The same tool 'gen_esp32part.py' is used for the generation of partition tables on ESP8266 as well as n ESP32. The tool is therefore added to 'dist/tools/esptool'
To control the log level and the format of the log output of SDK libraries, a bunch of library-specific printf functions are realized which map the log output from SDK libraries to RIOT's log macros.
Some ESP8266/ESP8285 modules only work with DOUT SPI flash mode and a SPI flash frequency of 26 MHz. Therefore, these parameters have to be used by default. Otherwise some modules will no boot.
Startup information, including board configuration, is only printed when module esp_log_startup is used. This reduces the amount of information that is printed by default to the console during the startup. The user can enable module esp_log_startup to get the additional startup information.
To avoid that murdock times out before tests/pkg_spiffs and tests/pkg_littlefs time out, the configured test timeouts for these tests is reduced to 200 seconds which should be enough. An ESP32 needs an average of 60 seconds for these tests, while an ESP8266 needs in average 100 seconds.
The modified version esptool.py from RTOS SDK that is required for flashing an image, is now placed in `dist/tools/esptool.py` and used directly from there. The advantage is that `esptool.py` hasn't to be installed explicitly anymore. Having RIOT is enough. The documentation is adapted accordingly. The oly prerequisite is that python and the pyserial module are installed.
In vendor startup code, initialization function were called as parameters of assert statement. With DEVELHELP, they are not called since the assert macro does nothing.
To make the migration progress to the new RTOS SDK easier, the new toolchain was renamed to xtensa-esp8266-elf. This makes it possible to have the new and the old toolchain installed in parallel.
If the WiFi module is used, a number of high priority tasks is created. To void priority collisions with netdev drivers, the number of priorities SCHED_PRIO_LEVELS has to be increased to 32. But in other cases, the default number should be used, also to keep automatic tests working.
This reverts commit 422644bd3a.
The option is only supported after 2.6 which is currently not the
version given with 'esp' toolchain.
It was a bit too early to switch to the new version.
Version 2.7 also supports the old option with only a warning.
Using flash size in megabits is deprecated by esptool.
Use the new megabyte notation.
WARNING: Flash size arguments in megabits like '8m' are deprecated.
Please use the equivalent size '1MB'.
Megabit arguments may be removed in a future release.
esptool.py v2.6
UART FIFO must contain only 1 byte when newlib's `printf` function is used. Otherwise, outputs that are still not sent over UART are lost when `printf` is called asynchronousely.
To avoid unresolved symbols for unused functions during linking, compiler option `-ffunction-sections` is used now. Linker option `--warn-unresolved-symbols` is removed to get errors if required symbols cannot be resolved.
The modules `newlib, `newlib_syscalls_default` and `stdio_uart` are now used by default for output to the UART interface. This also reduces the dependency rules.
The overridden stdio functions `puts`, `putchar` and `printf` were removed. Instead, the corresponding newlib functions are always used. Using the newlib functions fixes output conflicts when using `f *` functions like `fprintf`,` fputs`, ... with `stdout` as the file parameter.
Use the -gz option to compress ELF sections containing DWARF information.
This saves around 50% of disk space, without any side effects.
See https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/Debugging-Options.html#Debugging-Options
for more infomation on this option.
Some platforms have an outdated toolchain that does not support -gz so
the flag is blacklisted there. Even then, the results are quite impressive.
I used @cladmi's `buildtest` branch (https://github.com/cladmi/RIOT/tree/wip/du/buildtest)
with this change and compiled the `examples/default` application:
```
$ BUILD_IN_DOCKER=1 DOCKER="sudo docker" make -C examples/default buildtest-indocker
```
The size was obtained with:
```
$ find output -name "*.bin.bindirsize" -type f -exec tail -n1 '{}' \; | cut -f 1 | awk '{s+=$1} END {printf "%.0f", s}'
```
Results:
- Vanilla: 10328112 KB (~10GB).
- with -gz: 4982788 KB (~5GB).
This was inspired by #8496.
In the `pwm_set` function, the switch-on and switch-off times for PWM channels were only determined for the following phase, but not for the current phase. This could result in a missing duty cycle when calling the function `pwm_set` if the switch-on time of the current phase was not yet reached or to an extended duty cycle if the switch-off time of the current phase had not yet been reached.
Rational: the periph_common module is required by (most) other periph drivers
and also during startup of the CPU/MCU to run periph_init. The latter is only
required if other periph drivers are used, hence periph_common should be a
depency of periph_* modules and *not* of the CPU/MCU. This PR fixes that
by making periph_common a depency of periph_* and removing the explicit
include in the CPU/MCU implementation.
PREFLASHER/PREFFLAGS/FLASHDEPS are evaluated by the main Makefile.include.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `16 insertions(+), 16 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE` plus the newline that is said to have
changed.
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
`top_of_stack` isn't aligned down to the previous 16 byte aligned address. Furthermore, `top_of_stack` as well as `XT_CP_SIZE` are used unaligned in `cpu/esp_common/vendor/xtensa/portasm.S` in the address computation for the coprocessor save area, .
Aligning pointer `p` down to the previous 16 byte aligned address results in a wrong address of the coprocessor save area during the initialization of the thread context. This leads to wrong values and wrong positions of these values in the coprocessor save area in inital thread context.
Since ESP8266 doesn't have a coprocessor, this bug affects only ESP32.
Calling the initialization function ensures that the dummy lwIP library is used instead of the real lwIP, even if the esp_wifi module for esp8266 is not used.
The documentation had to be changed due to the relation of module `esp_now` to `esp_wifi` module. In addition, a number of corrections have been made. In the case of documentation, it is impossible to do this in various commits.
