C has this feature that the order of struct members in the
initialization doesn't need to match the order in the declaration.
C++ has not yet caught up:
boards/common/gd32v/include/cfg_usbdev_default.h:50:1: error: designator order for field 'dwc2_usb_otg_fshs_config_t::type' does not match declaration order in 'const dwc2_usb_otg_fshs_config_t'
So, just reorder the fields for now by hand.
This commit includes the following cleanups:
- The macros `I2C_DEV_1_USED` and `SPI_DEV_1_USED` are now used with the values 0 and 1. This allows to enable but also to disable the second interface even if the board definition enables it by default.
- The second I2C device `I2C_DEV(1)` and the second SPI device `SPI_DEV(1)` are now disabled by default.
- The second SPI device `SPI_DEV(1)` now uses PB5 as default CS signal instead of PA4 to keep PA4 free for ADC or DAC even if `SPI_DEV(1)` is used, for example for the TFT display.
19256: pkg/tinyusb: add GD32VF103 support r=gschorcht a=gschorcht
### Contribution description
This PR provides the tinyUSB support for GD32VF103 and enables the `tinyusb_device` feature as well as `stdio_tinyusb_cdc_acm` for GD32VF103 boards.
### Testing procedure
```
BOARD=sipeeed-longan-nano make -C tests/shell flash term
```
should work
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The default SPI device configuration allows to define up to two SPI devices `SPI_DEV(0)` and `SPI_DEV(1)`. `SPI_DEV(0)` is always defined if the SPI peripheral is enabled by the module `periph_spi`. The second SPI device `SPI_DEV(1)` is only defined if `SPI_DEV_1_USED` is defined by the board. This allows to use the default configuration with one or two SPI devices depending on whether other peripherals are enabled that would collide with the SPI devices.
Furthermore, the CS signal in the SPI configuration is given by a define that can be overriden with another pin if
the default CS signal is connected to an unused hardware.
The default I2C device configuration allows to define up to two I2C devices `I2C_DEV(0)` and `I2C_DEV(1)`. `I2C_DEV(0)` is always defined if the I2C peripheral is enabled by the module `periph_spi`. The second I2C device `I2C_DEV(1)` is only defined if `I2C_DEV_1_USED` is defined by the board. This allows to use the default configuration with one or two I2C devices depending on whether other peripherals are enabled that would collide with the I2C devices.
16782: drivers/mfrc522: add new driver r=benpicco a=HendrikVE
### Contribution description
This PR adds support for the MFRC522. It is quite common in the Arduino world and it is quite cheap. The driver connects to the MFRC522 via SPI and is heavily based on the Arduino driver available [here](https://github.com/miguelbalboa/rfid). Basically it was ported, but with several improvements in readability and documentation.
### Testing procedure
The given (manual) test provides single commands for some driver functions.
19201: cpu/gd32v: add periph_i2c support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_i2c` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V. As for STM32F1, the driver is using polling instead of interrupts for now. It will be implemented interrupt-driven later.
### Testing procedure
`tests/periph_i2c` as well as a test with any I2C sensor should work. The driver was tested with `tests/driver_l3gxxxx` and `tests/driver_bmp180`.
### Issues/PRs references
Co-authored-by: Hendrik van Essen <hendrik.ve@fu-berlin.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The default timer configuration has been changed so that `TIMER0` and `TIMER1` are always timer devices. `TIMER2` can only be used as timer device if it is not used for PWM devices. `TIMER3` and `TIMER4` are only available as timer devices if they are supported by the CPU model and not used for PWM devices.
19199: sys/suit: Ensure previous thread is stopped before reusing its stack r=benpicco a=chrysn
### Contribution description
Closes: https://github.com/RIOT-OS/RIOT/issues/19195
If the thread has released the mutex but the thread has not terminated (which happens in the situation that would previously have overwritten a still active thread's state), then a warning is shown and the trigger is ignored.
### Testing procedure
This should work before and after:
* `make -C examples/suit_update BOARD=native all term`
* `aiocoap-client coap://'[fe80::3c63:beff:fe85:ca96%tapbr0]'/suit/trigger -m POST --payload 'coap://[2001:db8::]/foo'`
* In parallel, on the RIOT shell, run `suit fetch coap://[2001:db8::]/foo`
* After the first download fails, the second one starts right away ("suit_worker: update failed, hdr invalid" / "suit_worker: started").
Run again with the worker thread on low priority:
```patch
diff --git a/sys/suit/transport/worker.c b/sys/suit/transport/worker.c
index a54022fb28..e26701a64c 100644
--- a/sys/suit/transport/worker.c
+++ b/sys/suit/transport/worker.c
`@@` -70 +70 `@@`
-#define SUIT_COAP_WORKER_PRIO THREAD_PRIORITY_MAIN - 1
+#define SUIT_COAP_WORKER_PRIO THREAD_PRIORITY_MAIN + 1
```
Before, this runs the download once silently (no clue why it doesn't run it twice, but then again, I claim there's concurrent memory access from two thread, so who knows what happens). After, it runs a single download and shows an error message for the second one once the first is complete ("Ignoring SUIT trigger: worker is still busy.").
### Issues/PRs references
This may be made incrementally easier by https://github.com/RIOT-OS/RIOT/pull/19197 -- that PR as it is now would spare us the zombification (because returning would do that), and having a `wait` function would allow us to turn the new error case into a success.
19205: boards/common: add common timer config for GD32VF103 boards r=benpicco a=benpicco
19207: examples/gnrc_border_router: static: use router from advertisements by default r=benpicco a=benpicco
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
