8bd320b34f
boards/phynode-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
7d90a48a3d
boards/usb-kw41z: use common configuration
2019-05-07 21:57:05 +02:00
151803da5b
boards/frdm-kw41z: use common configuration
2019-05-07 21:57:04 +02:00
cb4cdee0ef
boards/common: introduce common code for kw41z boards
2019-05-07 21:57:04 +02:00
Leandro Lanzieri
9075e1d207
Merge pull request #11290 from gschorcht/cpu/esp32/periph/conf/dac
...
boards/esp32: changes the approach for configurations of DAC channels in board definitions
2019-05-07 11:35:34 +02:00
990086aee7
Merge pull request #11479 from cladmi/pr/kinetis/hwrng
...
kinetis: move filtering-out periph_hwrng in cpu/kinetis
2019-05-06 17:42:16 +02:00
Gaëtan Harter
19224ec1d5
kinetis: move filtering-out periph_hwrng in cpu/kinetis
...
This removes doing `filter-out periph_hwrng, $(FEATURES_PROVIDED)`
after processing `cpu/$(CPU)/Makefile.features`.
The current solution is a HACK as `CPU_MODEL` is currently not available
at that moment but will be in the near future.
It will allow always including `cpu/$(CPU)/Makefile.features` after
`boards/$(BOARD)/Makefile.features`.
It is a part of moving `CPU/CPU_MODEL` definitions to `Makefile.features`.
2019-05-06 15:12:47 +02:00
Gunar Schorcht
008f1c5d55
boards/esp32: UART configuration approach changed
...
UART devices are now configured using static array in header files instead of static variables in implementation to be able to define UART_NUMOF using the size of the array instead of a variable.
2019-05-06 13:34:59 +02:00
Gunar Schorcht
23cc987184
boards/esp32: SPI configuration approach changed
...
SPI devices are now configured using static array in header files instead of static variables in implementation to be able to define SPI_NUMOF using the size of the array instead of a variable.
2019-05-06 13:33:48 +02:00
Gunar Schorcht
bd354dd29f
boards/esp32: PWM configuration approach changed
...
PWM channels are now configured using static array in header files instead of static variables in implementation.
2019-05-06 13:32:52 +02:00
Gunar Schorcht
6a3bc3e242
boards/esp32: I2C configuration approach changed
...
I2C devices are now configured using static array in header files instead of static variables in implementation to be able to define I2C_NUMOF using the size of the array instead of a variable.
2019-05-06 13:32:06 +02:00
Gunar Schorcht
7e8a1c1ea6
boards/esp32: DAC config approach changed
...
DAC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define DAC_NUMOF using the size of these arrays instead of a variable.
2019-05-06 13:29:38 +02:00
Gunar Schorcht
880e156602
boards/esp32: disable DAC for WROVER-Kit boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
f872eb9488
boards/esp32: disable DAC for Olimex ESP32 boards
2019-05-06 13:29:38 +02:00
Gunar Schorcht
18cb678dd7
boards/esp32_wrover_kit: documentation improvement
...
Adds a reference to a vendor document about hardware configuration.
2019-05-03 07:57:30 +02:00
Gunar Schorcht
3db78e0423
boards/esp32: ADC config approach changed
...
ADC pins are now configured using static arrays in header files instead of static variables in implementation to be able to define ADC_NUMOF using the size of these arrays instead of a variable.
2019-05-02 16:39:04 +02:00
Gunar Schorcht
0bab7e08cf
boards/esp32: disable ADC for Olimex ESP32 EVB
2019-05-02 16:38:58 +02:00
Emmanuel Baccelli
4c3e49ee40
Merge pull request #11475 from kaspar030/add_iotpush_copyrights
...
add copyrights from IOTPUSH project
2019-05-02 12:42:17 +02:00
0ec9c57b2b
add copyrights from IOTPUSH project
2019-05-02 12:09:37 +02:00
Leandro Lanzieri
7c14ff4153
Merge pull request #11337 from gschorcht/cpu/esp32/periph/submodules
...
cpu/esp32: fix of periph_* submodule compilation
2019-05-01 23:51:03 +02:00
Gunar Schorcht
a3c314f0cd
boards/esp32*: print config for enabled modules
2019-05-01 09:40:17 +02:00
Juan I Carrano
d4edbea332
Merge pull request #11454 from cladmi/pr/frdm-k64f/hack/hwrng
...
boards/frdm-k64f: hack disable periph_hwrng as it crashes
2019-04-29 11:40:40 +02:00
Yegor Yefremov
2c41c9e094
boards/lobaro-lorabox: make sx127x definition consistent
...
No need to specify SX127X_PARAMS structure as it is already
defined in drivers/sx127x/include/sx127x_params.h.
Also remove SX127X_PARAM_SPI and SX127X_PARAM_PASELECT as their
values are the same as default ones.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-29 09:07:29 +02:00
Gaëtan Harter
8f9c629aaf
boards/frdm-k64f: hack disable periph_hwrng as it crashes
...
Use the same disable as in `frdm-kw41z`.
2019-04-26 12:09:55 +02:00
Yegor Yefremov
3d6bc49d9a
boards/esp32-olimex-evb: fix comment typo
...
Replace "ob-board" with "on-board" in LED description.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-17 16:59:48 +02:00
ccebd2bd2f
boards/calliope-mini: enable pyocd programmer option
2019-04-17 14:09:29 +02:00
b4fcccc8fe
boards/calliope-mini: use dap adapter with openocd
2019-04-17 14:08:02 +02:00
Yegor Yefremov
46060cf779
boards/esp32*: revise CAN support
...
CAN interface is now supported in RIOT. Change feature tables
accordingly.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-11 07:34:29 +02:00
Yegor Yefremov
4c270eecfa
boards/esp32*: fix ENC28J60 configuration example
...
Add missing '#' to the MODULE_ENC28J80's endif.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-04-10 15:14:47 +02:00
Sebastian Meiling
29efd8402f
boards: add I2C config for cc2650stk
2019-04-09 18:07:06 +02:00
21e55bbd28
boards/hifive1: fixup custom reset command
2019-04-09 12:46:15 +02:00
44ecf0e7f2
boards/cc2650-launchpad: configure i2c feature
2019-04-08 11:32:11 +02:00
Sebastian Meiling
4dd09eaa06
Merge pull request #6178 from OTAkeys/pr/can_stm32
...
can stm32: add a driver for STM32 bxCAN peripheral
2019-04-08 08:50:08 +02:00
Hyungsin
d9c17c2154
boards: add initial hamilton board support
2019-04-03 15:00:35 -07:00
Vincent Dupont
2cb8c4b75c
boards/esp32-olimex-evb: disable periph_can
2019-04-03 11:12:46 +02:00
Vincent Dupont
3db7c65438
boards/nucleo-f413zh: add periph_can as supported
2019-04-03 11:12:46 +02:00
d021d971fb
boards/nucleo-l073rz: enable LSE clock
2019-03-29 11:37:22 +01:00
330f97f15f
boards/b-l072z-lrwan1: enable LSE clock
2019-03-29 11:36:07 +01:00
Vincent Dupont
242c0cc7aa
Merge pull request #11266 from aabadie/pr/boards/b-l072z-lrwan1_rtt
...
boards/b-l072z-lrwan1: provide periph_rtt feature
2019-03-29 11:30:23 +01:00
14f47bf220
Merge pull request #10695 from aabadie/pr/drivers/lpsxxx
...
drivers/lpsxxx: refactor lps331ap and add support for lps25hb + lps22hb
2019-03-29 10:54:08 +01:00
34ee41ee14
boards/b-l072z-lrwan1: provide and configure rtt peripheral
2019-03-29 09:33:09 +01:00
Kevin "Bear Puncher" Weiss
2d7c72db7f
Merge pull request #11231 from gschorcht/cpu/esp32/periph/uart_mode
...
cpu/esp32: add the new API function uart_mode to periph/uart
2019-03-28 19:29:38 +01:00
Gunar Schorcht
217ccbe1c4
cpu/esp32: add new uart_mode API function
...
The internal _uart_set_mode function is exposed if module periph_uart_modecfg is enabled.
2019-03-28 16:36:04 +01:00
Gaëtan Harter
29ada72a9e
Merge pull request #11254 from cladmi/pr/make/openocd/flashfile
...
makefiles/openocd.inc.mk: use FLASHFILE
2019-03-28 11:56:59 +01:00
Gaëtan Harter
5ce0c8f50d
boards/seeeduino_arch-pro: use FLASHFILE variable
...
Update to use FLASHFILE as file to be flashed on the board.
openocd.inc.mk now uses FLASHFILE variable so does not need to overwrite
FFLAGS anymore.
2019-03-26 19:26:42 +01:00
Martine Lenders
790f763d3d
native: use -g3 instead of -g
2019-03-26 18:53:27 +01:00
emmanuelsearch
61c793aa4c
cpu/cortexm_common: Add image_baseaddr support for Cortex-M23
2019-03-26 11:46:00 +01:00
emmanuelsearch
78cbf4fb57
saml1x: Add riotboot support
2019-03-26 11:46:00 +01:00
7daf5966c2
arduino-zero: add usbdev feature
2019-03-26 10:26:12 +01:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
d7804823db
sam0_common: Add USB peripheral driver
2019-03-26 10:26:11 +01:00
Marian Buschsieweke
d00becbc4b
boards/nucleo-f767zi: Use shared clock settings
...
Use boards/common/stm32/include/f7/cfg_clock_216_8_1.h for core clock settings
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
17fd6941ce
boards/common/stm32: SPI divtable for 108MHz/54MHz
2019-03-25 15:51:30 +01:00
Marian Buschsieweke
7ab1ae1b76
boards/common/stm32: Clock for F7 216MHz/8MHz/LSE
...
Added file with clock settings for STM32-F7 CPUs with a core clock of 216MHz,
an external high speed clock of 8 MHz and external low speed clock (32.768kHz)
enabled.
2019-03-25 15:51:30 +01:00
Gunar Schorcht
01d17793eb
boards/cpu/esp32*: doc fix of built-in ROM size
2019-03-25 14:00:59 +01:00
e830462bf2
boards/nrf52840-mdk: fix device type used with pyocd
...
This allows pyOCD to use the right memory values, especially flash size and pyOCD 0.14.1 has support for nrf52840.
2019-03-24 16:48:29 +01:00
1f937cedb7
Merge pull request #11141 from fjmolinas/stm32l0_bootloader
...
stm32l0: add riotboot support
2019-03-24 10:48:48 +01:00
francisco
9624a34e86
boards/b-072z-lrwan1: provide riotboot feature
2019-03-24 10:05:53 +01:00
francisco
235d5ce835
boards/nucleo-l073rz: provide riotboot feature
2019-03-23 20:38:20 +01:00
e7f8e46114
boards/nrf52840-mdk: add missing dependency to 802154 driver
2019-03-23 13:40:18 +01:00
Gaëtan Harter
2523c1b8ef
Merge pull request #11126 from bergzand/pr/nrf52/riotboot
...
nrf52: Add riotboot support
2019-03-20 19:58:41 +01:00
Gaëtan Harter
7d360fcd2a
Merge pull request #11200 from danpetry/tools/jlink_handle_image_offset
...
jlink: handle flashing at IMAGE_OFFSET
2019-03-20 19:13:28 +01:00
Gaëtan Harter
f9cee9e820
Merge pull request #11174 from fjmolinas/stm32lx_dual_bank
...
boards/common/stm32l0: use dual bank with openocd if available
2019-03-20 18:38:19 +01:00
danpetry
f8bb42f787
Openmote-cc2538: format flash start address as hex
...
Declaring the address in decimal format meant that it was being
interpreted as a decimal rather than hex address by the tooling
and the intermediate bash arithmetic. This fixes that bug.
2019-03-20 16:07:51 +01:00
905376eef8
Merge pull request #11103 from aabadie/pr/boards/nrf52832-mdk-v2
...
boards/nrf52832-mdk: add basic support
2019-03-20 15:48:13 +01:00
a218bc62ab
boards/b-l475e-iot01a: add defines and deps for lps22hb
2019-03-20 14:43:37 +01:00
80b337b756
boards/iotlab: update lps331ap device addr define
...
The default address is the same one
2019-03-20 14:43:36 +01:00
d08a028c20
boards: add support for nrf52832-mdk
2019-03-20 14:41:26 +01:00
Gaëtan Harter
9d5e06a512
boards/lpc2k_pgm: use FLASHFILE for boards using lpc2k_pgm
...
Update to use FLASHFILE as file to be flashed on the board.
2019-03-20 14:31:25 +01:00
Hauke Petersen
8216c9397a
Merge pull request #11096 from haukepetersen/add_board_reel
...
boards: add support for Phytec 'reel board'
2019-03-20 10:47:21 +01:00
Marian Buschsieweke
e7e9084c64
Merge pull request #11185 from cladmi/pr/make/msba2/compile_flasher
...
msba2: compile 'lpc2k_pgm' when flashing
2019-03-20 10:38:46 +01:00
Gaëtan Harter
edaaa78851
boards/cc2650: use the common uniflash configuration
...
The content is exactly the same.
2019-03-15 15:54:34 +01:00
Gaëtan Harter
d2103b21ab
boards/cc2650stk: fix whitespace
...
Make it more similar to cc2650-launchpad
2019-03-15 15:39:42 +01:00
Hauke Petersen
ada1d3ce48
boards: add support for Phytec 'reel board'
2019-03-15 10:46:45 +01:00
francisco
026f7dc4a4
boards/stm32lx: use openocd dual bank if possible
2019-03-14 18:10:27 +01:00
Gaëtan Harter
702db3468d
msba2: compile 'lpc2k_pgm' when flashing
...
Add a rule to build `lpc2k_pgm` when flashing.
It is only compiled if it is using the one in `tools`.
If overwritten to `lpc2k_pgm` if it should be taken from the path,
it is not compiled.
The compilation is still done in `boards/common/msba2/tools` as it was
the case before and this commit does not address this.
2019-03-14 16:41:13 +01:00
Marian Buschsieweke
e4ebbaf59f
boards: Add support for the Arduino Nano
...
The Arduino Nano board is the cheapest member of the Arduino family and used the
same MCU as the Arduino Uno. It differs in the form factor (the Nano is much
smaller), it uses an integrated FT232RL TTL adapter instead of an ATmega16u2 to
provide access to the serial console via USB, and it uses a different
bootloader (which occupies 2 KiB of the 32 KiB flash instead of 0.5 KiB occupied
on the Arduino Uno). This commit mostly copy pastes code from the Arduino Uno.
2019-03-14 13:54:38 +01:00
005710effb
nrf52: include riotboot feature when possible
...
The riotboot feature is not compatible with the nordic_softdevice_ble
package at the moment
2019-03-14 12:03:39 +01:00
e3b10e3d7d
Merge pull request #10343 from MrKevinWeiss/pr/fixnucleol1flasher
...
boards/stm32l0: Fix openocd to prevent flash locking
2019-03-14 10:27:02 +01:00
Emmanuel Baccelli
8969fd32e9
Merge pull request #11080 from kaspar030/add_pyboard
...
boards: add pyboard v1.1 support
2019-03-13 17:07:40 +01:00
Juan I Carrano
b50ad9ed4c
Merge pull request #11040 from kaspar030/fix_hifive1_reset
...
boards/hifive1: fix hifive1 reset
2019-03-12 14:59:36 +01:00
b1a7d6093b
boards/hifive1: add and use custom openocd reset command
2019-03-12 11:49:02 +01:00
Gilles DOFFE
f3130a3a81
boards/nucleo64: add motor driver
...
Add motor_driver driver configuration example.
The most simple motor driver type is used here (MOTOR_DRIVER_1_DIR) which
needs only one pin to work.
This example uses already configured PWM channels and 2 free GPIOS.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
3fd3eea5bc
boards/native: add two factice motors with qdec simulation
...
Configure 2 factice motors in one motor_driver.
native_motor_driver_qdec_simulation() is provided to simulate QDEC encoders
virtually linked to the motors.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
ffad5048fc
boards/native: update doc.txt
...
Add PWM and QDEC peripheral description.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
d04c21bb8b
boards/native: add qdec simulation callback
...
native_motor_driver_qdec_simulation() callback is called each time
motor_set() from motor_driver driver is called.
It set associated qdec value to the PWM duty cycle.
QDEC values are stored in qdecs_value[] array in the order motors
are described in board.h.
Then it is needed to configure in first motors that needs the QDEC in
board.h.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
Gilles DOFFE
37981b5bc2
boards/native: add periph_pwm to FEATURES_PROVIDED
...
Add periph_pwm to FEATURES_PROVIDED as PWM is now implemented into native
cpu.
Signed-off-by: Gilles DOFFE <g.doffe@gmail.com>
2019-03-11 01:44:22 +01:00
f390a8df2e
boards/nrf5x: use periph_temperature with saul
2019-03-08 21:14:22 +01:00
1da26d5690
Merge pull request #11105 from aabadie/pr/boards/nrf52840-mdk-openocd-fix
...
boards/nrf52840-mdk: fix openocd programmer configuration
2019-03-06 21:58:34 +01:00
45c4741310
boards/pyboard: initial commit
2019-03-05 22:23:07 +01:00
ee44e58855
Merge pull request #11065 from cladmi/pr/board/nz32/termprog
...
boards/nz32-sc151: do not blindly set TERMFLAGS
2019-03-05 17:07:56 +01:00
840a096ce6
boards/nrf52840-mdk: fix openocd programmer configuration
...
For nrf52 based boards, the default adapter is JLink and nrf52840-mdk
uses dap.
2019-03-05 11:48:16 +01:00
Hauke Petersen
7cb1049eef
Merge pull request #10268 from SemjonKerner/add_nrf154
...
cpu/nrf52/radio: initial support for nrf52's ieee802.15.4 radio
2019-03-04 16:18:43 +01:00
MichelRottleuthner
1642a03125
Merge pull request #11066 from aabadie/pr/boards/common_f4_clock
...
boards/common/stm32: rework common clock configuration for stm32f4
2019-03-04 14:10:47 +01:00
Semjon Kerner
84ebd83a62
boards/nrf52840dk: support ieee802.15.4 radio
2019-03-04 13:21:47 +01:00
Sebastian Meiling
d29d336894
Merge pull request #11039 from maribu/avrdude
...
makefiles/tools: Improved avrdude integration
2019-02-28 22:15:30 +02:00
Marian Buschsieweke
4abc41a227
makefiles/tools: Automatically set avrdude target
...
The CPU variable in the boards Makefile.include file already contains the target
CPU, so there is no reason to provide it in each board again as avrdude flag.
This commit automatically sets the avrdude target from the CPU variable and
removes the unneeded flags.
2019-02-28 20:55:04 +01:00
a5ff1dc32a
boards/stm32f4discovery: use common clock configuration without LSE
...
This fixes the boards being stuck when initializing the RTC
2019-02-27 21:49:56 +01:00
7d31bb43f1
boards/stm32/f4: factorize common clock configuration (168/8)
...
A common configuration file is introduced for stm32f4 with core clock
at 168MHz with HSE at 8MHz, 2 configuration files are introduced to²:
distinguish between clock configuration with and without LSE.
2019-02-27 21:49:55 +01:00
Rotzbua
d606c11d11
tests/leds: initialize led0 by default
...
fix unexpected behavior:
reference #9949
reference #10294
fix redefinition for AUTO_INIT_LED0
2019-02-27 13:09:29 +01:00
