RIOT/cpu/esp32/Makefile.features

ifeq (esp32,$(CPU_FAM))
  CPU_ARCH = xtensa
  CPU_CORE = xtensa-lx6
else ifneq (,$(filter esp32c3,$(CPU_FAM)))
  CPU_ARCH = rv32
  CPU_CORE = rv32imc
else ifneq (,$(filter esp32s2 esp32s3,$(CPU_FAM)))
  CPU_ARCH = xtensa
  CPU_CORE = xtensa-lx7
else
  $(error Unknown ESP32x SoC variant (family): $(CPU_FAM))
endif

# MCU defined features that are provided independent on board definitions

include $(RIOTCPU)/esp_common/Makefile.features

FEATURES_PROVIDED += arch_esp32
FEATURES_PROVIDED += esp_rmt
FEATURES_PROVIDED += esp_wifi_enterprise
FEATURES_PROVIDED += periph_flashpage
FEATURES_PROVIDED += periph_flashpage_in_address_space
FEATURES_PROVIDED += periph_flashpage_pagewise
FEATURES_PROVIDED += periph_gpio_ll
FEATURES_PROVIDED += periph_gpio_ll_disconnect
FEATURES_PROVIDED += periph_gpio_ll_input_pull_down
FEATURES_PROVIDED += periph_gpio_ll_input_pull_up
FEATURES_PROVIDED += periph_gpio_ll_irq
FEATURES_PROVIDED += periph_gpio_ll_irq_edge_triggered_both
FEATURES_PROVIDED += periph_gpio_ll_irq_level_triggered_high
FEATURES_PROVIDED += periph_gpio_ll_irq_level_triggered_low
FEATURES_PROVIDED += periph_gpio_ll_open_drain
FEATURES_PROVIDED += periph_gpio_ll_open_drain_pull_up
FEATURES_PROVIDED += periph_spi_reconfigure
FEATURES_PROVIDED += puf_sram

ifeq (xtensa,$(CPU_ARCH))
  FEATURES_PROVIDED += esp_hw_counter
endif

ifeq (esp32,$(CPU_FAM))
  FEATURES_PROVIDED += ble_nimble
  FEATURES_PROVIDED += ble_nimble_netif
  FEATURES_PROVIDED += esp_ble
  FEATURES_PROVIDED += esp_ble_esp32
else ifneq (,$(filter esp32c3 esp32s3,$(CPU_FAM)))
  FEATURES_PROVIDED += ble_adv_ext
  FEATURES_PROVIDED += ble_nimble
  FEATURES_PROVIDED += ble_nimble_netif
  FEATURES_PROVIDED += ble_phy_2mbit
  FEATURES_PROVIDED += esp_ble
  FEATURES_PROVIDED += esp_ble_esp32c3
endif

ifneq (,$(filter esp32 esp32s3,$(CPU_FAM)))
  FEATURES_PROVIDED += periph_sdmmc_auto_clk
  FEATURES_PROVIDED += periph_sdmmc_auto_cmd12
  FEATURES_PROVIDED += periph_sdmmc_mmc
  ifeq (esp32s3,$(CPU_FAM))
    FEATURES_PROVIDED += periph_sdmmc_hs
  endif
endif

ifneq (,$(filter esp32-wrover% esp32s2%r2 esp32s3%r2 esp32s3%r8 esp32s3%r8v,$(CPU_MODEL)))
  FEATURES_PROVIDED += esp_spi_ram
  ifneq (,$(filter esp32s3%r8 esp32s3%r8v,$(CPU_MODEL)))
    FEATURES_PROVIDED += esp_spi_oct
  endif
endif
cpu/esp32: add ESP32-S3 support in makefiles 2022-08-09 15:56:39 +02:00			`ifeq (esp32,$(CPU_FAM))`
cpu/esp: move CPU_ definitions to CPU-specific Makefile.features 2022-07-18 08:27:12 +02:00			`CPU_ARCH = xtensa`
			`CPU_CORE = xtensa-lx6`
cpu/esp32: add ESP32-C3 support in makefiles 2022-07-20 17:16:51 +02:00			`else ifneq (,$(filter esp32c3,$(CPU_FAM)))`
			`CPU_ARCH = rv32`
			`CPU_CORE = rv32imc`
cpu/esp32: add ESP32-S2 support in makefiles 2022-08-19 00:40:18 +02:00			`else ifneq (,$(filter esp32s2 esp32s3,$(CPU_FAM)))`
cpu/esp32: add ESP32-S3 support in makefiles 2022-08-09 15:56:39 +02:00			`CPU_ARCH = xtensa`
			`CPU_CORE = xtensa-lx7`
cpu/esp: move CPU_ definitions to CPU-specific Makefile.features 2022-07-18 08:27:12 +02:00			`else`
cpu/esp32: improve build error messages 2024-10-16 16:02:32 +02:00			`$(error Unknown ESP32x SoC variant (family): $(CPU_FAM))`
cpu/esp: move CPU_ definitions to CPU-specific Makefile.features 2022-07-18 08:27:12 +02:00			`endif`

cpu/esp: common Makfile added 2019-12-12 13:46:20 +01:00			`# MCU defined features that are provided independent on board definitions`

			`include $(RIOTCPU)/esp_common/Makefile.features`

cpu: add arch_* features 2018-05-04 15:44:29 +02:00			`FEATURES_PROVIDED += arch_esp32`
cpu/esp32: add RTM feature 2023-03-26 18:30:37 +02:00			`FEATURES_PROVIDED += esp_rmt`
cpu/esp32/esp_wifi: Makefile integration for WPA2 Enterprise mode 2019-08-16 15:47:12 +02:00			`FEATURES_PROVIDED += esp_wifi_enterprise`
cpu/esp32: add flashpage support f 2023-01-07 13:11:31 +01:00			`FEATURES_PROVIDED += periph_flashpage`
			`FEATURES_PROVIDED += periph_flashpage_in_address_space`
			`FEATURES_PROVIDED += periph_flashpage_pagewise`
cpu/esp32: implement periph/gpio_ll 2022-07-27 16:35:52 +02:00			`FEATURES_PROVIDED += periph_gpio_ll`
drivers/periph_gpio_ll: Add features for compile-time-checks This adds the features - periph_gpio_ll_input_pull_down: To indicate support for input mode with internal pull down - periph_gpio_ll_input_pull_keep: To indicate support for input mode with internal resistor pulling towards current level - periph_gpio_ll_input_pull_up: To indicate support for input mode with internal pull up - periph_gpio_ll_disconnect: To indicate a GPIO can be disconnected - periph_gpio_ll_open_drain: To indicate support for open drain mode - periph_gpio_ll_open_drain_pull_up: To indicate support for open drain mode with internal pull up - periph_gpio_ll_open_source: To indicate support for open source mode - periph_gpio_ll_open_source_pull_down: To indicate support for open source mode with internal pull down 2024-01-23 09:05:13 +01:00			`FEATURES_PROVIDED += periph_gpio_ll_disconnect`
			`FEATURES_PROVIDED += periph_gpio_ll_input_pull_down`
			`FEATURES_PROVIDED += periph_gpio_ll_input_pull_up`
cpu/esp32: implement periph/gpio_ll_irq 2022-07-17 14:33:17 +02:00			`FEATURES_PROVIDED += periph_gpio_ll_irq`
drivers/periph_gpio_ll_irq: make support for both edges optional The assumption that every MCU has this feature turned out wrong. Hence, add a feature to allow testing for support of edge triggered IRQs on both flanks. 2024-05-20 10:39:10 +02:00			`FEATURES_PROVIDED += periph_gpio_ll_irq_edge_triggered_both`
cpu/esp32: implement periph/gpio_ll_irq 2022-07-17 14:33:17 +02:00			`FEATURES_PROVIDED += periph_gpio_ll_irq_level_triggered_high`
			`FEATURES_PROVIDED += periph_gpio_ll_irq_level_triggered_low`
drivers/periph_gpio_ll: Add features for compile-time-checks This adds the features - periph_gpio_ll_input_pull_down: To indicate support for input mode with internal pull down - periph_gpio_ll_input_pull_keep: To indicate support for input mode with internal resistor pulling towards current level - periph_gpio_ll_input_pull_up: To indicate support for input mode with internal pull up - periph_gpio_ll_disconnect: To indicate a GPIO can be disconnected - periph_gpio_ll_open_drain: To indicate support for open drain mode - periph_gpio_ll_open_drain_pull_up: To indicate support for open drain mode with internal pull up - periph_gpio_ll_open_source: To indicate support for open source mode - periph_gpio_ll_open_source_pull_down: To indicate support for open source mode with internal pull down 2024-01-23 09:05:13 +01:00			`FEATURES_PROVIDED += periph_gpio_ll_open_drain`
			`FEATURES_PROVIDED += periph_gpio_ll_open_drain_pull_up`
cpu/esp32: implement periph_spi_reconfigure 2022-10-07 18:19:20 +02:00			`FEATURES_PROVIDED += periph_spi_reconfigure`
cpu/esp32: enable puf_sram feature 2022-02-17 11:08:11 +01:00			`FEATURES_PROVIDED += puf_sram`
cpu/esp32: model Kconfig 2021-11-18 17:17:04 +01:00
cpu/esp32: make esp_hw_counter feature dependent on ESP32x SoC family Feature esp_hw_counter is not supported by all ESP32x SoC variants (families). Therefore it has to be defined dependent on defined CPU_FAM. 2022-07-18 13:19:46 +02:00			`ifeq (xtensa,$(CPU_ARCH))`
			`FEATURES_PROVIDED += esp_hw_counter`
			`endif`

cpu/esp32: add BLE support for ESP32 2022-08-11 10:14:56 +02:00			`ifeq (esp32,$(CPU_FAM))`
			`FEATURES_PROVIDED += ble_nimble`
cpu/esp32: add NimBLE support for ESP32 2022-08-11 12:46:41 +02:00			`FEATURES_PROVIDED += ble_nimble_netif`
cpu/esp32: add BLE support for ESP32 2022-08-11 10:14:56 +02:00			`FEATURES_PROVIDED += esp_ble`
			`FEATURES_PROVIDED += esp_ble_esp32`
cpu/esp32: add BLE support for ESP32-S3 2022-08-26 18:23:10 +02:00			`else ifneq (,$(filter esp32c3 esp32s3,$(CPU_FAM)))`
cpu/esp32: add BLE support for ESP32-C3 2022-08-26 17:10:36 +02:00			`FEATURES_PROVIDED += ble_adv_ext`
			`FEATURES_PROVIDED += ble_nimble`
			`FEATURES_PROVIDED += ble_nimble_netif`
			`FEATURES_PROVIDED += ble_phy_2mbit`
			`FEATURES_PROVIDED += esp_ble`
			`FEATURES_PROVIDED += esp_ble_esp32c3`
cpu/esp32: add BLE support for ESP32 2022-08-11 10:14:56 +02:00			`endif`

cpu/esp32: add SDMMC support 2023-06-28 17:31:54 +02:00			`ifneq (,$(filter esp32 esp32s3,$(CPU_FAM)))`
			`FEATURES_PROVIDED += periph_sdmmc_auto_clk`
			`FEATURES_PROVIDED += periph_sdmmc_auto_cmd12`
			`FEATURES_PROVIDED += periph_sdmmc_mmc`
			`ifeq (esp32s3,$(CPU_FAM))`
			`FEATURES_PROVIDED += periph_sdmmc_hs`
			`endif`
			`endif`

cpu/esp32: add ESP32-S2 support in makefiles 2022-08-19 00:40:18 +02:00			`ifneq (,$(filter esp32-wrover% esp32s2%r2 esp32s3%r2 esp32s3%r8 esp32s3%r8v,$(CPU_MODEL)))`
cpu/esp32: refactor esp_spi_ram feature This feature is provided by all esp32_wrover% models, so group it in the common file. 2021-11-30 10:35:16 +01:00			`FEATURES_PROVIDED += esp_spi_ram`
cpu/esp32: add ESP32-S3 support in makefiles 2022-08-09 15:56:39 +02:00			`ifneq (,$(filter esp32s3%r8 esp32s3%r8v,$(CPU_MODEL)))`
			`FEATURES_PROVIDED += esp_spi_oct`
			`endif`
cpu/esp32: refactor esp_spi_ram feature This feature is provided by all esp32_wrover% models, so group it in the common file. 2021-11-30 10:35:16 +01:00			`endif`