32297a9818
fe310: Remove timer initialization from IRQ code
...
The RISC-V timer should only be touched by periph/timer and must not be
initialized and enabled by the IRQ code. The current code can cause an
unhandled interrupt when the timer is not used and the mtime register
hits UINT64_MAX.
2020-08-26 10:33:22 +02:00
benpicco
a0bae383d7
Merge pull request #14818 from Nishchay-sopho/drivers/sps30/add_sleep_mode
...
drivers/sps30: Add sleep mode
2020-08-25 23:49:32 +02:00
Benjamin Valentin
d5690ee4cd
boards/e104-bt5010a-tb: add support for the E104-BT5010A Test Board
...
This adds support for the nRF52810 based E104-BT5010A break-out board.
2020-08-25 22:51:10 +02:00
Martine S. Lenders
1ecc3ab014
gh-actions: initial import of a label-checker workflow
...
This adds a label checker that checks if certain labels are set, not set
or if some are set, enough reviews were provided.
2020-08-25 21:04:50 +02:00
benpicco
2eb6d752df
Merge pull request #14770 from benpicco/netif_addr_to_str
...
net/netif: move gnrc_netif_addr_to/from_str() to netif
2020-08-25 18:52:55 +02:00
Benjamin Valentin
d2f740829d
tests/netif: add tests for common netif functions
2020-08-25 17:42:25 +02:00
hugues
629a5af8ed
cpu/stm32/periph/adc_f0: remove unused MAX_ADC_SPEED
2020-08-25 17:16:49 +02:00
hugues
205ae92b84
cpu/stm32/periph/adc_l0: remove unused MAX_ADC_SPEED
2020-08-25 17:15:39 +02:00
hugues
c519149979
cpu/stm32/periph/adc_l1: remove unused MAX_ADC_SPEED
2020-08-25 17:14:55 +02:00
Leandro Lanzieri
bbfca7e1ef
Merge pull request #14458 from miri64/vagrant/enh/freebsd
...
vagrant: add Vagrantfile to test native in FreeBSD
2020-08-25 16:32:05 +02:00
Nishchay-sopho
a368b0bc36
drivers/sps30: Add sleep mode
2020-08-25 16:20:18 +02:00
Martine Lenders
ec3464aaeb
Merge pull request #14788 from leandrolanzieri/pr/fuzzing/select_gnrc_pktbuf_malloc
...
fuzzing: select gnrc_pktbuf_malloc implementation
2020-08-25 16:05:46 +02:00
Martine S. Lenders
1d435de445
buildsystem_sanity_check: whitelist Vagrantfiles
...
Vagrantfiles are not part of our build-system so they should be ignored
by its sanity check.
2020-08-25 16:01:59 +02:00
Martine S. Lenders
f9e3c0f513
vagrant: add Vagrantfile to test native in FreeBSD
2020-08-25 16:00:59 +02:00
9f28e1deee
Merge pull request #12451 from benpicco/native-gpio
...
cpu/native: Allow Access to Hardware GPIO Pins on Linux
2020-08-25 15:30:08 +02:00
5226789f70
Merge pull request #14842 from benpicco/picolibc_multiheap
...
picolibc: enable multiple heaps
2020-08-25 14:42:18 +02:00
Benjamin Valentin
7e479070fa
tests/driver_at86rf2xx_aes: silence warning on native
2020-08-25 14:07:13 +02:00
Benjamin Valentin
2aa2bf86a3
drivers/at86rf2xx: AES: don't use binary constant
...
This is a GCC extension. Use hex constant instead.
2020-08-25 14:06:40 +02:00
dd45eaa472
sched: simplify MODULE_CORE_IDLE_THREAD conditional
2020-08-25 14:00:01 +02:00
764b3102e4
sched: Early exit when scheduling same thread after sleep
2020-08-25 13:59:58 +02:00
Benjamin Valentin
d2e0af2941
cpu/native: gpio: provide dummy implementations for GPIO IRQ
2020-08-25 13:53:14 +02:00
Benjamin Valentin
39b41d62cd
cpu/native: allow to disable native periph implementations
2020-08-25 13:53:14 +02:00
Frank Hessel
4275b36cdb
cpu/native: Adapt HW SPI for HW GPIO support
2020-08-25 13:53:14 +02:00
Benjamin Valentin
ea25e8580c
cpu/native: add Linux GPIO implementation
2020-08-25 13:53:14 +02:00
Leandro Lanzieri
8b00d14014
Merge pull request #14837 from aabadie/pr/boards/stm32gx_clock_kconfig
...
cpu: boards: stm32gx: improve and add Kconfig clock configuration
2020-08-25 13:33:31 +02:00
9b2aa40e03
Merge pull request #14038 from benpicco/mtd_pagewise
...
mtd: add page addressed operations to allow access > 4GiB on SD cards
2020-08-25 13:10:20 +02:00
d05f614d64
Merge pull request #14146 from fjmolinas/pr_rtt_min_value_test
...
tests/periph_rtt_min: add test to figure out RTT_MIN_OFFSET
2020-08-25 13:09:36 +02:00
bc2c700ab0
boards/nucleo-g474re: add Kconfig board clock configuration
2020-08-25 12:57:04 +02:00
7effbe8773
boards/nucleo-g070rb: add Kconfig board clock configuration
2020-08-25 12:57:03 +02:00
7472280369
boards/stm32g0: add clock configuration via Kconfig
2020-08-25 12:57:03 +02:00
f9fa90fcd8
boards/stm32g4: add clock configuration via Kconfig
2020-08-25 12:57:03 +02:00
a1038aa70e
cpu: boards: stm32g4: improve clock configuration
2020-08-25 12:55:16 +02:00
a7f9b4d793
Merge pull request #14836 from aabadie/pr/cpu/stm32g4_full_speed
...
cpu/stm32g4: add transition phase when raising +80MHz clock
2020-08-25 10:02:13 +02:00
Leandro Lanzieri
ff8079b109
fuzzing: select gnrc_pktbuf_malloc implementation
2020-08-25 09:24:50 +02:00
Benjamin Valentin
178167621b
cpu/lpc2387: timer: use bitarithm_test_and_clear()
2020-08-25 09:19:27 +02:00
Benjamin Valentin
8126651009
cpu/lpc2387: timer: implement timer_set()
...
We can achieve greater accuracy for the relative timer_set()
if we don't use the generic implementation.
Use the same approach as used by atmega_common to trigger interrupts
for too small offsets.
tests/periph_timer_short_relative_set should now succeed for all intervals.
2020-08-25 09:19:27 +02:00
benpicco
4d164ee299
Merge pull request #14839 from MrKevinWeiss/pr/revert/cc2538/renode
...
board/cc2538dk: Restore renode config
2020-08-25 07:30:22 +02:00
Benjamin Valentin
28d40eae6f
picolibc: enable multiple heaps
...
We can simply re-use the same code from newlib.
2020-08-24 20:45:05 +02:00
Marian Buschsieweke
3b6fa61829
sys: Cleanup access to internal variables
...
Replace direct accesses to sched_active_thread and sched_active_pid with
the helper functions thread_getpid() and thread_get_active(). This serves
two purposes:
1. It makes accidental writes to those variable from outside core less likely.
2. Casting off the volatile qualifier is now well contained to those two
functions
2020-08-24 20:28:11 +02:00
Martine Lenders
e84eda5796
Merge pull request #14833 from maribu/tests-cleanup
...
tests: Cleanup access to internal variables
2020-08-24 19:33:40 +02:00
Martine Lenders
b9bce7030b
Merge pull request #14838 from haukepetersen/fix_rpl_dfltroutelifetime
...
net/gnrc/rpl: fix default route lifetime
2020-08-24 19:16:23 +02:00
Benjamin Valentin
ea27064d21
picolibc: make stdout buffering optional
2020-08-24 18:49:36 +02:00
Leandro Lanzieri
53187c5ef7
Merge pull request #14782 from benpicco/cpu/sam0_common-full
...
cpu/sam0_common: add all parts to Kconfig
2020-08-24 18:38:11 +02:00
Benjamin Valentin
727e9240eb
cpu/arm7_common: enable support for picolibc
2020-08-24 18:08:08 +02:00
Benjamin Valentin
af57b156c3
cpu/lpc23xx: add support for thread-local storage
2020-08-24 18:08:08 +02:00
benpicco
f3e1032f6e
Merge pull request #14827 from keith-packard/pr/libc/picolibc
...
Pr/libc/picolibc
2020-08-24 18:06:56 +02:00
Hauke Petersen
d8aa76501a
net/gnrc/rpl: fix default route lifetime
...
On receiving a DIO message, RPL sets the lifetime for the default
route and the parent timeout event to the value. This leads to short
amounts of time whem the node looses its default route, while it
handles the parent timeout event to probe its parent.
This commit fixes this by adding time the node needs for probing
to the default route lifetime.
2020-08-24 17:53:00 +02:00
MrKevinWeiss
50874c53fb
board/cc2538dk: Restore renode config
2020-08-24 17:48:29 +02:00
Keith Packard
fda68c4149
picolibc: Add stdout buffering [v2]
...
Add buffering so that USB back-ends get some batching for stdout
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
Replace tabs with spaces.
2020-08-24 08:26:41 -07:00
Keith Packard
8c67544e7d
picolibc: USE_MODULE += printf_float for float printf/scanf code [v2]
...
This makes RIOT use the integer-only printf/scanf code by default and
includes a new make parameter to select the full floating point
version. This saves about 6kB of text space when building hello-world
for the microbit board.
Signed-off-by: Keith Packard <keithp@keithp.com>
----
v2:
Use USEMODULE=printf_float instead of separate parameter
2020-08-24 08:26:16 -07:00
