17045: sys/coding: add XOR based coding module r=benpicco a=benpicco
19243: cpu/gd32v: add periph_gpio_ll and periph_gpio_ll_irq support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_gpio_ll` and `periph_gpio_ll_irq` support for GD32VF103. Level triggered interrupts are emulated.
`periph_gpio_ll_irq` could be split off from this PR as a separate PR if necessary.
### Testing procedure
Use any GD32V board and connect PA0 -> PB0 and PA1 -> PB1 where PA is the output port and PB the input port. With these connections `tests/periph_gpio_ll` should work.
```
BOARD=sipeed-longan-nano make -j8 -C tests/periph_gpio_ll flash term
```
If necessary, change the input and output pins by setting the environment variables and connect the corresponding pins, for example for `seeedstudio-gd32` PA1 -> PB8 and PA8 -> PB9:
```
PIN_OUT_0=1 PIN_OUT_1=8 PIN_IN_0=8 PIN_IN_1=9 BOARD=seedstudio-gd32 make -j8 -C tests/periph_gpio_ll flash term
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19251: tests/driver_dac_dds: fix output of sine and saw functions r=benpicco a=benpicco
19254: cpu/gd32v: add periph_rtc_mem support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_rtc_mem` support for GD32VF103.
A modified version of this driver could also be used for STM32F1.
### Testing procedure
`tests/periph_rtt` should work on any GD32V board, for example:
```
BOARD=sipeed-longan-nano make -C tests/periph_rtt flash
```
```
Help: Press s to start test, r to print it is ready
START
main(): This is RIOT! (Version: 2023.04-devel-319-gebc86-cpu/gd32v/periph_rtc_mem)
RIOT RTT low-level driver test
RTT configuration:
RTT_MAX_VALUE: 0xffffffff
RTT_FREQUENCY: 32768
Testing the tick conversion
Trying to convert 1 to seconds and back
Trying to convert 256 to seconds and back
Trying to convert 65536 to seconds and back
Trying to convert 16777216 to seconds and back
Trying to convert 2147483648 to seconds and back
All ok
Initializing the RTT driver
RTC mem OK
This test will now display 'Hello' every 5 seconds
RTT now: 1
Setting initial alarm to now + 5 s (163841)
rtt_get_alarm() PASSED
RTC mem OK
```
### Issues/PRs references
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18903: pkg/tinyusb: add tinyUSB netdev driver r=dylad a=gschorcht
### Contribution description
This PR adds the tinyUSB netdev driver.
The tinyUSB netdev driver is part of the tinyUSB package and is enabled by module `tinyusb_netdev`. It is available for boards that provide the `tinyusb_device` feature.
**Please note** Since the tinyUSB package is distinct from (and incompatible with) the USB stack provided around USBUS in RIOT (see USB), the tinyUSB netdev driver cannot be used together with with any USBUS device class.
The tinyUSB netdev driver uses Ethernet over USB and supports the following protocols:
- CDC ECM (Ethernet Control Model)
- CDC NCM (Network Control Model)
- RNDIS (Microsoft Remote NDIS)
While Linux and macOS support all these protocols, Microsoft Windows only supports the RNDIS protocol and since Windows version 11 also the CDC NCM protocol. macOS supports the RNDIS protocol since version 10.15 (Catalina).
Which protocol is used is selected by the corresponding pseudomodules `tinyusb_class_net_cdc_ecm`, `tinyusb_class_net_cdc_ncm` and `tinyusb_class_net_rndis`.
The CDC ECM protocol (`tinyusb_class_net_cdc_ecm`) and the RNDIS protocol (`tinyusb_class_net_rndis`) can be used simultaneously to support all operating systems, for example :
```
USEMODULE='tinyusb_netdev tinyusb_class_net_rndis tinyusb_class_net_cdc_ecm' \
BOARD=... make -C ... flash
```
In this case, the CDC ECM protocol is the default protocol and the RNDIS protocol the alternative protocol defined as second device configuration. The CDC NCM protocol cannot be used together with the CDC ECM or the RNDIS protocol.
This PR includes PR #18983 for now to be compilable.
Comparison with USBUS CDC ECM (`nucleo-f767zi` board):
```
text data bss dec hex filename
65916 596 18728 85240 14cf8 tests_pkg_tinyusb_netdev.elf
```
```
text data bss dec hex filename
63120 544 15444 79108 13504 tests_usbus_cdc_ecm.elf
```
### Testing procedure
Use a board that is supported by tinyUSB. Compile and flash the test application for each protocol:
1. RNDIS
```
BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
2. CDC ECM
```
CLASS=tinyusb_class_net_cdc_ecm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
3. CDC NCM
```
CLASS=tinyusb_class_net_cdc_ncm BOARD=... make -j8 -C tests/pkg_tinyusb_netdev flash
```
For each test, a network interface should be added on the host. Use command `ifconfig` on USB device and on the host and check that both have a link local address. In syslog there should be an output like the following:
<details>
```
Nov 13 18:14:46 gunny8 kernel: [4611465.480025] usb 1-2.2: new full-speed USB device number 28 using xhci_hcd
Nov 13 18:14:47 gunny8 kernel: [4611465.581641] usb 1-2.2: New USB device found, idVendor=1209, idProduct=7d01, bcdDevice= 1.00
Nov 13 18:14:47 gunny8 kernel: [4611465.581646] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 13 18:14:47 gunny8 kernel: [4611465.581650] usb 1-2.2: Product: nucleo-f767zi
Nov 13 18:14:47 gunny8 kernel: [4611465.581653] usb 1-2.2: Manufacturer: RIOT-os.org
Nov 13 18:14:47 gunny8 kernel: [4611465.581654] usb 1-2.2: SerialNumber: 6591620BCB270283
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1066] manager: (usb0): new Ethernet device (/org/freedesktop/NetworkManager/Devices/528)
Nov 13 18:14:47 gunny8 kernel: [4611465.594604] rndis_host 1-2.2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2.2, RNDIS device, fa:db:7c:1b:58:80
Nov 13 18:14:47 gunny8 mtp-probe: checking bus 1, device 28: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2"
Nov 13 18:14:47 gunny8 mtp-probe: bus: 1, device: 28 was not an MTP device
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 kernel: [4611465.643852] rndis_host 1-2.2:1.0 enp0s20f0u2u2: renamed from usb0
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:usb0 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00001002
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.1833] device (usb0): interface index 508 renamed iface from 'usb0' to 'enp0s20f0u2u2'
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.1
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2037] device (enp0s20f0u2u2): state change: unmanaged -> unavailable (reason 'managed', sys-iface-state: 'external')
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnetBridge: Adding interface enp0s20f0u2u2 index:508
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2075] device (enp0s20f0u2u2): carrier: link connected
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2/1-2.2:1.0
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2129] settings: (enp0s20f0u2u2): created default wired connection 'Kabelgebundene Verbindung 2'
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <warn> [1668359687.2142] device (enp0s20f0u2u2): connectivity: "/proc/sys/net/ipv4/conf/enp0s20f0u2u2/rp_filter" is set to "1". This might break connectivity checking for IPv4 on this device
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2151] device (enp0s20f0u2u2): state change: unavailable -> disconnected (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 upowerd[2845]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.2
Nov 13 18:14:47 gunny8 systemd-udevd[17796]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2403] policy: auto-activating connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2414] device (enp0s20f0u2u2): Activation: starting connection 'Kabelgebundene Verbindung 2' (0b1ae45e-c76e-3efb-a2cd-138ca2b2a59c)
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2419] device (enp0s20f0u2u2): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2429] device (enp0s20f0u2u2): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2440] device (enp0s20f0u2u2): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Nov 13 18:14:47 gunny8 NetworkManager[24229]: <info> [1668359687.2445] dhcp4 (enp0s20f0u2u2): activation: beginning transaction (timeout in 45 seconds)
Nov 13 18:14:47 gunny8 vmnetBridge: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 vmnet-natd: RTM_NEWLINK: name:enp0s20f0u2u2 index:508 flags:0x00011043
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Joining mDNS multicast group on interface enp0s20f0u2u2.IPv6 with address fe80::dba4:adb8:9ffe:d93e.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: New relevant interface enp0s20f0u2u2.IPv6 for mDNS.
Nov 13 18:14:47 gunny8 avahi-daemon[1464]: Registering new address record for fe80::dba4:adb8:9ffe:d93e on enp0s20f0u2u2.*.
Nov 13 18:14:47 gunny8 kernel: [4611465.895046] userif-1: sent link down event.
Nov 13 18:14:47 gunny8 kernel: [4611465.895052] userif-1: sent link up event.
```
</details>
Ping from and to the host.
### Issues/PRs references
Depends on PR https://github.com/RIOT-OS/RIOT/pull/18983
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18863: boards/esp32s2-mini: add definition for ESP32 S2 Mini r=gschorcht a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19193: rust: Update dependencies, use riot-wrappers from git r=benpicco a=chrysn
### Contribution description
As riot-wrappers has advanced a bit since it was last released, Rust modules are switched to using it from git again. (This is a regular ping-pong between testing the latest release in RIOT master, and using released support crates when they're current).
This primarily updates riot-wrappers, which has accumulated several compatible changes. Several other crates receive updates as well.
### Testing procedure
* Green CI
### Issues/PRs references
Changes on the riot-wrappers side:
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/17
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/22
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/29
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/30
[edit: added:]
This also serves to help preparing a 0.8.1 release of riot-wrappers, which performs some deprecations so that a breaking 0.9 change can be done more effortlessly later on.
19214: cpu/gd32v: add periph_spi support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_spi` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V.
### Testing procedure
`tests/periph_spi` as well as a test with any SPI sensor should work. `tests/driver_sdcard_spi` should work on `sipeed-longan-nano`.
### Issues/PRs references
Depeneds on PR #19216
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
16782: drivers/mfrc522: add new driver r=benpicco a=HendrikVE
### Contribution description
This PR adds support for the MFRC522. It is quite common in the Arduino world and it is quite cheap. The driver connects to the MFRC522 via SPI and is heavily based on the Arduino driver available [here](https://github.com/miguelbalboa/rfid). Basically it was ported, but with several improvements in readability and documentation.
### Testing procedure
The given (manual) test provides single commands for some driver functions.
19201: cpu/gd32v: add periph_i2c support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_i2c` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V. As for STM32F1, the driver is using polling instead of interrupts for now. It will be implemented interrupt-driven later.
### Testing procedure
`tests/periph_i2c` as well as a test with any I2C sensor should work. The driver was tested with `tests/driver_l3gxxxx` and `tests/driver_bmp180`.
### Issues/PRs references
Co-authored-by: Hendrik van Essen <hendrik.ve@fu-berlin.de>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Testing the correct calculation of flash page indices without assuming the `periph_flashpage` feature and enabling the `periph_flashpage` module makes no sense. On ESP32x SoCs for example, the space in the flash is only reserved and `FLASHPAGE_NUMOF` is greater than 0 if `periph_flashpage` is used.
18472: drivers/mrf24j40: add support for IEEE 802.15.4 Radio HAL r=benpicco a=jia200x
19175: drivers/periph_common/flashpage: fix silent error r=benpicco a=Enoch247
### Contribution description
This patch removes a test that silently hides failed writes to NULL. Instead, assert is used to ensure that the address is not NULL.
### Testing procedure
I am not certain how to update the tests to catch asserts. If this is possible, I will add a test, if someone will point me to a good example to learn from.
### Issues/PRs references
- none
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
The way it's now it's easy to interpret that there was an error, when
really there was not. As seen in issue #19025 quite some time can be
spent following a wrong clue.
19166: boards/seeedstudio-gd32: complete and improve board definition r=kaspar030 a=gschorcht
### Contribution description
This PR completes and improves the board definition for the Seeedstudio GD32 RISC-V Dev board. It
- adds the user LED and Button definitions to `board.h` (bef4209109)
- adds the SAUL support for user LED and Button definitions (7a5b2f1fb43f5e28eec4f65c8e7367510be6eb80)
- changes the OpenOCD configuration (32c0c4b1b5b9705ffcd2bb02a1d868ad35ca3bbc)
- to be usable with Upstream OpenOCD release version 0.12.0
- to allow different FTDI configuration and other adapters
- adds a documentation with flashing guide, feature list, support status, pinout, schematic reference (9dcc83b8ceb8a9ce526f0a03053a242e866ebf4a)
These changes is the first PR for a number of follow-up PR I will provide in next days to extend the GD32VF103 support. I have already working
- `periph_adc` support,
- `periph_spi` support,
- `tinyusb_device` support,
and almost finished
- `periph_i2c` support (implemented and working with some errors),
- `pm_layered` support (implemented but not working correctly yet), and
- `periph_usbdev` support (implemented by extending `usbdev_synopsys_dwc2 driver but bot working yet).
I will try to implement
- `periph_gpio_irq` support,
- `periph_rtc` support, and
- `periph_rtt` support.
Since I'm using the Sispeed Longan Nano board for testing, I will add the board definition for this board. I will then move some board definitions to a common folder.
### Testing procedure
Green CI.
Documentation should be generated correctly.
Flashing the `seeedstudio-gd32` should still work.
`tests/leds` should work.
### Issues/PRs references
19171: tests/gnrc_rpl: Disable CI test for native r=benpicco a=maribu
### Contribution description
This disables the `tests/grnc_rpl` test run for `native`. This test is too flaky to be included in the CI.
### Testing procedure
Not needed
### Issues/PRs references
None
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19079: cpu/esp32: add periph_flashpage support r=kaspar030 a=gschorcht
### Contribution description
This PR provides the `periph_flashpage` support for ESP32x SoCs.
For byte-aligned read access to constant data in the flash, the MMU of all ESP32x SoCs allows to map a certain number of 64 kByte pages of the flash into the data address space of the CPU. This address space is called DROM. Normally the whole DROM address space is assigned to the section `.rodata`. The default flash layout used by all ESP32x SoCs is:
| Address in Flash | Content |
|:-----------------------|:-----------|
| `0x0000` or `0x1000` | bootloader |
| `0x8000` | parition table |
| `0x9000` | `nvs` parition with WiFi data |
| `0xf000` | `phy_init` partition with RF data |
| `0x10000` | `factory` partition with the app image |
The factory partition consists of a number of 64 kByte pages for the sections `.text`, `.rodata`, `.bss` and others. The `.text` and `rodata` sections are page-aligned and are simply mapped into the instruction address space (IROM) and the data address space (DROM), respectively. All other sections are loaded into RAM.
If the `periph_flashpage` module is used, the `periph_flashpage` driver
- decreases the size of the `.rodata` section in DROM address space by `CONFIG_ESP_FLASHPAGE_CAPACITY`,
- adds a section `.flashpage.writable` of size `CONFIG_ESP_FLASHPAGE_CAPACITY` at the end of DROM address space that is mapped into data address space of the CPU,
- reserves a region of size `CONFIG_ESP_FLASHPAGE_CAPACITY` starting from `0x10000` in front of the image partition `factory` and
- moves the image partition `factory` by `CONFIG_ESP_FLASHPAGE_CAPACITY` to address `0x10000 + CONFIG_ESP_FLASHPAGE_CAPACITY`.
The new flash layout is then:
| Address in Flash | Content |
|:-----------------------|:-----------|
| `0x0000` or `0x1000` | bootloader |
| `0x8000` | parition table |
| `0x9000` | `nvs` parition with WiFi data |
| `0xf000` | `phy_init` partition with RF data |
| `0x10000` | flashpage region |
| `0x10000 + CONFIG_ESP_FLASHPAGE_CAPACITY` | `factory` partition with the app image |
This guarantees that the flash pages are not overwritten if a new app image with changed size is flashed. `CONFIG_ESP_FLASHPAGE_CAPACITY` has to be a multiple of 64 kBytes.
~The PR includes PR #19077 and PR #19078 for the moment to be compilable.~
### Testing procedure
The following tests should pass.
```
USEMODULE='esp_log_startup ps shell_cmds_default' BOARD=esp32-wroom-32 make -j8 -C tests/periph_flashpage flash term
```
```
USEMODULE='esp_log_startup ps shell_cmds_default' BOARD=esp32-wroom-32 make -j8 -C tests/mtd_flashpage flash term
```
### Issues/PRs references
Depends on PR #19077
Depends on PR #19078
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
If a board has fixed defines for `WS281X_PARAM_PIN` and `WS281X_PARAM_NUMOF`
the test will overwrite them.
This leads to the LEDs *not* working in with the test, which is very confusing.
17066: sys/irq: Add C++ wrapper using RAII r=maribu a=jenswet
### Contribution description
This adds a C++ wrapper around the `irq.h` API. The wrapper uses RAII to accomplish a convenient and bug resistent use.
A little background: I'm currently writing my master thesis on using C++ for embedded development, at the working group that `@maribu` is part of. For that I will try to add better C++ support to several parts of RIOT and then do some benchmarking and metrics to compare it with the C implementation. For example, I also plan to add a wrapper around i2c, a std::cout drop-in replacement and probably some more about networks or threads.
### Testing procedure
I've added a unit test to verify that the IRQ wrapper calls the original `irq` functions as expected. As C++ and wrapper testing isn't done much so far in this project, I've added two additional headers to ease testing:
1. #17076 - fake functions framework, already merged
2. As there is no framework for C++ unit tests yet, I've added something for this too. Unfortunately the existing frameworks like GoogleTest, CppUTest or CppUnit don't easily compile for embedded or are difficult to integrate in to the RIOT build process. That's why I wrote some (simple) helper functions and macros inspired by the above frameworks. That allows to create C++ tests based on a fixture class with set up and tear down methods. It also allows some simple assertions and is easily extendable for other use cases. It wraps some of the fff functionality too.
Both of this is obviously not required for the initial reason of this PR. But I'd like to provide unit tests for the features that I suggest to introduce where possible. So I'd appreciate some feedback on that too. If you'd prefer a PR without or different tests please let me know.
You can run the test `irq_cpp` locally or on the CI to test the implementation.
Please feel free to give feedback or suggest improvements!
Co-authored-by: Jens Wetterich <jens@wetterich-net.de>
17460: pkg/arduino_adafruit_sensor: add Adafruit Unified Sensor Driver as package r=benpicco a=gschorcht
### Contribution description
This PR provides the [Adafruit Unified Sensor Driver](https://github.com/adafruit/Adafruit_Sensor) as package.
There are a number of Adafruit sensor drivers which all use a common base class `Adafruit_Sensor` from the [Adafruit Unified Sensor Driver](https://github.com/adafruit/Adafruit_Sensor). To support such drivers, the Adafruit Unified Sensor Driver is provided as package.
Adafruit sensor driver for ST LSM9DS0 will be provided as separat PR as package for demonstration and testing.
PR #12518 will be rebased for testing to have an Adafruit sensor driver for a sensor for which there is a native driver in RIOT.
### Testing procedure
Use a board that provides the `arduino` feature and flash
```
BOARD=... make -C tests/pkg_arduino_adafruit_sensor flash test
```
PR #12518 can be used as a more complex test for using the package.
### Issues/PRs references
Prerequisite for PR #12518
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18763: sys/tiny_strerror: add missing error codes r=benpicco a=maribu
### Contribution description
When double-checking the error codes provided by newlib by default (without magic defines, such as `__LINUX_ERRNO_EXTENSIONS__` or `__CYGWIN__`), some where still missing in `tiny_strerror()`. This adds the missing ones.
This in turn showed that three errno codes were missing in the avr-libc compat `errno.h`, which are added as well.
### Testing procedure
Murdock should double check that the added errno codes indeed are defined by default.
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
