Gunar Schorcht 817bb48843 cpu/efm32: fix DAC reference voltage configuration ... The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.		2023-08-15 13:58:39 +02:00
..
adc_series2.c	cpu/efm32/adc: add support for Gecko Series 2	2022-11-22 14:44:56 +01:00
adc_series01.c	cpu/efm32/adc: add support for Gecko Series 2	2022-11-22 14:44:56 +01:00
cpuid.c	cpu: efm32_common + ef32mg1p: replace with generalized efm32 cpu	2017-12-19 20:04:37 +01:00
dac.c	cpu/efm32: fix DAC reference voltage configuration	2023-08-15 13:58:39 +02:00
flashpage.c	efm32: Adapt to flashpage/flashpage_pagewise API	2020-11-11 23:16:39 +01:00
gpio_ll.c	cpu/efm32: Support pull-up/-down resistors	2022-05-03 19:32:08 +02:00
gpio.c	cpu/efm32/gpio: fix clock enable sequence for series 2	2022-10-24 23:16:38 +02:00
hwrng_series1.c	cpu/efm32/hwrng: add series 2 periph driver	2022-10-24 23:16:39 +02:00
hwrng_series2.c	cpu/efm32/hwrng: add series 2 periph driver	2022-10-24 23:16:39 +02:00
i2c.c	cpu/efm32/i2c: add series 2 support	2022-10-24 23:16:39 +02:00
Kconfig	cpu/efm32: enable usbdev_synopsys_dwc2 driver as periph_usbdev	2022-12-07 16:34:34 +01:00
Kconfig.timer	cpu/efm32/Kconfig: add EFM32_XTIMER_USE_LETIMER config	2020-09-02 15:31:28 +02:00
Makefile	cpu/efm32/adc: add support for Gecko Series 2	2022-11-22 14:44:56 +01:00
pm.c	cpu/efm32/pm: add debug output	2022-10-19 18:17:43 +02:00
pwm.c	cpu/efm32: pwm_init errors are zeros	2023-03-17 13:02:20 +01:00
rtc_series0.c	cpu/efm32: RTC Series 0: use RTC helper functions	2020-11-09 17:57:57 +01:00
rtc_series1.c	cpu/efm32/periph/rtc_series1: normalize time	2020-01-22 10:03:49 +01:00
rtt_series0.c	cpu/efm32: add RTT_FREQUENCY support to efm32	2021-04-20 11:12:45 +02:00
rtt_series1.c	cpu/efm32: add RTT_FREQUENCY support to efm32	2021-04-20 11:12:45 +02:00
spi.c	cpu/efm32/spi: add series 2 support	2022-10-24 23:16:39 +02:00
timer_series2.c	cpu/efm32/timer_series2: sync STATUS register	2022-10-28 11:34:55 +02:00
timer_series01.c	cpu/efm32/timer: add series 2 periph driver	2022-10-24 23:16:39 +02:00
uart_series2.c	cpu/efm32/uart: add modecfg support for Gecko Series 2	2022-11-21 23:17:52 +01:00
uart_series01.c	cpu/efm32/uart: add series 2 periph driver	2022-10-24 23:16:38 +02:00
wdt_series0.c	cpu/efm32/periph/wdt: fix compilation with NDEBUG	2021-12-12 13:18:46 +01:00
wdt_series12.c	cpu/efm32/wdt: add series 2 support	2022-10-24 23:16:39 +02:00