5023 Commits

Author	SHA1	Message	Date
Francisco	4afc04523c	Merge pull request #14490 from yarrick/esp32_eth_kit ... boards: add support for the ESP32-Ethernet-Kit board	2020-12-01 10:09:36 +01:00
Benjamin Valentin	0ed34cdb4d	cpu/stm32: periph_eth: drop addr from eth_conf_t ... MAC address is now supplied by EUI provider, no need to hard-code it for the board.	2020-11-29 23:11:14 +01:00
Erik Ekman	2afa93c9f7	boards/esp32-ethernet-kit: Setup Kconfig to match makefiles	2020-11-28 10:18:54 +01:00
Erik Ekman	064f58e7aa	boards/esp32: add ESP32-Ethernet-Kit v1.2 board	2020-11-28 10:18:54 +01:00
Erik Ekman	f586548d9c	boards/esp32: add ESP32-Ethernet-Kit v1.1 board ... Split docs in v1_0 directory to board common and version specific parts.	2020-11-28 10:18:54 +01:00
Erik Ekman	8e767373fb	boards/esp32-ethernet-kit: add SPI pin config ... For when JTAG is not used.	2020-11-28 10:18:54 +01:00
Erik Ekman	db91be6ef8	cpu/esp32: add esp_jtag pseudomodule and feature ... Available on esp32-wrover-kit and esp32-ethernet-kit boards.	2020-11-28 10:18:54 +01:00
Erik Ekman	d9c40ba47a	boards/esp32: fix spelling of periph_i2c ... Also change to single quotes for inline verbatim.	2020-11-28 10:18:54 +01:00
Erik Ekman	b3197dea28	boards/esp32-ethernet-kit: add button definition ... Conflicts with Ethernet phy clock input. Tested with tests/saul: Dev: BOOT Type: SENSE_BTN Data: 0 Dev: BOOT Type: SENSE_BTN Data: 1 and tests/buttons: On-board button test -- Available buttons: 1 -- Try pressing buttons to test. [SUCCESS] Pressed BTN0 Pressed BTN0 Pressed BTN0	2020-11-28 10:18:54 +01:00
Erik Ekman	e3142c39f0	boards/esp32: add ESP32-Ethernet-Kit board ... Mostly copied from esp32-wroom-kit and Ethernet part from esp32-olimex-evb. Ethernet and serial port has been tested (on v1.2 board).	2020-11-28 10:18:54 +01:00
Francisco	7237e38436	Merge pull request #15501 from aabadie/pr/boards/renode_hifive ... boards/hifive*: add renode support	2020-11-27 10:09:10 +01:00
Alexandre Abadie	f1a20d9a78	Merge pull request #13177 from aabadie/pr/boards/arduino-ble-iot ... boards/arduino-nano-33-iot: add initial support	2020-11-27 10:03:46 +01:00
Francisco	a618067a76	Merge pull request #15489 from aabadie/pr/boards/renode_firefly ... boards/firefly: add renode configuration	2020-11-27 09:21:01 +01:00
Alexandre Abadie	dfff56801c	boards/arduino-nano-33-iot: add initial support	2020-11-27 08:45:07 +01:00
Francisco	47ed64fcfd	Merge pull request #15466 from leandrolanzieri/pr/kconfig_drivers_bc ... drivers/{b,c}*: model modules in Kconfig	2020-11-26 10:44:28 +01:00
Alexandre Abadie	c6ad85a7b0	boards: don't include programmer logic at board level	2020-11-25 22:31:13 +01:00
Leandro Lanzieri	2407c18890	drivers/saul: add modules to Kconfig	2020-11-25 12:00:13 +01:00
Alexandre Abadie	13d149fe09	boards/hifive1*: add renode configuration	2020-11-25 09:07:18 +01:00
Alexandre Abadie	cfb771dcac	boards/firefly: add renode configuration	2020-11-25 09:05:43 +01:00
benpicco	638cb00a28	Merge pull request #15486 from aabadie/pr/make/emulator_enh ... make: handle emulator backend in Makefile.include	2020-11-25 00:31:19 +01:00
Bas Stottelaar	57ffd66605	boards/e180-zg120b-tb: add initial support	2020-11-23 00:36:20 +01:00
Alexandre Abadie	ba8825928e	boards/microbit: use qemu as default emulator	2020-11-20 14:24:06 +01:00
Alexandre Abadie	85765e1e33	boards/cc2538dk: remove useless include of renode	2020-11-20 14:24:05 +01:00
Alexandre Abadie	8560d13410	boards/microbit: use common qemu include	2020-11-20 14:18:18 +01:00
Bas Stottelaar	e438e9afde	boards/efm32: provide efm32_coretemp feature	2020-11-18 17:27:17 +01:00
Bas Stottelaar	34c252d0e6	Merge pull request #15461 from basilfx/feature/efm32_driver_coretemp ... cpu/efm32: add coretemp driver	2020-11-18 15:08:29 +01:00
Bas Stottelaar	e1b356e884	boards/efm32: enable efm32_coretemp driver	2020-11-18 12:28:45 +01:00
Leandro Lanzieri	8b0e0d2f52	boards/native: add native_drivers module to Kconfig	2020-11-18 10:07:58 +01:00
Leandro Lanzieri	402efc4750	boards/native: rename native-drivers module to native_drivers	2020-11-18 10:07:58 +01:00
Leandro Lanzieri	5a04f94b63	Merge pull request #14967 from aabadie/pr/boards/stm32f0_clock_kconfig_only ... boards/stm32f0: add Kconfig for clock configuration	2020-11-17 12:14:10 +01:00
benpicco	be9eb22bb8	Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds ... saul_pwm: auto-init'able RGB LEDs and dimmers	2020-11-13 18:22:30 +01:00
Alexandre Abadie	f626758aaf	Merge pull request #15392 from fjmolinas/pr_cc2538_riotboot ... boards/cc2538: add riotboot feature	2020-11-13 15:39:55 +01:00
Francisco Molina	8598176544	boards: add riotboot to cc2538 based boards	2020-11-13 14:51:58 +01:00
Alexandre Abadie	57116e737b	Merge pull request #14691 from gdoffe/mp1_dev ... Port of RIOT-OS to stm32mp1	2020-11-13 12:34:19 +01:00
Alexandre Abadie	eaf410592b	Merge pull request #15428 from btcven/2020_11_11-lvgl-preemption ... pkg/lvgl: set LVGL thread priority higher than main	2020-11-13 11:58:06 +01:00
Gilles DOFFE	6d6fd5a975	boards: add stm32mp157c-dk2 initial support ... This board is based on a stm32mp157cac which has a dual architecture: * Dual core Cortex-A7 * Cortex-M4 Only Cortex-M4 is supported by RIOT-OS. Cortex-M4 can be used in Engineering mode if stm32mp1_eng_mode pseudomodule is used. By default the RIOT firmware can be loaded by Linux on the Cortex-M4 using remoteproc Linux framework. This the initial commit with a limited set of supported peripheral: * gpio * timer * uart Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>	2020-11-13 10:43:08 +01:00
Gilles DOFFE	58f90c986f	boards/common/stm32: add openocd config stm32mp1.cfg ... Add common openocd configuration for stm32mp1 boards. Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>	2020-11-13 10:43:08 +01:00
Gilles DOFFE	2ac0467807	cpu/stm32: configure timer2 for stm32mp1 boards ... This timer will be used by RIOT-OS as the scheduling timer for stm32mp157c-dk2 board. Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>	2020-11-13 10:43:08 +01:00
Leandro Lanzieri	d4be753df8	cpu/native: remove unused can_linux module ... b4f29035ce adapted the can_linux module to the periph_can interface. This is a cleanup of some things that stayed behind. Here the makefile is removed, the references to can_linux in the dependency resolution and configuration Makefile are changed to the standard periph_can, and the startup code is adapted.	2020-11-13 09:11:50 +01:00
Alexandre Abadie	153c52754d	Merge pull request #15070 from fjmolinas/pr_uwb_core ... pkg/uwb_core: initial support	2020-11-12 14:04:51 +01:00
Benjamin Valentin	d12a9dbf13	boards/saml21-xpro: add gpio_params.h ... We can now enable `saul_gpio`.	2020-11-11 17:40:09 +01:00
Jean Pierre Dudey	aa97387b85	boards/esp32-wrover-kit: don't invert & use RGB for ILI9341 ... Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>	2020-11-11 09:50:42 +01:00
benpicco	808c5b7eb8	Merge pull request #15424 from basilfx/feature/efm32_fix_timers ... boards/efm32: update channel_numof with correct values	2020-11-11 09:49:24 +01:00
Bas Stottelaar	67e7a14e6c	boards/efm32: update channel_numof ... The number of channels per timer got updated incorrectly in #15368. Only TIMER1 and higher have four channels. Without this fix, timer initialization will halt.	2020-11-11 00:26:52 +01:00
Bas Stottelaar	cc9586f163	boards/common/silabs: define CPU=efm32	2020-11-11 00:24:53 +01:00
Bas Stottelaar	cd6d479eb5	boards/slwstk6220a: add support	2020-11-10 22:59:46 +01:00
Alexandre Abadie	c4269ffefc	boards/nucleo-f0*: remove custom pll prediv/mul defines	2020-11-10 15:55:38 +01:00
Alexandre Abadie	6e9a433c9a	boards/stm32f0*: adapt Kconfig for clock configuration	2020-11-10 14:53:14 +01:00
Leandro Lanzieri	95ff222316	Merge pull request #14968 from aabadie/pr/boards/stm32l4wb_clock_kconfig_only ... boards/stm32l4/wb: add Kconfig for clock configuration	2020-11-10 10:51:54 +01:00
Alexandre Abadie	6c39bc5101	boards/nucleo-l552ze-q: remove PLL N custom define	2020-11-10 09:34:07 +01:00