4fb244d415
boards/common: fix typos
2019-11-23 22:39:07 +01:00
Gunar Schorcht
a05027cdba
Merge pull request #12523 from aabadie/pr/sys/arduino_pwm
...
sys/arduino: add implementation for analogWrite
2019-11-21 15:08:10 +01:00
4337cb316f
Merge pull request #12752 from gschorcht/cpu/esp32/espreset
...
boards/esp32*: use espreset tool for reset in make test
2019-11-20 22:07:15 +01:00
Gunar Schorcht
5ba4a7d7cf
boards/esp32*: espreset tool added
2019-11-20 08:33:47 +01:00
benpicco
1999e2f89c
Merge pull request #12745 from benpicco/atmega-led_fix
...
boards/atmega_common: remove weak led_init()
2019-11-20 00:14:48 +01:00
benpicco
cfcbb76cd2
Merge pull request #12729 from maribu/atmega1284p
...
boards/atmega1284p: Add ATmega1284P as board
2019-11-19 23:18:31 +01:00
Hauke Petersen
04dcc3662b
Merge pull request #12344 from chrysn-pull-requests/particle-antenna-switch
...
particle-*: Configure antenna switch
2019-11-19 23:06:29 +01:00
Benjamin Valentin
c277100dd9
boards/atmega_common: remove weak led_init()
...
`led_init()` is already protected by an `#ifdef`, so no need for
the weak symbol.
The problem is that the weak function does not get overridden, even when
the board provides it's own led_init(), resulting in no LEDs being
initialized.
2019-11-19 22:36:07 +01:00
Marian Buschsieweke
b7150ed6c7
boards/common/atmega: Added ATmega1284P PWM conf
...
Added PWM configuration for the ATmega1284P CPU; this can be reused for every
board featuring that CPU.
2019-11-18 23:46:08 +01:00
chrysn
9954194ae0
particle boards: Make default antenna selection configurable
...
The setter function approach makes this switchable at runtime (antenna
diversity?).
Documentation is added both to the board introduction page and the
individual pins and functions.
2019-11-18 13:54:39 +01:00
chrysn
951f7dec2c
particle-*: Configure antenna switch
...
The particle-{argon,boron,xenon} all have a uFL connector and a PCB
antenna for 2.4GHz radio, connected by a SKY13351-378LF switch
configured by a VCTL[12] pin pair.
This sets the default configuration to use the PCB antenna, as driving
an unconnected antenna will deteriorate radio performance.
2019-11-18 13:54:22 +01:00
Kevin "Tristate Tom" Weiss
be39169bd4
Merge pull request #11108 from gschorcht/cpu/esp8266/esp-idf/pr
...
cpu/esp8266: complete reimplementation based on ESP8266 RTOS SDK
2019-11-18 09:34:49 +01:00
Benjamin Valentin
60686c96dc
boards/common: clean up msba2 common files
...
The 'msba2' common files have accumulated many empty files are files that
do nothing.
This makes reasoning about the boards needlessly difficult.
Trim down on `common/msba2/` so that it now only contains the setup for the
UART/bootloader based flashing.
This should eventuelly be moved to `makefiles/tools/`
2019-11-16 11:57:15 +01:00
65e0247a9b
boards/arduino-atmega: add mapping for Arduino PWM pins
2019-11-15 17:54:30 +01:00
d03c982ddb
boards/arduino-mkr: add mapping for Arduino PWM pins
2019-11-15 17:51:45 +01:00
Gunar Schorcht
555a7040db
cpu/esp8266: reset tool to allow automatic tests
2019-11-14 13:58:48 +01:00
Gunar Schorcht
e5b7645b0b
boards/esp32: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Gunar Schorcht
7d9a3a79a2
boards/esp8266: changes for RTOS SDK
2019-11-14 13:58:25 +01:00
Hauke Petersen
4bf14822cb
nrf5x: move nimble_ble feat. to cpu
2019-11-13 13:43:55 +01:00
Benjamin Valentin
0ea2cbf1eb
boards: remove RTT_NUMOF/RTC_NUMOF
...
Those macros are defined but never used.
2019-11-08 14:20:33 +01:00
Francisco Molina
1ae0873769
boards: change PORT used for flash/debug/reset to PROG_DEV
2019-10-24 12:58:12 +02:00
Francisco Molina
755b4d97da
boards/(openmote-b/remote): migrate PORT_BSL to PROG_DEV
...
- Move serial.inc.mk in remote and openmote-b Makefile.include before
PROG_DEV to avoid repeating OS logic check
- Add deprecation warning for PORT_BSL
2019-10-24 12:57:46 +02:00
f84cdc4044
boards/sodaq: restore accidentally removed arduino feature
2019-10-22 19:06:16 +02:00
26c0b812d2
Merge pull request #12531 from fjmolinas/pr_nrf52_nimble
...
common/nrf52840/Makefile.dep: nrf802154 if no nimble_%
2019-10-22 15:14:54 +02:00
benpicco
d49c48368a
Merge pull request #12438 from aabadie/pr/boards/sodaq_factorize
...
boards/sodaq: factorize common code
2019-10-21 17:04:20 +02:00
Francisco Molina
c04a2cf3a3
common/nrf52840/Makefile.dep: nrf802154 if no nimble_%
2019-10-21 16:52:18 +02:00
benpicco
ca7e82c312
Merge pull request #11090 from maribu/atmega328p
...
boards: Added standalone ATmega328p
2019-10-21 13:38:58 +02:00
4b06a11b93
Merge pull request #12470 from aabadie/pr/boards/kw41z_openocd
...
boards/frdm: update openocd version requirements
2019-10-21 13:30:54 +02:00
Marian Buschsieweke
f9c2f26dd0
boards: Added standalone ATmega328p
2019-10-21 12:54:46 +02:00
f9631953cb
boards: add common sodaq module
2019-10-21 08:33:11 +02:00
14567ea973
Merge pull request #12494 from fjmolinas/pr_remove_OS
...
Makefile/include: use ony one call to `uname`
2019-10-18 15:03:10 +02:00
benpicco
29e5c3af67
Merge pull request #12490 from aabadie/pr/boards/efm32_common_periph_gpio
...
boards/efm32: move provided gpio features at cpu level
2019-10-18 11:19:33 +02:00
benpicco
34ee36d9e4
Merge pull request #12491 from aabadie/pr/boards/atmega_common_periph_gpio
...
boards/atmega: move provided gpio features at cpu level
2019-10-18 11:19:15 +02:00
aed0cfb1d8
boards/efm32: remove useless provided gpio features
...
These features are provided at CPU level
2019-10-18 09:33:54 +02:00
Francisco Molina
c010f59b8c
Makefile.include: remove repeated OS declaration
...
- OS := $(shell uname) is already declared in `Makefile.include`
re-declaring it means it will be re-evalauted multiple times
uselessly.
2019-10-18 08:46:51 +02:00
Francisco
01779508d6
Merge pull request #12394 from aabadie/pr/make/iotlab_support_fix
...
make/testbed-support: fix error with FLASHFILE not defined
2019-10-17 23:21:12 +02:00
27f2a19f72
boards/atmega: remove useless provided gpio features
...
These features are provided at CPU level
2019-10-17 21:42:49 +02:00
Benjamin Valentin
7d78e32b15
cpu/atmega128rfa1: ATmega128rfa1 MCU support
2019-10-17 19:20:31 +02:00
Benjamin Valentin
6617c5c768
cpu/atmega_common: provide dummy implementation for led_init()
2019-10-17 19:20:31 +02:00
4c794c1122
boards/frdm: document more the OpenOCD version requirement
...
Add the need to have a built from source version of OpenOCD for kw41z and give the url of the commit adding the change in OpenOCD
2019-10-16 14:53:42 +02:00
f81baf2bf6
boards/frdm: remove OpenOCD < 0.10 specific code
...
OpenOCD 0.10 is out from early 2017, all stable Linux distros provide this version now.
2019-10-16 14:51:53 +02:00
ffc4c84faa
dist/testbed-support: boards: remove useless IOTLAB_FLASHFILE
2019-10-16 11:44:59 +02:00
66b57f2a51
boards/stm32: add 54MHz and 108MHz divtable entries
2019-10-13 20:27:37 +02:00
Gaëtan Harter
7ac30e471c
boards/slwstk6000b-*: move CPU_MODEL definition to Makefile.features
...
This is still currently a hack to hardcode it as the value can be deduced
from the `BOARD_MODULE` daughter board name.
But it requires more cleanup and could come in a separate step.
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-10-09 18:51:57 +02:00
Gaëtan Harter
ec93d4c1c4
boards/common/arduino-atmega: remove special case for jiminy-mega256rfr2
...
The board is deprecated, no need to ignore this board anymore here.
Having the `arduino` and `periph_pwm` features is now required for all
boards using 'arduino-atmega' (as it was except for that board).
If this should change in the future, it should be defined either in each
arduino board, in another board common, or per CPU_MODEL.
2019-10-08 18:37:32 +02:00
Gaëtan Harter
ddf3874995
boards/slwstk6000b: migrate to use a common/slwstk6000b
...
Migrate the board to be implemented with a common/slwstk6000b.
It is a pre step for splitting the board for each "BOARD_MODULE".
2019-10-08 15:36:09 +02:00
86360f73d4
boards/nucleo32: fix arduino pinmap for nucleo-l432kc
2019-10-07 14:30:36 +02:00
Kees Bakker
04c84ed158
cpu/sam0: refactor ADC_0 into plain ADC
...
This change is for all boards with a sam0 cpu. This cpu just has one ADC.
It is unnecessary to have defines with ADC_0_ prefix as if multiple ADCs
are possible.
Some defines were not used, such as ADC_0_EN, ADC_0_CHANNELS,
ADC_MAX_CHANNELS, ADC_0_CLK_SOURCE, ADC_0_CHANNELS
Change all ADC_0_ prefixes to ADC_
2019-10-03 20:45:44 +02:00
49967b2c4a
boards/avr/dist: setsid can be set with env variable
2019-10-03 12:43:49 +02:00
f7763438a9
boards/common/arduino-mkr: use common LED0_NAME definition
2019-10-03 09:24:20 +02:00
