Use -misa-spec=2.2 on newer toolchains, which allows passing the same
-march value to both the linker and the compiler even when binutils and
GCC support difference ISA specs.
This is intended for the bootloader module where we don't enter thread
mode, so mutex must never attempt to switch context.
Instead use a simple busy wait that is enough to make the possible mutex
users (e.g. interrupt based SPI) in bootloader mode work.
- move all generated manifests under $(BINDIR)/suit_files (this can be
overwritten.
- rename signed manifests so that they are of the form:
<somename>.<version>.bin, where <somename> is by default riot.suit.
This avoids cluterring BINDIR while as well having a naming scheme that
allows custom names for manifests addresssing different types of
payloads.
- rename riotboot files so that they are of the form: slot<n>.<version>.bin
- move all generated files under $(BINDIR)/riotboot_files (this can be
overwritten.
This adds:
* SUIT_MANIFEST_BASENAME: allow for non slotfiles payloads to have
different names that slotfiles payloads.
* SUIT_MANIFEST_PAYLOADS: firmware payloads to be published with the
manifest.
* SUIT_MANIFEST_SLOTFILES: firmware payloads referenced by the manifest
in the form 'filename:[offset]:[comp_name]' as expected by
gen_manifest.py.
With this the same recipes suit/publish suit/notify can be used with
non slotfiles payloads.
A backward incompatible change in the RISC-V resulting in instructions
previously included by rv32imac to only be available with
rv32imac_zicsr. All RISC-V CPUs supported by RIOT are hence either
considered as rv32imac (from the old ISA spec point of view) or as
rv32imac_zicsr (from the new ISA spec point of view). This adds a
simple test if GCC understands rv32imac_zicsr and uses it then as march,
but uses rv32imac as march if not.
This flag disables all builtin functions provided by the compiler as
well as disabling all optimizations and error checking related to
standard C library functions. If you're using a C library which
conforms to the ANSI C standard, you want to leave these compiler
features enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds a xtimer_no_ztimer_default that is currently always
selected in Makefile, but that can be switched off in Kconfig.
Removing its inclusion will allow switching the default xtimer
backend to ztimer, while allowing for an easy way back.
This PR removes the old xtimer based implementation for sema. Since
this implementation used 64bit timeout, backweard compatibility is
kept by having `sema_wait_timed` be implemented by `ztimer64_usec`
which is enabled by selecting `sema_deprecated`
With this 64bit `sema` api is now deprecated.
- Provide a new tool to list and filter TTYs
- Change `Makefile.include` to use `$(RIOTTOOLS)/usb-serial/ttys.py`
instead of `$(Q)$(RIOTTOOLS)/usb-serial/list-ttys.sh` to implement
`make list-ttys`
- Extend `makefiles/tools/serial.inc.mk` to allow using the most recent
port by passing `MOST_RECENT_PORT=1` as environment variable or
parameter to make
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
The directory `dist/tools/esptool` already contains a couple of ESP tools and not only esptool.py. As the location for a couple of ESP related tools, it is more clear to call it `esptools` instead of `esptool`.
Many simple kconfig configurations are added to boards and brought in with the board name.
This makes a common import of these configs so one only requires adding a BOARD.config without having to alter the makefile.
Some DEFAULT_MODULEs in tree have dependencies of their own. This is
usually done for aliases of init modules, and do not have dependencies
themselves.
This adds the final stage to dependency resolutions where DEFAULT_MODULEs
dependencies MAY be included. These included modules MUST NOT have
dependencies themselves.
This allows for modules to disable DEFAULT_MODULEs during dependencies
resolution independent of the inclusion order.
auto_init and periph_init modules are moved to this outer-loop, allowing
therefore for modules to disable them during the dependency resolution
Add a basic SenML module and submodules with support for:
- Encoding SenML values as CBOR using NanoCBOR.
- Converting from Phydat to SenML.
- Reading and encoding SAUL sensors.
This adds a list of variables that should always be passed to docker
since they are commonly set in Makefile/Makefile.include and therefore
can not be checked for their origin.
Using EXTERNAL_MODULE_PATHS works fine when only using Kconfig for
configuratio, but when using it for dependencies this value is not
set since it depends on Kconfig. Instead use EXTERNAL_MODULE_DIRS
and filter matching on Kconfig files.
Implement a new module stdio_nimble, which uses nimble
for stdio. The characteristic for stdin is writable and
the characteristic for stdout uses the indicate mechanism
to publish the system's output to a connected device.
Data will be sent out asynchronously via callout functions.
The module can be enabled with "USEMODULE += stdio_nimble"
Co-authored-by: Francisco Molina <femolina@uc.cl>
By default if IoT-LAB Cli Tools V3 is used then BINFILE is used to
flash on IoT-LAB. But BINFILE is not built by default when RIOT_CI_BUILD
is set as a ci optimization.
But since before IOTLAB_NODE was not passed to docker when building it
did not know that it should BUILD BINFILE as well, which led to failures
if doing:
$ IOTLAB_NODE=iotlab-m3.grenoble.iot-lab.info BOARD=iotlab-m3 \
RIOT_CI_BUILD=1 BUILD_IN_DOCKER=1 make -C examples/hello-world/ flash
But if IOTLAB_NODE is passed at is checks for IoT-LAB cli Tools also
happen in the docker container which leads to a make error since those
are not present in docker.
Therefore add BINFILE to BUILD_FILES if RIOT_CI_BUILD is set, but unset
IOTLAB_NODE once INSIDE_DOCKER.
The check for `newlib-nano` assumes that a toolchain which provides `newlib-nano` provides both the normal version and the nano version of the `newlib`.The nano version of `newlib.h` is therefore stored in its own include directory. This is the case for toolchains which allow to use both the normal and the nano version, e.g. for ARM and RISC-V.
However, if the toolchain provides `newlib_nano` but only allows the use of the nano version, it will only have the nano version of `newlib.h` and no separate directory for it, e.g. for ESP32.
To still be able to use such toolchains with `newlib_nano`, the check is changed so that the setting of the `-isystem` option depends on the existence of the separate directory.
Without passing this through, any crate downloads would go to the
container's image's scratch space, to be re-downloaded for each build,
and with new time stamps that cause compilation to start anew as well.
