19730: boards/qn9080dk: fix periph conflict r=maribu a=maribu
### Contribution description
- Document which I2C/SPI/UART peripheral maps to which FLEXCONN IP block to easily detect potential overlap
- Switch conflict between SPI and I2C peripheral by using a different FLEXCONN for I2C
19731: boards/qn9080dk: update doc on flashing r=maribu a=maribu
### Contribution description
- update the doc on the internal programmer firmware:
- not only switching to J-Link, but also just updating it does improve reliability of flashing
- give hints in how to get the ~~shitty~~ wonderful update process working
- update notes on OpenOCD requirements
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
- update the doc on the internal programmer firmware:
- not only switching to J-Link, but also just updating it does
improve reliability of flashing
- give hints in how to get the ~~shitty~~ wonderful update process
working
- update notes on OpenOCD requirements
- Document which I2C/SPI/UART peripheral maps to which FLEXCONN IP
block to easily detect potential overlap
- Switch conflict between SPI and I2C peripheral by using a different
FLEXCONN for I2C
19580: board: add Adafruit Grand Central M4 Express support r=maribu a=gschorcht
### Contribution description
This PR provides the support for Adafruit Grand Central M4 Express board. The main features of the board are:
- ATSAMD51 Cortex M4 running at 120 MHz
- 1MB Flash
- 256 KB RAM
- external 8 MB QSPI Flash storage
- Micro SD Card slot connected to SPI
### Testing procedure
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19722: tools/jlink.sh: start gdb server with setsid r=maribu a=OlegHahm
Adopted from openocd script in order to prevent killing the gdb server upon SIGINT.
Thanks to `@maribu` for the pointer.
### Contribution description
Prevent gdb server from being killed by SIGINT when using jlink for debugging.
### Testing procedure
Debug any arbitrary RIOT application on a board where jlink is supported as a programmer and `PROGRAMMER` is set to `jlink` by calling `make debug`. Hit Ctrl-C. The program debugging should get interrupted but can be continued via `continue`.
Co-authored-by: Oleg Hahm <oleg@riot-os.org>
19706: boards/olimex-msp430-h2618: add new board r=maribu a=maribu
### Contribution description
This adds support of the Olimex MSP430-H2618 board. This board has plenty of RAM and ROM for an MSP430 board (even more than the z1), but still is easily obtainable.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
19212: shell/rtc: use rtc_tm_normalize() to sanitize input r=benpicco a=benpicco
19360: gcoap: make use coap_build_reply() in gcoap_resp_init() r=benpicco a=benpicco
19401: shell/cmds: add genfile command r=benpicco a=benpicco
19645: sys/isrpipe: Replace xtimer with ztimer_usec r=benpicco a=MrKevinWeiss
### Contribution description
Getting ready for the xtimer dep.
### Testing procedure
Green murdock, there is no explicit test for isrpipe but since it runs xtimer compat it should operate the same.
### Issues/PRs references
19720: tests: remove unnecessary use of floating point r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
19695: drivers/hih6130: avoid using floats r=maribu a=maribu
### Contribution description
- avoid using floating point arithmetic
- use ztimer instead of xtimer
- use fmt to print fixed point numbers in the test app
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
19717: boards/rpi-pico: update openocd.cfg file r=aabadie a=dylad
### Contribution description
This PR fixes the use of openOCD to flash a rpi-pico board.
Currently on master, trying to flash this board with openOCD (v12) and a CMSIS-DAP probe fails.
with this PR, it now works as expected (even debugging)
Moreover, the configuration file used by RIOT is now deprecated on openOCD v12 so changes it while we're at it.
master:
```
### Flashing Target ###
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
swd
Warn : rp2040-core0.cfg configuration file is deprecated and will be
removed in the next release. Use following parameters instead:
-c 'set USE_CORE 0' -f target/rp2040.cfg
Warn : Transport "swd" was already selected
adapter speed: 4000 kHz
Info : Using CMSIS-DAPv2 interface with VID:PID=0x2e8a:0x000c, serial=E46170D59B552B2C
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 0 TDI = 0 TDO = 0 nTRST = 0 nRESET = 0
Info : CMSIS-DAP: Interface ready
Info : clock speed 4000 kHz
Info : SWD DPIDR 0x0bc12477
Error: [rp2040.cpu] Could not find MEM-AP to control the core
Warn : target rp2040.cpu examination failed
Info : starting gdb server for rp2040.cpu on 0
Info : Listening on port 37347 for gdb connections
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* rp2040.cpu cortex_m little rp2040.cpu unknown
Error: [rp2040.cpu] Could not find MEM-AP to control the core
Error: [rp2040.cpu] Debug AP not available, reset NOT asserted!
make: *** [/home/dylan/work/RIOT/examples/blinky/../../Makefile.include:855: flash] Error 1
make: Leaving directory '/home/dylan/work/RIOT/examples/blinky'
```
with this PR:
```
### Flashing Target ###
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
swd
Warn : Transport "swd" was already selected
adapter speed: 4000 kHz
Info : Using CMSIS-DAPv2 interface with VID:PID=0x2e8a:0x000c, serial=E46170D59B552B2C
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.0.0
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 0 TDI = 0 TDO = 0 nTRST = 0 nRESET = 0
Info : CMSIS-DAP: Interface ready
Info : clock speed 4000 kHz
Info : SWD DPIDR 0x0bc12477, DLPIDR 0x00000001
Info : SWD DPIDR 0x0bc12477, DLPIDR 0x10000001
Info : [rp2040.core0] Cortex-M0+ r0p1 processor detected
Info : [rp2040.core0] target has 4 breakpoints, 2 watchpoints
Info : [rp2040.core1] Cortex-M0+ r0p1 processor detected
Info : [rp2040.core1] target has 4 breakpoints, 2 watchpoints
Info : starting gdb server for rp2040.core0 on 0
Info : Listening on port 40985 for gdb connections
Info : starting gdb server for rp2040.core1 on 0
Info : Listening on port 39901 for gdb connections
TargetName Type Endian TapName State
-- ------------------ ---------- ------ ------------------ ------------
0* rp2040.core0 cortex_m little rp2040.cpu running
1 rp2040.core1 cortex_m little rp2040.cpu running
[rp2040.core0] halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x000000ee msp: 0x20041f00
[rp2040.core1] halted due to debug-request, current mode: Thread
xPSR: 0xf1000000 pc: 0x000000ee msp: 0x20041f00
Info : Found flash device 'win w25q16jv' (ID 0x001540ef)
Info : RP2040 B0 Flash Probe: 2097152 bytes `@0x10000000,` in 32 sectors
Info : Padding image section 2 at 0x10003190 with 112 bytes (bank write end alignment)
Warn : Adding extra erase range, 0x10003200 .. 0x1000ffff
auto erase enabled
wrote 12800 bytes from file /home/dylan/work/RIOT/tests/leds/bin/rpi-pico/tests_leds.elf in 1.516848s (8.241 KiB/s)
verified 12688 bytes in 0.089461s (138.503 KiB/s)
shutdown command invoked
Done flashing
```
### Testing procedure
Flash a `rpi-pico` board using openOCD.
### Issues/PRs references
None.
Co-authored-by: dylad <dylan.laduranty@mesotic.com>
19705: boards/z1: fix broken clock configuration r=maribu a=maribu
### Contribution description
The MSP430F2xx family has on RSEL bit more than the MSP430x1xxx family. The first commit updates the clock calibration accordingly.
df5c319978 from https://github.com/RIOT-OS/RIOT/pull/19558 broke the clock configuration of the Z1 by relying on the incorrect documentation of what clock is actually used. Closely reading the convoluted clock initialization code revealed that no XT2 crystal is present (as also indicated by some comments in `board.c`), contradicting the `#define MSP430_HAS_EXTERNAL_CRYSTAL 1` in the `board.h`.
The second commit should restore behavior (but with calibrated DCO than hard coded magic numbers).
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
df5c319978 from
https://github.com/RIOT-OS/RIOT/pull/19558 broke the clock
configuration of the Z1 by relying on the incorrect documentation of
what clock is actually used. Closely reading the convoluted clock
initialization code revealed that no XT2 crystal is present (as also
indicated by some comments in `board.c`), contradicting the
`#define MSP430_HAS_EXTERNAL_CRYSTAL 1` in the `board.h`.
This now should restore behavior (but with calibrated DCO than
hard coded magic numbers).
19715: drivers/mrf24j40: add note about missing wake pin handling r=maribu a=maribu
### Contribution description
This adds a note that wake pin handling is not implemented and users need to connect the wake pin to VCC, or drive it high in the board / application logic prior to initializing the driver.
19716: boards/olimex-msp430-h1611: fix doc r=maribu a=maribu
### Contribution description
The statement about the missing pin 1 marking on the JTAG header is not correct. It's just a bit hidden between the JTAG header and the power selector jumper.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@posteo.net>
The statement about the missing pin 1 marking on the JTAG header is
not correct. It's just a bit hidden between the JTAG header and the
power selector jumper.
19708: boards/esp32s3-pros3: Fix stdio kconfig model r=MrKevinWeiss a=MrKevinWeiss
### Contribution description
Always something...
It seems like the desired behaviour (if we use `MODULE_USBUS`, then override the `MODULE_STDIO_USB_SERIAL_JTAG`) requires selection of MODULE_USBUS_CDC_ACM. Seems to be a bit of a corner case.
### Testing procedure
Let's see if murdock can test faster than my cpu.
### Issues/PRs references
Failure in master
Co-authored-by: MrKevinWeiss <weiss.kevin604@gmail.com>
19693: sys/color: extend unittest and fix module r=maribu a=kfessel
### Contribution description
this extends the unittest for sys_color testing more colors
### Testing procedure
```
RIOT_tree/tests/unittests$ make tests-color test
```
will fail since our `rgb2hsv` implementation is wrong (or is using an other colorspace than hsv2rgb (without documenting))
the new `hsv2rgb` test will succeed
### Issues/PRs references
#19614 was the reason i had a look at this
#1315 added the rgb2hsv and hsv2rgb function
#9940 added the test for black special case
https://www.vagrearg.org/content/hsvrgb << some optimization for that function (avoiding float)
Co-authored-by: Karl Fessel <karl.fessel@ovgu.de>
