benpicco
f3dddd6127
Merge pull request #14068 from miri64/sock_util/enh/netif-str2ep
...
sock_util: add interface descriptor parsing to str2ep
2020-05-19 23:59:32 +02:00
cf6ab10abc
Merge pull request #13861 from maribu/nucleo-f767-spi
...
boards/nucleo-f767zi: Fix SPI config
2020-05-19 21:00:11 +02:00
Marian Buschsieweke
f56a0a5128
boards/nucleo-f767zi: Remap MOSI of SPI1 when used with stm32_eth
...
PA7 is the default MOSI pin, as it is required for compatibility with
Arduino(ish) shields. Sadly, it is also connected to the RMII_DV of
Ethernet PHY. This commit works around this by remapping the MOSI to PB5 when
the on-board Ethernet PHY is used.
2020-05-19 20:30:24 +02:00
Leandro Lanzieri
391f49fade
Merge pull request #14047 from benpicco/drivers/mrf24j40-turbo
...
drivers/mrf24j40: add Turbo Mode
2020-05-19 18:00:05 +02:00
Leandro Lanzieri
7032984a81
Merge pull request #14101 from benpicco/ieee802154-oqpsk_high_rate
...
net/netopt: clarify documentation of NETOPT_OQPSK_RATE
2020-05-19 16:46:22 +02:00
Benjamin Valentin
d8efcca81e
net/netopt: clarify documentation of NETOPT_OQPSK_RATE
...
802.15.4 only specifies one rate of 250 kbit/s for O-QPSK.
Everything else is a proprietary extension.
2020-05-19 16:39:15 +02:00
benpicco
fbad1dff01
Merge pull request #14087 from bergzand/pr/tests/periph_spi/add_thread_time
...
tests/periph_spi: Add thread runtime stats
2020-05-19 16:37:54 +02:00
73fe9b9ed8
Merge pull request #13160 from bergzand/pr/filesystems/newline_after_cat
...
examples/filesystem: include fflush in `cat` command
2020-05-19 16:37:21 +02:00
Leandro Lanzieri
16113afb1e
Merge pull request #14026 from miri64/gnrc_netif/fix/deps
...
gnrc_netif: use gnrc_netif-submodules to pull in upper-layer struct members
2020-05-19 16:36:18 +02:00
Martine S. Lenders
5e8f8ddc4a
gnrc_netif: introduce gnrc_netif_mac pseudo-module for gnrc_mac members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
Martine S. Lenders
a48629b395
gnrc_netif: introduce gnrc_netif_ipv6 pseudo-module for IPv6 members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
Martine S. Lenders
9801a439fc
gnrc_netif: introduce gnrc_netif_6lo pseudo-module for 6LoWPAN members
...
This aims to reduce circular dependencies in GNRC.
2020-05-19 16:10:59 +02:00
Martine S. Lenders
0d2f0a5ba4
gnrc_netif: fix gnrc_netif_lorawan dependencies
2020-05-19 16:10:58 +02:00
Vincent Dupont
8d9cc3f7e6
Merge pull request #14100 from OTAkeys/fix/exti_pr_clear_issue_upstream
...
cpu/stm32_common: fix issue while clearing EXTI->PR reg
2020-05-19 15:08:52 +02:00
Martine S. Lenders
991c2e9ec4
tests/unittests: amend sock_util tests for interface parsing
2020-05-19 14:57:41 +02:00
Martine S. Lenders
a603504a6e
sock_util: add interface descriptor parsing to str2ep
2020-05-19 14:57:41 +02:00
b3cb03ae90
tests/periph_spi: Fix column alignment
2020-05-19 14:21:20 +02:00
7c44208e64
tests/periph_spi: Convert printf specifier to PRIu32
2020-05-19 14:20:42 +02:00
788d186725
tests/periph_spi: Add thread runtime stats
...
This commit extends the periph_spi benchmark with timing statistics for
the thread runtime, counting only the time the thread initiating the SPI
request is busy with the SPI transfer. This is useful to measure timings
on SPI transfers when DMA and other async mechanisms are used to
transfer the bytes
2020-05-19 14:17:46 +02:00
bf35edf3c6
Merge pull request #14036 from jue89/fix/xtimer_on_ztimer
...
ztimer: pull in xtimer_on_ztimer only if ztimer_periph_timer is used
2020-05-19 12:26:12 +02:00
Leandro Lanzieri
5c84006793
Merge pull request #14099 from cgundogan/pr/tests_dns
...
tests: dns: use correct macro names
2020-05-19 12:14:14 +02:00
898c6a758e
examples/filesystem: include newline in cat command
2020-05-19 11:45:15 +02:00
Cenk Gündoğan
8f4583cb5e
tests: dns: use correct macro names
2020-05-19 11:33:28 +02:00
b15c4ef418
Merge pull request #14069 from benpicco/cpu/nrf52-cleanup
...
cpu/nrf52: update & fix vendor files, derive flash settings
2020-05-19 10:55:50 +02:00
benpicco
9f707bf121
Merge pull request #14057 from bergzand/pr/nrf52/dma_spi
...
nrf52: Implement EasyDMA-based SPI peripheral implemenation
2020-05-18 19:42:33 +02:00
e76ee57b35
ruuvitag: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
e1d7d3d838
reel: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
c90bc72ce9
pinetime: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
d15987bc9b
nrf52dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
93acc998c4
nrf52840dk: Adapt SPI periph config
2020-05-18 19:18:30 +02:00
f42a796c02
feather-nrf52840: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
1e15bb2680
particle-mesh: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
628d3e9080
nrf52: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
88c244bc75
arduino-nano-33-ble: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
919ca1c4b5
adafruit-clue: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
825c4c8cb7
acd52832: Adapt SPI periph config
2020-05-18 19:18:29 +02:00
16ff94b4fe
nrf5x: remove common nrf5x spi peripheral driver
2020-05-18 19:18:28 +02:00
99a59c5dbd
nrf5x: Extend gpio with exti channel retrieval
2020-05-18 19:17:29 +02:00
720ccad7dd
nrf52: Add EasyDMA-based SPI periph driver
2020-05-18 19:16:17 +02:00
1139c0737f
nrf52: add common SPI/I2C IRQ code
2020-05-18 19:14:56 +02:00
Abdulkerim Altuntas
578bd31908
cpu/stm32_common: fix issue while clearing EXTI->PR reg
...
Since the "EXTI->PR" is an "rc_w1" type of register, we need to be
careful when clearing our interrupt flag in the register. When there
are multiple interrupt flags set in the register, the "|=" operation
will mistakenly clear all pending interrupts instead of just ours.
2020-05-18 18:36:27 +02:00
Martine Lenders
87403c7d44
Merge pull request #14092 from SemjonKerner/deprecate_softdevice
...
pkg/softdevice: add deprecation warning
2020-05-18 12:35:49 +02:00
benpicco
cc44992abe
Merge pull request #12827 from maribu/atmega_pwm
...
cpu/atmega_common/periph/pwm: Minor fix & cleanup
2020-05-16 22:26:58 +02:00
Marian Buschsieweke
0b2ee71285
Merge pull request #14094 from benpicco/tests/periph_pwm-atmega
...
tests/periph_pwm: limit OSC_STEPS to 256 so the test works on all platforms
2020-05-16 21:04:44 +02:00
Marian Buschsieweke
506288791d
cpu/atmega_common/periph/pwm: Minor fix & cleanup
...
- On pwm_poweron, the PWM resolution was not restored. (A custom resolution was
only usable if, PWM channel 0 is not used. That configuration is not common,
so this bug was likely never triggered)
- Disabled a work around to prevent flickering:
- Previously, PWM was disconnected on level 0% and 100%
- This increases the run time of `pwm_set()`
- It prevents using the PWM for wave form generation via DDS, as the wave
noticeably jumps when reaching 0% or 100%
- Slightly reduces memory requirements: 2 Bytes of RAM, 112 Bytes of ROM
- Tested with avr-gcc 9.2.0 and LTO enabled
2020-05-16 20:43:31 +02:00
Benjamin Valentin
bdf40d5ffa
cpu/nrf52: fix NRF52811 vendor file
...
That `system_nrf52811.h` include must be removed.
2020-05-16 19:22:14 +02:00
Benjamin Valentin
d8a5f87aee
cpu/nrf52: update vendor files
2020-05-16 19:21:56 +02:00
benpicco
22b2f3664f
Merge pull request #14089 from maribu/atmega_cpu_cleanup
...
cpu/atmega{_common,32u4}: Cleanup
2020-05-16 19:17:29 +02:00
benpicco
1776e54d80
Merge pull request #13604 from gschorcht/drivers/sx127x/dio_handling
...
drivers/sx127x: changes in DIO handling
2020-05-16 19:12:26 +02:00
Benjamin Valentin
6ba4225eed
tests/periph_pwm: limit OSC_STEPS to 256 to work on all platforms
...
The ATmega PWM implementation only supports a maximum resolution of 256.
Thus when running `osci` with `OSC_STEPS` = 1000 an assertion will fail and
the test crashes, even though the PWM peripheral works perfectly fine.
Limit OSC_STEPS to 256 so it works on all platforms.
The LED flashing doesn't look any more coarse.
2020-05-16 18:57:06 +02:00
