamos
cbca04fdcc
Kconfig: add Drivers menu
2020-01-16 18:47:57 +01:00
cab8729e32
drivers/ili9341: add number of lines parameter
2020-01-15 15:36:21 +01:00
cfbab79398
Merge pull request #13105 from bergzand/pr/ili9341_add_config
...
ili9341: Add color mode and inversion parameters
2020-01-13 21:07:25 +01:00
Francisco
3e0043021b
Merge pull request #13110 from kaspar030/periph_rtt_docimp
...
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 17:12:08 +01:00
146137ef72
ili9341: Add color mode and inversion parameters
2020-01-13 17:09:02 +01:00
Leandro Lanzieri
434309a9e2
Merge pull request #13106 from MrKevinWeiss/pr/fix/mpudoc
...
drivers/mpu9x50: Fix prameter placement for docs
2020-01-13 15:51:00 +01:00
4df2827fe1
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 15:18:16 +01:00
Francisco
1977423e9b
Merge pull request #13048 from maribu/adc-int32_t
...
periph/adc: Change return type of `adc_sample()` to `int32_t`
2020-01-13 12:56:09 +01:00
MrKevinWeiss
e19091541f
drivers/mpu9x50: Fix prameter placement for docs
...
When generating the doxygen output the temp sens and offset are in the config group.
Since they are internal parameters not to be accessed by users they are placed in the mpu9x650_internal.h file.
2020-01-13 12:50:13 +01:00
MichelRottleuthner
53cb3b087c
Merge pull request #9530 from Hyungsin/forupstream_xtimer
...
sys: xtimer concurrency/robustness improvement
2020-01-13 08:24:15 +01:00
746278a118
drivers/itg320x: set xtimer as dependency
2020-01-11 18:10:09 +01:00
a933657020
drivers/itg320x: remove not needed MODULE variable
2020-01-11 18:09:13 +01:00
benpicco
1c148ba2f2
Merge pull request #10092 from gschorcht/drivers_itg320x
...
drivers: add driver for InvenSense ITG-320X 3-axis gyroscope
2020-01-11 17:37:48 +01:00
Schorcht
71772cc3b3
drivers: add driver for ITG320X 3-axis gyroscope
2020-01-11 08:02:34 +01:00
Hyungsin
6eed5b9d43
remove XTIMER_OVERHEAD
2020-01-10 13:22:11 -08:00
Marian Buschsieweke
6e39b4d191
drivers/periph: adc_sample() now returns int32_t
...
Reasoning: This allow support for ADCs with resolution of more than 16 bits on
8 bit and 16 bit platforms.
2020-01-10 14:13:06 +01:00
69b522e114
Merge pull request #13060 from MichelRottleuthner/pr_periph_timer_irq_safe
...
drivers/periph_common/timer: protect timer_set from IRQs
2020-01-10 11:27:59 +01:00
Michel Rottleuthner
8e7a1edd11
drivers/periph_common/timer: protect timer_set from IRQs
2020-01-10 09:58:18 +01:00
Marian Buschsieweke
e03615fd38
drivers/dht: Worked around doxygen bug
...
Markdown in @retval values is currently broken in Doxygen. This removes use
of markdown there
2020-01-09 17:08:05 +01:00
Jue
2482eec07c
drivers/dose: add setter for MAC address
2020-01-05 23:01:24 +01:00
benpicco
87f86c4c08
Merge pull request #12924 from daexel/shtc1_bugfix
...
drivers/shtc1: Initial support for the SHTC1 temperature and humidity sensor
2019-12-16 18:21:48 +01:00
steffen
fa05cf0c5d
Driver/shtc1: add saul integration
...
- add saul integration
- uncrustified
- SAUL/DRIVER tests
2019-12-16 15:29:04 +01:00
Jue
bc46c7478f
drivers: add Differentially Operated Serial Ethernet driver
2019-12-16 10:43:13 +01:00
Benjamin Valentin
22c2dbbbe5
drivers/sht3x: use crc8 function from common code
...
This makes the sht3x driver use the crc-8 routine from sys/hashes.
It's the same code, was just moved to a common place.
2019-12-13 14:50:32 +01:00
a9bf69146b
Merge pull request #9948 from bergzand/pr/ili9341
...
ili9341: Initial import of ili9341 LCD driver
2019-12-11 16:43:46 +01:00
35737a24e4
drivers/ili9341: add spi mode configuration option
2019-12-11 16:18:40 +01:00
ef4dcb8eec
ili9341: Initial include
...
This commit adds support for the ili9341 display
2019-12-11 16:18:37 +01:00
2f65bacc7d
drivers: fix sort Makefile.dep/include files
2019-12-11 15:31:58 +01:00
Marian Buschsieweke
e3d185b53a
drivers/ws281x: Fixed issue in doc
2019-12-05 13:30:30 +01:00
cae369bc52
saul: Ignore extra dimensions in read functions
2019-12-03 15:17:25 +01:00
Jose Alamos
99dbcecc3a
net/gnrc_lorawan: remove netdev SAP interface
2019-12-03 14:08:35 +01:00
Yegor Yefremov
87d8f29af2
drivers/ws281x: improve documentation
...
Replace 'to' with 'too' and remove the space between '8 MHz'.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-11-29 11:24:29 +01:00
benpicco
f4876013cd
Merge pull request #12789 from maribu/bmx280_endianess
...
drivers/bmx280: Fix incorrect endian conversion
2019-11-28 14:04:41 +01:00
Jannes
0acf55af53
drivers/ncv7356: Add documentation
2019-11-27 13:35:57 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan
...
gnrc_lorawan: add support for GNRC based LoRaWAN stack
2019-11-27 09:25:20 +01:00
Jose Alamos
523d1af490
netdev: add netdev types for GNRC_LORAWAN
2019-11-26 21:52:05 +01:00
benpicco
ffe208a3a4
Merge pull request #11394 from maribu/saul_stringification
...
drivers/saul: Improved stringification
2019-11-26 13:53:59 +01:00
benpicco
af0c6e9319
Merge pull request #12772 from daexel/bme280_bugfix
...
drivers/bmx280: add temp_measurement to methods
2019-11-25 18:26:50 +01:00
benpicco
a21fe4ae87
Merge pull request #12259 from daexel/dcf77
...
drivers/dcf77:Inital Support DCF77
2019-11-25 16:20:51 +01:00
Michel Gerlach
973d9fd54b
driver/bme280: add dependencies on temperature for pressure and humidity
2019-11-25 13:13:24 +01:00
d0d6e53ff4
Merge pull request #11960 from fjmolinas/pr_msp430_flashpage_raw
...
cpu/msp430_common: add flashpage_raw
2019-11-25 12:48:48 +01:00
Marian Buschsieweke
3264106a2f
Merge pull request #12704 from benpicco/AT86RFR2_smart_idle
...
drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2
2019-11-25 11:57:44 +01:00
Marian Buschsieweke
837e9c1ddc
drivers/saul: Improved stringification
...
- Changed declaration of SAUL classes (while keeping the format)
- Termed "class of SAUL classes" category of SAUL classes in the doc to
avoid confusion. (E.g. a SAUL class will now be in category sensor or
actuator.)
- Separate enums for SAUL category and intra-category ID. Numbers will now
but auto-assigned by the compiler
- Use constant look-up tables for stringification (one table per SAUL category).
==> This saves 512B in .data section of AVR
2019-11-25 10:09:11 +01:00
benpicco
ce1f383f90
Merge pull request #12606 from maribu/at86rf2xx-addr-endianess
...
drivers/at86rf2xx: Updated address API
2019-11-24 16:33:16 +01:00
fjmolinas
f0bbcef987
drivers/mtd_flashpage: add 16bit compatibility
2019-11-24 13:19:19 +01:00
41e29e3fda
Merge pull request #12790 from maribu/atmega_isr_thread
...
cpu/atmega_common
2019-11-24 11:10:10 +01:00
c87748f563
periph: fix periph/gpio_util.h header guards
2019-11-23 22:39:40 +01:00
eeca0e3752
drivers/include: fix typos
2019-11-23 22:39:40 +01:00
54b8e01ba3
drivers/opt3001: fix typos
2019-11-23 22:39:39 +01:00
c2f4d0bb7a
drivers/feetech: fix typos
2019-11-23 22:39:39 +01:00
6d79a068b0
drivers/encx24j600: fix typos
2019-11-23 22:39:39 +01:00
7704eabfa6
drivers/dynamixel: fix typos
2019-11-23 22:39:39 +01:00
54831bbb6e
drivers/bh1750fvi: fix typos
2019-11-23 22:39:39 +01:00
a62797e8ba
drivers/adcxx1c: fix typos
2019-11-23 22:39:39 +01:00
5ebe48ce42
drivers/sht3x: fix typos
2019-11-23 22:39:39 +01:00
1d2dd2efdd
drivers/sdcard_spi: fix typos
2019-11-23 22:39:39 +01:00
a25313e5b7
drivers/ph_oem: fix typos
2019-11-23 22:39:39 +01:00
04516d78c5
drivers/pcd8544: fix typos
2019-11-23 22:39:39 +01:00
a90a192648
drivers/pca9685: fix typos
2019-11-23 22:39:39 +01:00
541596c893
drivers/nrf24l01p: fix typos
2019-11-23 22:39:39 +01:00
2e94fc9253
drivers/mrf24j40: fix typos
2019-11-23 22:39:39 +01:00
17e0405a07
drivers/lsm6dsl: fix typos
2019-11-23 22:39:39 +01:00
12223c4e6e
drivers/lpsxxx: fix typos
2019-11-23 22:39:39 +01:00
f81e5c552a
drivers/enc28j60: fix typos
2019-11-23 22:39:39 +01:00
6f6ca90270
drivers/ccs811: fix typos
2019-11-23 22:39:39 +01:00
da4d5be21f
drivers/bmx055: fix typos
2019-11-23 22:39:39 +01:00
5c4bf445bb
drivers/apa102: fix typos
2019-11-23 22:39:39 +01:00
ec47a7542a
drivers/ads101x: fix typos
2019-11-23 22:39:39 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Marian Buschsieweke
f0317c50f2
drivers/at86rf2xx: Updated address API
...
Changed the address getter and setter functions to avoid byte order
confusion.
2019-11-23 19:40:09 +01:00
Marian Buschsieweke
4347f720f5
drivers/at86rf2xx: Update to new ATmega API
...
Replace __enter_isr() with atmega_enter_isr() and __exit_isr() with
atmega_exit_isr()
2019-11-23 12:27:13 +01:00
Marian Buschsieweke
16ee7aed32
Merge pull request #11350 from maribu/ina2xx
...
drivers/ina220: Changed to comply with RIOT's driver design goals & SAUL adaption
2019-11-22 23:36:50 +01:00
benpicco
09f647eee2
Merge pull request #12693 from maribu/neopixel-atmega
...
drivers: Added WS281x RGB LED driver for ATmega platform
2019-11-22 22:36:36 +01:00
Marian Buschsieweke
f08df428fa
drivers/bmx280: Fix incorrect endian conversion
...
The binary shift operators in C are defined via the change of their values, not
the change of the memory representation of them. When reading a value from
little endian out of buffer `buf`, `((uint16_t)buf[1] << 8) | buf[0]` will
thus work regardless of the byte order of the host system.
2019-11-22 20:58:31 +01:00
Marian Buschsieweke
0a0c1697d7
drivers/ina2xx: Added SAUL integration
2019-11-22 20:29:53 +01:00
Marian Buschsieweke
3ebbec84c7
drivers/saul: Fixed documentation
...
There is no need to distinguish between sensors for electrical power or other
types of power.
2019-11-22 20:29:53 +01:00
Marian Buschsieweke
a6476bd813
drivers/ina2xx: Match RIOT's driver design goals
...
- Use standard RIOT style `ina2xx_params_t` on initialization as explained in
[1] instead of a custom API
- Provided a default configuration via `ina2xx_params_t` as required by [1] that
works fine for the INA219 breakout board and with an optimal resolution that
still covers the whole range of USB high-power devices (500 mA @ 5V) with a
comfortable safe margin.
- Changed initialization procedure to include a device reset and connectivity
test, as required by [1]
- The calibration value is now calculated by the driver
- This simplifies using the driver a lot
- The user can still choose a trade-off between range and resolution that
matches the application requirements, but now among predefined values
- This allows the driver to easily convert the raw data into meaningful
physical data, as the resolution of the raw data is known
- All measurements are provided as meaningful physical data as required by [1]
[1]: https://github.com/RIOT-OS/RIOT/wiki/Guide:-Writing-a-device-driver-in-RIOT
2019-11-22 20:28:57 +01:00
Marian Buschsieweke
f424421f79
drivers: Renamed ina220 --> ina2xx
...
The INA219 has the exact same interface as the INA220 (including values and
semantics of the configuration register). Thus, this driver can be used for
both. The ina220 has been renamed to ina2xx to reflect this and pseudo modules
for the ina220 and ina219 have been added.
2019-11-22 19:53:51 +01:00
Hauke Petersen
9f5f6f4215
drivers/bmx280: improved documentation
2019-11-22 14:04:38 +01:00
Hauke Petersen
b7f33bd84f
drivers/bmx280: significant driver rework
...
bugs fixed:
- move global variables into device descriptor
- guard bus access (use acquire and release)
added functionality:
- enable SPI mode
structural improvements:
- reduce stack usage
- simplify the driver's structure
- centralize bus access code
- use assertions
- cleanup includes
- use shortcuts for bus access
style changes:
- fix line length
- cleanup and improve doxygen
- unify pointer notation (char *var over char* var)
- unify (error) return messages
- use `#ifdef MODULE_BME280` instead of `#if defined(BME..)`
- unify debug messages -> using `[bmx28] x: msg` scheme
2019-11-22 14:04:37 +01:00
