19565: tests: move core related applications to their own tests/core/ folder r=maribu a=aabadie
19568: tests: move remaining driver related applications to tests/drivers r=maribu a=aabadie
19574: cpu/stm32/periph_gpio: reset PU/PD for ADC channels r=maribu a=gschorcht
### Contribution description
This PR provides a small fix that is relevant when a GPIO has been used as input/output with a pull resistor before it is initialized as an ADC channel.
The PU/PD configuration has to be `0b00` for analog outputs which is corresponds to the reset state. However, if the GPIO is not in the reset state but was used digital input/output with any pull resistor, the PU/PD configuration has also to be reset to use it as ADC channel.
### Testing procedure
- Green CI
- The `periph_adc` test application should still work for any board that supports the `periph_adc` feature.
### Issues/PRs references
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19577: cpu/esp32: fix remaining compilation errors for GCC 12.2 r=maribu a=gschorcht
### Contribution description
This PR fixes one problem of CI compilation.
With [PR #227](https://github.com/RIOT-OS/riotdocker/pull/227) `riotdocker` was updated to GCC 12.2 . Obviously, following parts were not covered by compilation test before:
- [ ] `esp_eth`
- [ ] `esp_hw_counter`
- [ ] `esp_can`
### Testing procedure
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19484: makefiles/arch/msp430.inc.mk: Fix compilation issues with GCC 12 r=maribu a=maribu
### Contribution description
This fixes the following compilation issues:
/home/maribu/Repos/software/RIOT/cpu/msp430fxyz/periph/gpio.c: In function 'gpio_periph_mode':
/home/maribu/Repos/software/RIOT/cpu/msp430fxyz/periph/gpio.c:95:15: error: array subscript 0 is outside array bounds of 'msp_port_isr_t[0]' [-Werror=array-bounds]
95 | sel = &(isrport->SEL);
| ^~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
by adding `CFLAGS += --param-min-pagesize=0` for GCC 12 (same issue as already fixed for AVR).
and:
/usr/lib/gcc/msp430-elf/12.2.0/../../../../msp430-elf/bin/ld: warning: /home/maribu/Repos/software/RIOT/cpu/msp430_common/ldscripts/xfa.ld contains output sections; did you forget -T?
by adding the missing `-T`.
### Testing procedure
The following should still work:
- `make BOARD=msb-430 -C examples/hello-world`
- `make BOARD=msb-430 -C tests/xfa flash test`
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19575: treewide: fix format specifiers r=maribu a=maribu
### Contribution description
This brings format specifiers and the passed type back into sync. This won't change observable behavior in one case, and won't even change machine code in the other. But formally, this fixes bugs.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19564: tests: move all bench applications to their own tests/bench/ folder r=aabadie a=aabadie
19569: tests/lua_loader: move to tests/pkg/lua_loader r=aabadie a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
PU/PD configuration has to be `0b00` for analog outputs which is corresponds to the reset state. However, if the GPIO is not in reset state but was used digital input/output with any pull resistor, the PU/PD configuration has also to be reset to work as ADC channel.
GCC 12 gives out of bounds warnings when the resulting address is out
of bounds of what GCC assumes to be the valid address space. It seems
that by default the address 0x0 is not considered valid (which would
be a NULL pointer and typically not mapped in a userspace behind an MMU
scenario), but in fact is valid on bare metal hardware. At least on
AVR and MSP430 this needs to be set. On many Cortex M MCUs 0x0 is also
a valid address (e.g. often the flash is mapped there), but seemingly
for them `--param=min-pagesize=0` is already the default. In any case,
it won't hurt to set it explicit for them as well.
An `INSERT AFTER` directive no longer can refer to a different linker
script included with `-T path/to/script.ld`. Instead, this adds wrapper
linker scripts that just `INCLUDE` the three individual linker scripts.
This way, the xfa.ld can safely refer back to sections defined in
the vendor linker script.
For some reason, this approach cause the exact issue it fixes for
binutils 2.40 with the binutils in the CI. We stick with the old
linker flags with binutils prior 2.40 to be compatible with both
conflicting behaviors.
The best approach would be to come up with something that works across
different versions of binutils; but no such solution materialized.
18788: pkg/lvgl: Change all references of LittlevGL to LVGL in doc.txt r=aabadie a=OkiStuff
Change all references of LittlevGL to LVGL in pkg/lvgl/doc.txt per request of LVGL team (https://github.com/lvgl/lvgl/pull/3761)
### Contribution description
Changing parts of the pkg/lvgl/doc.txt to replace "LittlevGL" to LVGL as per request of the LVGL team
### Issues/PRs references
https://github.com/lvgl/lvgl/pull/3761
Co-authored-by: Frankie A <40648091+OkiStuff@users.noreply.github.com>
19552: tests: move all periph applications to their own periphs/ folder r=gschorcht a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
