Gunar Schorcht
08bd418baa
cpu/stm32/periph/usbdev_fs: coding style fix
2022-10-05 09:15:29 +02:00
Gunar Schorcht
7f4613da34
cpu/stm32/periph/usbdev_fs: changes to support STM32F3
2022-10-05 09:15:29 +02:00
Gunar Schorcht
1fde5a4401
cpu/stm32/periph/usbdev_fs: support GPIO for USB connect/disconnect
...
Since some STM32 MCU don't have internal D+ pullup, there are boards that use a GPIO for USB bus connect/disconnect.
2022-10-05 09:15:29 +02:00
Gunar Schorcht
3d1a3bf560
cpu/stm32/periph/usbdev_fs: allow USB signals as additional function
...
For a number of STM32 MCUs with the USB-FS device interface the signals USB_DP and USB_DM are not defined as GPIO alternative function but as additional function. Additional functions are directly selected/enabled through peripheral registers hand have not to be configured. In this case, the configuration defines GIO_AF_UNDEF as alternative function.
2022-10-04 13:59:43 +02:00
Gunar Schorcht
20bdd3452e
cpu/stm32/periph/usbdev_fs: conditional configuration of CRS
...
Conditional configuration of CRS_CR_AUTOTRIMEN allows the compilation of the driver for STM32 MCUs that don't have Clock Recovery System.
2022-10-04 13:59:43 +02:00
Gunar Schorcht
66d0f948ba
cpu/stm32/periph/usbdev_fs: fix register name
...
RCC_APB1SMENR1 is used if RCC_APB1SMENR_USBSMEN is defined. Without this fix, the conditional doesn't have any effect.
2022-10-04 13:59:43 +02:00
benpicco
429ee839cc
Merge pull request #18676 from krzysztof-cabaj/nucleo-l4r5zi-ADC
...
boards/nucleo-l4r5zi: support for ADC
2022-10-04 13:26:16 +02:00
krzysztof-cabaj
3a23f2632e
boards/nucleo-l4r5zi: add ADC support
2022-10-03 17:13:20 -04:00
Gunar Schorcht
78fc60c700
cpu/stm32: use usbdev_synopsys_dwc2 driver as periph_usbdev
2022-09-27 01:00:57 +02:00
Gunar Schorcht
7db66e49b3
drivers: add USB OTG FS/HS driver for Synopsys DWC2 IP core
2022-09-27 01:00:57 +02:00
Marian Buschsieweke
e402f1d885
Merge pull request #18418 from maribu/cpu/stm32/periph/stm32_eth_tracing
...
cpu/stm32/periph_eth: Add stm32_eth_tracing
2022-09-18 22:19:34 +02:00
Benjamin Valentin
838a5e4bd3
netdev_drivers: make sure to signal LINK_UP at least once
2022-09-16 22:57:28 +02:00
Benjamin Valentin
7abaae7bbd
treewide: fix typos
2022-09-15 12:12:23 +02:00
Marian Buschsieweke
44b62e879d
cpu/stm32/periph_eth: add stm32_eth_tracing
...
Add tracing support via GPIOs to trace the basic state of the Ethernet
peripheral. The following signals are provided:
- One GPIO pin is toggled on entry of the Ethernet ISR
- On TX start an GPIO is set, on TX completion it is cleared
- On RX complete an GPIO is set, once this is passed to the upper layer
the GPIO is cleared again
In order to reduce the overhead, GPIO LL is used. By default the
on-board LEDs are used as tracing GPIOs. This makes it easy to debug
when the state machine gets stuck without the need to attach a scope or
logic analyzer.
2022-09-14 14:00:27 +02:00
Marian Buschsieweke
efc307455e
cpu/stm32/periph_eth: increase debug output
2022-09-14 13:58:40 +02:00
Benjamin Valentin
74dc558972
cpu/{sam0_common, stm32}: select netdev_legacy_api in KConfig
2022-08-17 23:37:05 +02:00
Leandro Lanzieri
2dd59236c8
Merge pull request #18423 from MrKevinWeiss/pr/disable/hashchecks
...
.murdock: disable hash checks of kconfig/make
2022-08-17 18:30:36 +02:00
MrKevinWeiss
f79f43903d
cpu/periph_eth: Fix kconfig model
...
This probably can be done better as the periph_eth should not be
only part of the stm32 as the sam0 also uses it.
2022-08-17 14:37:22 +02:00
Marian Buschsieweke
bf67a9cdc5
cpu/stm32/periph_eth: optimize IRQ handler
...
We can just clear both TX and RX IRQ flags in any case, as clearing a
non-set flag is just a nop.
2022-08-09 07:33:34 +02:00
Marian Buschsieweke
82fbe08728
cpu/stm32/periph_eth: fix typo in initialization code
...
A single character type resulted in way fewer TX descriptors being
available than allocated. Not only resulted this in wasting memory,
but also when more iolist chunks than descriptors are send, the
```C
assert(iolist_count(iolist) <= ETH_TX_DESCRIPTOR_COUNT);
```
does not trigger. As a result, old TX descriptors are being overwritten
in this case.
2022-08-08 15:13:27 +02:00
Leandro Lanzieri
1716638792
cpu/stm32/periph_eth: model in Kconfig
2022-07-25 11:08:32 +02:00
benpicco
9b8f032c04
Merge pull request #17981 from maribu/gpio_ll/stm32
...
cpu/stm32: Implement periph/gpio_ll{,_irq} except for STM32F1
2022-05-24 11:34:53 +02:00
Marian Buschsieweke
bae91c1660
Merge pull request #17723 from benpicco/periph_timer_periodic-set_stopped
...
drivers/periph/timer: add TIM_FLAG_SET_STOPPED flag
2022-05-03 12:06:37 +02:00
Benjamin Valentin
d6b5bf33b2
cpu/stm32: timer: implement TIM_FLAG_SET_STOPPED
2022-04-28 13:27:59 +02:00
Marian Buschsieweke
8bab36f1c5
cpu/stm32: Implement periph/gpio_ll{,_irq} except for STM32F1
...
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
2022-04-22 14:34:57 +02:00
eb6afbba98
cpu/stm32: adapt ltdc periph disp_dev interface
2022-04-13 12:49:58 +02:00
Leandro Lanzieri
37908431a1
cpu/stm32/eth: call netdev register from the setup function
2022-03-24 09:44:54 +01:00
cb5fef4486
cpu/stm32: use HSI with I2C
2022-03-23 10:10:08 +01:00
Fabian Hüßler
e3509fc023
cpu/stm32: add sampling time to F4/F7 ADC driver
2022-02-21 10:49:43 +01:00
Fabian Hüßler
33c2944076
cpu/stm32: add VBAT for stm32
2022-02-21 10:49:43 +01:00
Karl Fessel
5e42af7935
cpu/stm32: i2c include panic.h
2022-02-12 18:30:58 +01:00
Fabian Hüßler
70d3d647d1
cpu/{cortexm_common, stm32}: add support for backup RAM
2022-01-21 15:53:18 +01:00
Francisco Molina
579ca6d941
drivers/periph_spi: spi_init_with_gpio_mode mode by reference
2022-01-18 16:22:18 +01:00
4e582b360f
cpu/stm32: add disp_dev interface for LTDC
2022-01-07 14:32:24 +01:00
deccc720e3
cpu/stm32: add support for LTDC periph
2022-01-07 14:32:24 +01:00
796e127df9
boards/stm32: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
2f0efa8c9e
cpu/stm32: add initial support for stm32u5 family
2021-12-23 11:04:41 +01:00
Francisco Molina
9438c20c59
cpu/stm32/periph: remove unused xtimer includ
2021-12-09 12:14:42 +01:00
Marian Buschsieweke
e071098d26
cpu/stm32/periph: use uintptr_t instead uintptr_t *
2021-12-03 14:21:54 +01:00
Marian Buschsieweke
509ced8abb
cpu/stm32/periph_can: use container_of()
...
This silences false positives of -Wcast-align
2021-12-03 10:12:35 +01:00
4d96c1f8e0
Merge pull request #17281 from dylad/pr/cpu/stm32/usbdev_fs_support
...
cpu/stm32: add new usbdev FS support
2021-12-02 21:57:49 +01:00
Marian Buschsieweke
ec39b8e3aa
Merge pull request #17320 from aabadie/pr/cpu/stm32_ztimer
...
cpu/stm32: migrate adc and eth periphs to ztimer
2021-12-02 20:05:43 +01:00
dylad
083e53406d
cpu/stm32: add support for a new USBDEV periph
...
Also rename the other usbdev driver to avoid conflicts
2021-12-02 14:26:03 +01:00
924c2fd6da
cpu/stm32/adc: migrate to ztimer
2021-12-02 13:44:03 +01:00
0c7d2a0f55
cpu/stm32/eth: migrate to ztimer
2021-12-02 12:22:41 +01:00
f07696e7a2
cpu/stm32/usbdev: poweron USB during initialization
2021-12-01 10:15:19 +01:00
Gunar Schorcht
007e29ebb5
cpu/periph/i2c: update implementations to new I2C API
...
Make all `spi_acquire` implementations return `void` and add assertions to check for valid device identifier where missing.
2021-11-29 06:35:25 +01:00
c81df904ea
stm32/usbdev: Adapt to xmit API
2021-11-16 20:17:04 +01:00
76215adef1
Merge pull request #17154 from maribu/cpu/stm32/periph_usb
...
cpu/stm32/periph/usbdev: fix alignment issues
2021-11-16 11:20:34 +01:00
Francisco Molina
63c51d4add
cpu/stm32/wl: initial periph_adc implementation
2021-11-15 09:52:45 +01:00
