Gunar Schorcht
405be02da4
cpu/esp8266: funcs must not be called in assert
...
In vendor startup code, initialization function were called as parameters of assert statement. With DEVELHELP, they are not called since the assert macro does nothing.
2019-11-14 13:58:48 +01:00
Gunar Schorcht
2c7b9b4fb4
cpu/esp8266: toolchain renamed
...
To make the migration progress to the new RTOS SDK easier, the new toolchain was renamed to xtensa-esp8266-elf. This makes it possible to have the new and the old toolchain installed in parallel.
2019-11-14 13:58:48 +01:00
Gunar Schorcht
b15d7df6dc
cpu/esp8266: ESP8266_SDK_DIR renamed
...
To make the migration progress to the new RTOS SDK easier, the ESP8266_SDK_DIR variable was renamed to ESP8266_RTOS_SDK_DIR.
2019-11-14 13:58:44 +01:00
Gunar Schorcht
9facce8c02
cpu/esp8266: use default number of priority levels
...
If the WiFi module is used, a number of high priority tasks is created. To void priority collisions with netdev drivers, the number of priorities SCHED_PRIO_LEVELS has to be increased to 32. But in other cases, the default number should be used, also to keep automatic tests working.
2019-11-14 13:58:25 +01:00
Gunar Schorcht
afa02044f2
cpu/esp8266: required bootloader binaries
2019-11-14 13:58:25 +01:00
Gunar Schorcht
4f4d882f68
cpu/esp32: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Gunar Schorcht
e5b7645b0b
boards/esp32: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Gunar Schorcht
7d9a3a79a2
boards/esp8266: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Gunar Schorcht
ddc91df4ca
cpu/esp8266: changes for RTOS SDK
2019-11-14 13:58:22 +01:00
Gunar Schorcht
074369fbb5
pkg/lwip: changes for ESP8266 esp_wifi
2019-11-14 12:04:29 +01:00
Gunar Schorcht
a212228147
cpu/esp8266: files that are not needed any longer removed
2019-11-14 12:04:29 +01:00
Gunar Schorcht
28ea0a0914
cpu/esp8266: required vendor RTOS SDK components added
2019-11-14 12:04:21 +01:00
Gunar Schorcht
f397a74948
cpu/esp8266: FreeRTOS adaption layer added for RTOS SDK
2019-11-13 19:00:39 +01:00
Gunar Schorcht
dca6d59b60
cpu/esp_common: vendor files changed for RTOS SDK
2019-11-08 13:22:50 +01:00
Gunar Schorcht
a6d01fc2de
cpu/esp8266: vendor files changed for RTOS SDK
2019-11-08 10:32:18 +01:00
Gunar Schorcht
464bb9f4c4
cpu/esp8266: vendor files that are no longer needed removed
2019-11-08 10:32:18 +01:00
benpicco
c1edee074a
Merge pull request #12661 from benpicco/xtimer_fix_doc
...
sys/xtimer: fix generation of documentation
2019-11-07 14:27:58 +01:00
Martine Lenders
a132b2b413
Merge pull request #12220 from miri64/gnrc_sixlowpan_frag/feat/srf-config
...
gnrc_sixlowpan_frag: initial import of SRF parameters
2019-11-07 14:13:15 +01:00
Benjamin Valentin
6add264f6a
sys/xtimer: fix generation of documentation
...
cd1ce6b98d
2019-11-07 13:34:27 +01:00
7e42f6e4d5
Merge pull request #12659 from aabadie/pr/cpu/atmega_common_wdt
...
cpu/atmega_common: add implementation for watchdog
2019-11-07 12:32:46 +01:00
Martine S. Lenders
da74936020
gnrc_sixlowpan_frag: initial import of SRF parameters
...
This imports the protocol parameters for Selective Fragment Recovery
(SFR). For the values I took some educated guesses based on my
experience with previous experimentation with fragment forwarding.
The defines currently are based on [draft v7].
[draft v7]: https://tools.ietf.org/html/draft-ietf-6lo-fragment-recovery-07#section-7.1
fixup! gnrc_sixlowpan_frag: initial import of SRF parameters
2019-11-07 12:16:30 +01:00
José Alamos
20ea18637f
Merge pull request #10485 from miri64/gnrc_netif/enh/default-init
...
gnrc_netif: assume `netif->ops->init()` to be set to at least a default
2019-11-07 11:41:05 +01:00
d22404b8b7
cpu/atmega_common: add implementation for watchdog
2019-11-07 11:35:29 +01:00
benpicco
9f0a29dfc3
Merge pull request #12656 from basilfx/feature/efm32_gecko_sdk_26
...
pkg/geck_sdk: update to version 2.6
2019-11-07 11:22:44 +01:00
Martine Lenders
8eee53b7bd
tests/gnrc_ipv6_ext_frag: add bl*pill to BOARD_INSUFFICIENT_MEMORY
2019-11-07 11:04:58 +01:00
Martine Lenders
6493a9e69f
gnrc_netif: assume netif->ops->init() to be set
2019-11-07 11:00:36 +01:00
Martine Lenders
14a2f6bc18
gnrc: use gnrc_netif_default_init() for all implementations
2019-11-07 11:00:36 +01:00
Martine Lenders
a1d402e015
Merge pull request #12559 from miri64/gnrc_sixlowpan_frag/enh/factor-out-frag-buf
...
gnrc_sixlowpan_frag: factor-out and rename fragmentation buffer
2019-11-07 09:47:46 +01:00
Bas Stottelaar
d0ff9530d3
cpu/efm32: update vendor code
2019-11-06 23:25:53 +01:00
Bas Stottelaar
f5ddc372e7
pkg/gecko_sdk: update to version 2.6
2019-11-06 23:11:39 +01:00
Martine Lenders
09b5db28f1
gnrc_netif: expose common init function as default
2019-11-06 18:45:16 +01:00
Martine Lenders
4b82a56c89
gnrc_netif: introduce common init function
2019-11-06 18:45:15 +01:00
08e1cf2d8e
Merge pull request #12634 from aabadie/pr/drivers/hd44780_fix_sam0
...
drivers/hd44780: fix potential hardfault during initialization
2019-11-06 17:18:16 +01:00
62d299459f
drivers/hd44780: optimize detection of 4 and 8 bit modes
...
The driver can only be used with either 4 or 8 bit modes. Checking if the 5th pin is set in the configuration is enough the determine if 8bit mode should be used or not
2019-11-06 16:27:39 +01:00
6c56972dba
drivers/include/hd44780: avoid use of magic numbers
2019-11-06 16:25:27 +01:00
c7fac09d42
drivers/hd44780: fix potential hardfault on initialization
...
Co-authored-by Benjamin Valentin <benpicco@googlemail.com>
2019-11-06 16:14:39 +01:00
benpicco
8c181d8ecd
Merge pull request #12653 from benpicco/sam0-fix-opencd-debug
...
makefiles/sam0: fix debugging with edbg
2019-11-06 16:04:50 +01:00
Benjamin Valentin
756cab9385
makefiles/sam0: fix debugging with edbg
...
OpenOCD should *always* be included for debugging if JLinkExe is not used.
fixes #12652
2019-11-06 15:43:15 +01:00
Marian Buschsieweke
cd298b9c4e
Merge pull request #12649 from aabadie/pr/boards/atmega256rfr2-xpro_fixes
...
boards/atmega256rfr2-xpro: update clock configuration/stdio baudrate + a test timeout
2019-11-06 15:21:32 +01:00
bd39ce3179
tests/periph_gpio: increase timeout for automatic test
...
periph_gpio requires more time to complete on slow platforms, like AVR
2019-11-06 12:46:28 +01:00
cab3cc473e
tests/periph_timer: add atmega256rfr2-xpro to boards with 25KHz timer
2019-11-06 12:46:28 +01:00
42c4b7d34d
boards/atmega256rfr2-xpro: use 115200 baudrate for STDIO
2019-11-06 12:46:28 +01:00
485bfc45da
boards/atmega256rfr2-xpro: document how to configure the fuses
...
This is important for a correct configuration of the external 16MHz oscillator
2019-11-06 12:46:28 +01:00
498cbe9bbc
boards/atmega256rfr2-xpro: configure external 16MHz oscillator
2019-11-06 12:46:28 +01:00
Marian Buschsieweke
d02ed3a3ff
Merge pull request #12646 from maribu/atmega328p-timer
...
boards/atmega328p: Fixed xtimer frequency
2019-11-05 22:19:09 +01:00
Marian Buschsieweke
f55e438d56
boards/atmega328p: Fixed xtimer frequency
...
The ATmega328p on a breadboard can have various frequencies depending on
the fuse settings and whether and which crystal is connected. Thus, finding a
fixed xtimer frequency that can be configured for every CPU core clock with the
available prescalers is not possible. Therefore, the fixed frequency is replaced
by a frequency depending on the CPU clock speed. For CPU clock frequency of
more than 4 MHz a prescaler of 64 will be chosen (same as on the Arduino Uno),
for 4 MHz and less a prescaler of 8 will be chosen.
2019-11-05 19:32:29 +01:00
benpicco
035bac0bf4
Merge pull request #12639 from aabadie/pr/boards/atmega256rfr2
...
boards/atmega256rfr2-xpro: initial support
2019-11-05 19:03:49 +01:00
Marian Buschsieweke
4d279ae76e
Merge pull request #12055 from fabian18/driver-ina3221
...
Driver for INA3221 current and power and bus voltage monitor
2019-11-05 14:45:03 +01:00
benpicco
2390d494a9
Merge pull request #12640 from benpicco/rtc_tm_compare
...
periph_common/rtc: add rtc_tm_compare()
2019-11-05 13:20:49 +01:00
Benjamin Valentin
24ae298115
unittests: add rtc_tm_compare() to unittest
2019-11-05 12:52:45 +01:00
