RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
27,325 Commits 40 Branches 189 Tags 262 MiB
077a15f254
Commit Graph

3914 Commits

Author SHA1 Message Date
Koen Zandberg
8931889865
pinetime: add erase timings to mtd_spi_nor instance 2020-03-03 09:49:08 +01:00
Koen Zandberg
dcdaf8a2ab
mulle: add erase timings to mtd_spi_nor instance 2020-03-03 09:49:08 +01:00
Juergen Fitschen
a9faac7218 boards/samr30-xpro: fix AT86RF212B communication 
This board is driven by a 16MHz clock source. In this case, the baud rate generator is able to clock the SPI interface with 4MHz or 8MHz only.
Due to integer division and rounding, the interface is actually driven with 8MHz, which is too fast for the AT86RF212.
 2020-03-02 18:38:04 +01:00
Francisco
5af4c5a9c5
Merge pull request #13470 from kfessel/fix13179 
boards/nucleo-f767zi: Fix13179 make nucleo-f767zi debuggable again
 2020-02-28 17:42:10 +01:00
benpicco
2ebf1d68b4
Merge pull request #13497 from benpicco/openmote-b-fixes 
boards/openmote-b: add saul config, add note about flashing
 2020-02-28 14:59:25 +01:00
Karl Fessel
979b4d5cf7 Revert "boards/nucleo-f767zi: add correct flash bank openocd config" 
This reverts commits:
    - 1dec5ba61b
    - 53f60db66f
 2020-02-28 13:51:58 +01:00
Benjamin Valentin
961b333ea6 boards/openmote-b: add saul config 
Hook up the GPIOs and the si7006 sensor to SAUL.
 2020-02-28 13:37:15 +01:00
Benjamin Valentin
bf96e97e34 boards/openmote-b: extend doc.txt about flashing 
To flash the board the intelhex python package needs to be installed.
Add a note about it to the documentation.
 2020-02-28 13:37:15 +01:00
benpicco
23c5d34284
Merge pull request #10846 from benemorius/kw41z-mini 
boards: add support for kw41z-mini
 2020-02-28 07:40:25 +01:00
Thomas Stilwell
ef6024cf1a boards: add kw41z-mini 2020-02-27 21:34:04 -06:00
Benjamin Valentin
9d1a2b5fb4 boards/mcb2388: add I2C config 
The pins for I2C0 and I2C1 are available on the board,
nothing is wired up to them.
 2020-02-26 23:41:38 +01:00
Benjamin Valentin
4d5d3eb9e6 boards/msba2: hook up i2c 
I2C is not used by any chip on the board, but I2C2 is availiable
on the JP3 connector (shared with UART2).

 - SDA: P0.10
 - SCL: P0.11
 2020-02-26 23:41:38 +01:00
Kaspar Schleiser
cbb248319e boards/pinetime: update mtd_spi_nor config 2020-02-26 10:00:55 +01:00
Kaspar Schleiser
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct 
mtd_spi_nor: Move const params to separate struct
 2020-02-26 09:43:18 +01:00
Peter Kietzmann
a27b58fbba
Merge pull request #13479 from MichelRottleuthner/pr_phytec_fix_tmp_addr 
boards/pba-d-01-kw2x: add config for tmp006 addr
 2020-02-25 21:04:20 +01:00
Koen Zandberg
a8231f2079
Merge pull request #13161 from bergzand/pr/pinetime/mtd 
pinetime: add MTD configuration
 2020-02-25 20:44:59 +01:00
Michel Rottleuthner
9ec1a6fab5 boards/pba-d-01-kw2x: add config for tmp006 addr 2020-02-25 20:25:26 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom 
Driver for AT24CXXX EEPROM
 2020-02-25 18:16:45 +01:00
Kaspar Schleiser
0d468c1068 boards/common/silabs: remove OPENOCD_CONFIG export 2020-02-25 17:26:00 +01:00
Kaspar Schleiser
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export 
tools/openocd: only export OPENOCD_CONFIG to required targets
 2020-02-25 15:11:38 +01:00
Koen Zandberg
514873fe12
pinetime: add MTD configuration 2020-02-25 14:31:39 +01:00
Kaspar Schleiser
785052e410
Merge pull request #13468 from aabadie/pr/tools/bossa_rework 
tools/bossa: split between 1.8 and 1.9 versions
 2020-02-25 13:32:38 +01:00
Alexandre Abadie
d41621e95f
boards/arduino-due: force bossa 1.8 version 2020-02-25 11:49:10 +01:00
Alexandre Abadie
fe8c242a30
boards/native: remove exports of UNDEF vars 2020-02-25 09:40:34 +01:00
benpicco
77d6eaaf19
Merge pull request #13461 from benpicco/sam_xpro-led-fix 
boards/samXXX-xpro: clear LED on init
 2020-02-24 21:56:36 +01:00
Benjamin Valentin
bc5ac92cff boards/samXXX-xpro: clear LED on init 
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
 2020-02-24 19:44:36 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700 
boards/any silabs: Allow selecting OpenOCD
 2020-02-24 19:12:43 +01:00
fabian18
07f7d818bd boards/same54-xpro: use at24cxxx EEPROM 2020-02-24 14:00:25 +01:00
Alexandre Abadie
9363f077d6
boards: don't export globally OPENOCD_CONFIG 
The variable is already exported to required target in openocd.inc.mk
 2020-02-24 10:04:11 +01:00
Alexandre Abadie
bd081cd980
tools/openocd: remove default OPENOCD_CONFIG value 
The default value is already set in openocd.inc.mk
 2020-02-24 10:04:11 +01:00
Alexandre Abadie
d7cbfe4f45
Merge pull request #13378 from francois-berder/nucleo-doc-cleanup 
boards: nucleo*: Cleanup documentation
 2020-02-24 08:01:42 +01:00
Jean Pierre Dudey
130467dd91
cc1312-launchpad: add board documentation 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-02-22 12:43:11 -05:00
benpicco
ce947b4824
Merge pull request #12955 from gschorcht/cpu/esp/deduplicate_and_cleanup 
cpu/esp*: code deduplication and cleanup
 2020-02-22 13:03:18 +01:00
benpicco
261ede7b79
Merge pull request #13414 from benpicco/boards/same54-xpro/peripheral-clocks 
boards/same54-xpro: don't source peripheral clocks from main clock
 2020-02-21 23:25:22 +01:00
benpicco
8d77ec55ae
Merge pull request #13409 from aabadie/pr/cpu/nrf_gpio_t 
cpu/nrf5x: provide gpio_t type definition
 2020-02-21 18:55:46 +01:00
Martine Lenders
4be4f5ad0a boards/native: add deprecation warnings for make all-debug 2020-02-21 12:51:41 +01:00
Martine Lenders
1786a8353a boards/native: remove now unnecessary -g3 CFLAGS 
dbd865413c made `-g3` default for
`make all` so all targets dependent on `make all` do not require it any
longer.
 2020-02-21 12:50:02 +01:00
benpicco
ea24d30e7a
Merge pull request #13417 from gschorcht/boards/esp32/doc_remove_mcu_table 
boards/esp32: remove MCU feature table in board documentation
 2020-02-21 10:13:44 +01:00
Gunar Schorcht
d251ffd205 boards/esp8266: enable arduino feature 2020-02-21 09:09:34 +01:00
Gunar Schorcht
51200364da boards/esp8266: fix ARDUINO_LED definitions 
ARDUINO_LED specifies the according Arduino pin to which the LED is connected and not the GPIO.
 2020-02-21 09:09:34 +01:00
Cenk Gündoğan
86fcc35994
Merge pull request #13423 from kaspar030/turn_on_native_debug 
native: turn on creation of debug symbols (CFLAGS += -g)
 2020-02-20 18:20:11 +01:00
Kaspar Schleiser
dbd865413c native: turn on creation of debug symbols (CFLAGS += -g) 2020-02-20 17:06:56 +01:00
Alexandre Abadie
e324b22c96
Merge pull request #13418 from gschorcht/boards/esp32/fix_btn0_pin 
boards/esp32: rename BUTTON0_PIN to BTN0_PIN
 2020-02-20 14:40:39 +01:00
Gunar Schorcht
6a7ba7ba1a boards/esp32: rename BUTTON0_PIN to BTN0_PIN 
Since a number of applications rely on the existence of the BTN0_PIN definition, the BUTTON0_PIN  definition has been renamed to BTN0_PIN to make the ESP32 boards compatible with these applications. However, for compatibility with earlier versions, BUTTON0_PIN is still defined as an alias of BTN0_PIN.
 2020-02-20 12:14:44 +01:00
Gunar Schorcht
e4b3ce7c91 boards/esp32: remove MCU feature table in doc 
Instead of using the same MCU feature table in every board documentation, it refers to the MCU documentation. This makes it easier to maintain the MCU feature table.
 2020-02-20 08:47:18 +01:00
Alexandre Abadie
6182e7c977
boards/nrf52: remove uint8_t cast for GPIO_UNDEF 2020-02-19 19:16:58 +01:00
Benjamin Valentin
3ee7b72431 boards/same54-xpro: don't source peripheral clocks from main clock 
Use the dedicated 48 MHz clock as a source for the peripheral clocks.
This was already done for I2C to allow it to work despite the 120 MHz
main clock.

Not running the peripherals off the main clock will allow for dynamic
re-clocking of the main clock in the future, without affecting the
operation of the peripherals.

It also gives more flexibility to the main clock selection in general.
 2020-02-19 17:52:12 +01:00
Sebastian Meiling
85c01f2ebd boards: update supported features of pba-d-01-kw2x 2020-02-18 11:42:05 +01:00
Sebastian Meiling
867090c579 boards: update links in doc of pba-d-01-kw2x 2020-02-18 11:40:34 +01:00
Sebastian Meiling
a9cb3b637f boards: add pinout ref for pba-d-01-kw2x 2020-02-18 11:40:34 +01:00
Yegor Yefremov
5cd205dffd boards/esp32-ttgo-t-beam: correct SX127x chip frequencies 
According to the datasheet, SX1278 covers frequencies till 525MHz
and hence, cannot be used for the 868/915 MHz band. So swap both
chips.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
 2020-02-17 10:15:40 +01:00
chrysn
f4b1d60887 boards/*silabs: Move programmer selection to common 
This removes duplication for the jlink case (keeping only any
non-default values in the board makefiles), and opens up STK3700's
OpenOCD programmability for generic boards.
 2020-02-14 09:42:20 +01:00
chrysn
80167b8ba4 boards/stk3700: Use OpenOCD-shipped board file 2020-02-14 09:29:32 +01:00
chrysn
4387739494 boards/stk3700: Allow selecting OpenOCD 
OpenOCD works well with those devices; the OpenOCD config is provided at
the default location and only needs to refer to the setup that OpenOCD
ships.
 2020-02-14 08:56:27 +01:00
Francois Berder
99142b170c boards: nucleo-l152re: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:43:20 +00:00
Francois Berder
7222f42c86 boards: nucleo-f446ze: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:42:49 +00:00
Francois Berder
343f39174e boards: nucleo-f446re: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:42:20 +00:00
Francois Berder
a42b5d79ab boards: nucleo-f411re: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:41:13 +00:00
Francois Berder
8f766d594e boards: nucleo-f410rb: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:40:48 +00:00
Francois Berder
5b81034fa1 boards: nucleo-f401re: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:39:39 +00:00
Francois Berder
1b27d5cb9a boards: nucleo-f334r8: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:39:11 +00:00
Francois Berder
6fb2275452 boards: nucleo-f303ze: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:38:40 +00:00
Francois Berder
a8cec40371 boards: nucleo-f303re: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:38:15 +00:00
Francois Berder
3739d81aad boards: nucleo-f303k8: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:37:32 +00:00
Francois Berder
b475598cb8 boards: nucleo-f302r8: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:36:34 +00:00
Francois Berder
d28fb30797 boards: nucleo-f207zg: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:35:54 +00:00
Francois Berder
2cb858c72b boards: nucleo-f103rb: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:35:21 +00:00
Francois Berder
3e22a77bf0 boards: nucleo-f091rc: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:34:45 +00:00
Francois Berder
7145e56e74 boards: nucleo-f072rb: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:34:03 +00:00
Francois Berder
7c9bbf5d9b boards: nucleo-f070rb: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:33:46 +00:00
Francois Berder
43a475fef8 boards: nucleo-f030r8: Cleanup documentation 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-13 19:32:50 +00:00
Benjamin Valentin
02e1c0a4ed boards/same54-xpro: add configuration for AT24MAC402 2020-02-13 15:58:43 +01:00
Benjamin Valentin
59ca6a9b37 boards/avr-rss2: add configuration for AT24MAC602 2020-02-13 15:58:43 +01:00
Bas Stottelaar
3141e91380
Merge pull request #13174 from fjmolinas/pr_efm32_cleanup 
cpu/efm32: cleanup
 2020-02-12 22:42:10 +01:00
Dylan Laduranty
a2d63070ae
Merge pull request #13347 from francois-berder/boards-fpu 
boards: Fix presence of FPU
 2020-02-12 09:12:57 +01:00
Bas Stottelaar
d6b478f607
boards/efm32: provide CPU_FAM 2020-02-11 22:46:17 +01:00
Alexandre Abadie
3ac25c3ac9
Merge pull request #12556 from bergzand/wip/stusbdev 
stm32_common: Add USB OTG FS/HS usbdev peripheral driver
 2020-02-11 20:39:46 +01:00
Francois Berder
c76f0e1489 boards: Fix presence of FPU 
Cortex-M0, Cortex-M0+ and Cortex-M3 MCU never have a FPU.

Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-02-11 18:30:29 +00:00
Koen Zandberg
d40ccc2d6f
mulle: Adapt to separate mtd_spi_nor params 2020-02-11 15:55:41 +01:00
Koen Zandberg
1f5340c307
boards/stm32: Add default config for USB OTG HS peripheral 2020-02-11 15:50:22 +01:00
Koen Zandberg
7f1325e48c
pyboard: add usbdev feature 2020-02-11 15:50:22 +01:00
Koen Zandberg
08c74db3d9
stm32f769i-disco: add usbdev feature 2020-02-11 15:50:21 +01:00
Koen Zandberg
033cb5559a
stm32f723e-disco: add usbdev feature 2020-02-11 15:50:21 +01:00
Koen Zandberg
d9837182a0
stm32f4discovery: add usbdev feature 2020-02-11 15:50:21 +01:00
Koen Zandberg
4d0f3d0d3a
stm32f429i-disc1: add usbdev feature 2020-02-11 15:50:20 +01:00
Koen Zandberg
8198c52d17
nucleo-f767zi: add usbdev feature 2020-02-11 15:50:20 +01:00
Koen Zandberg
befac12f9a
nucleo-f746zg: add usbdev feature 2020-02-11 15:50:20 +01:00
Koen Zandberg
dca64d4120
nucleo-f722ze: add usbdev feature 2020-02-11 15:50:20 +01:00
Koen Zandberg
0f885b3789
nucleo-f446ze: add usbdev feature 2020-02-11 15:50:19 +01:00
Koen Zandberg
625698a1d2
nucleo-f429zi: add usbdev feature 2020-02-11 15:50:19 +01:00
Koen Zandberg
2c6f0537df
nucleo-f413zh: add usbdev feature 2020-02-11 15:50:19 +01:00
Koen Zandberg
f37b5d7ec7
nucleo-f412zg: add usbdev feature 2020-02-11 15:50:18 +01:00
Koen Zandberg
3280248e89
nucleo-f207zg: add usbdev feature 2020-02-11 15:50:18 +01:00
Koen Zandberg
fc63fb77bf
boards/stm32: Add default config for USB OTG FS peripheral 2020-02-11 15:50:18 +01:00
benpicco
33291ad675
Merge pull request #13306 from fjmolinas/pr_samr21_use_xosc 
boards/sam[r/d]21-xpro: prefer XOSC32K for RTC/RTT (GCLK2)
 2020-02-11 15:18:36 +01:00
benpicco
d8c050943c
Merge pull request #13327 from maribu/atmega-bootloader 
boards: Cleaned up bootloader selection for ATmega
 2020-02-10 23:18:43 +01:00
benpicco
82134ad77a
Merge pull request #13323 from francois-berder/mbedlpc1768-doc 
boards: mbed_lpc1768: Improve documentation
 2020-02-10 23:07:27 +01:00
Marian Buschsieweke
fec0f8dd48
boards/waspmote-pro: Refactor avrdude conf 2020-02-10 21:48:03 +01:00
Marian Buschsieweke
21b37a3f5e
boards/mega-xplained: Refactor avrdude conf 2020-02-10 21:48:03 +01:00
Marian Buschsieweke
ff53159f0e
boards/atmega256rfr2-xpro: Refactor avrdude conf 
- No longer include `tools/serial.mk` and `tools/avrdude.mk`, as this is
  no done by `boards/common/atmega`
- No longer provide `RESET ?=`, as this is now done in `tools/avrdude.mk` for
  all ATmega boards unless they are using a bootloader
 2020-02-10 21:48:03 +01:00