Francisco Molina
e951b720b8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse JLINK_DEVICE
2020-03-03 11:24:27 +01:00
Francisco Molina
22aae93efb
boards/common/slwstk6000b: cleanup slwrb41* includes
2020-03-03 11:24:26 +01:00
Francisco Molina
b7783e67a8
boards/common/slwstk6000b: use slwstk6000b.vars.mk to parse CPU_MODEL
2020-03-03 11:24:26 +01:00
Francisco Molina
96cfa1d41c
boards/common/slwstk6000b: add module variables makefile
2020-03-03 11:22:48 +01:00
benpicco
2ebf1d68b4
Merge pull request #13497 from benpicco/openmote-b-fixes
...
boards/openmote-b: add saul config, add note about flashing
2020-02-28 14:59:25 +01:00
Benjamin Valentin
961b333ea6
boards/openmote-b: add saul config
...
Hook up the GPIOs and the si7006 sensor to SAUL.
2020-02-28 13:37:15 +01:00
Benjamin Valentin
bf96e97e34
boards/openmote-b: extend doc.txt about flashing
...
To flash the board the intelhex python package needs to be installed.
Add a note about it to the documentation.
2020-02-28 13:37:15 +01:00
benpicco
23c5d34284
Merge pull request #10846 from benemorius/kw41z-mini
...
boards: add support for kw41z-mini
2020-02-28 07:40:25 +01:00
Thomas Stilwell
ef6024cf1a
boards: add kw41z-mini
2020-02-27 21:34:04 -06:00
Benjamin Valentin
9d1a2b5fb4
boards/mcb2388: add I2C config
...
The pins for I2C0 and I2C1 are available on the board,
nothing is wired up to them.
2020-02-26 23:41:38 +01:00
Benjamin Valentin
4d5d3eb9e6
boards/msba2: hook up i2c
...
I2C is not used by any chip on the board, but I2C2 is availiable
on the JP3 connector (shared with UART2).
- SDA: P0.10
- SCL: P0.11
2020-02-26 23:41:38 +01:00
cbb248319e
boards/pinetime: update mtd_spi_nor config
2020-02-26 10:00:55 +01:00
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct
...
mtd_spi_nor: Move const params to separate struct
2020-02-26 09:43:18 +01:00
Peter Kietzmann
a27b58fbba
Merge pull request #13479 from MichelRottleuthner/pr_phytec_fix_tmp_addr
...
boards/pba-d-01-kw2x: add config for tmp006 addr
2020-02-25 21:04:20 +01:00
a8231f2079
Merge pull request #13161 from bergzand/pr/pinetime/mtd
...
pinetime: add MTD configuration
2020-02-25 20:44:59 +01:00
Michel Rottleuthner
9ec1a6fab5
boards/pba-d-01-kw2x: add config for tmp006 addr
2020-02-25 20:25:26 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom
...
Driver for AT24CXXX EEPROM
2020-02-25 18:16:45 +01:00
0d468c1068
boards/common/silabs: remove OPENOCD_CONFIG export
2020-02-25 17:26:00 +01:00
f451eb692c
Merge pull request #13452 from aabadie/pr/tools/openocd_config_export
...
tools/openocd: only export OPENOCD_CONFIG to required targets
2020-02-25 15:11:38 +01:00
514873fe12
pinetime: add MTD configuration
2020-02-25 14:31:39 +01:00
785052e410
Merge pull request #13468 from aabadie/pr/tools/bossa_rework
...
tools/bossa: split between 1.8 and 1.9 versions
2020-02-25 13:32:38 +01:00
d41621e95f
boards/arduino-due: force bossa 1.8 version
2020-02-25 11:49:10 +01:00
fe8c242a30
boards/native: remove exports of UNDEF vars
2020-02-25 09:40:34 +01:00
benpicco
77d6eaaf19
Merge pull request #13461 from benpicco/sam_xpro-led-fix
...
boards/samXXX-xpro: clear LED on init
2020-02-24 21:56:36 +01:00
Benjamin Valentin
bc5ac92cff
boards/samXXX-xpro: clear LED on init
...
The LED on the sam-xpro boards is active low, so we have
to turn it off manually, otherwise it's always on.
2020-02-24 19:44:36 +01:00
benpicco
4671fd2fe4
Merge pull request #10475 from chrysn-pull-requests/openocd-for-stk3700
...
boards/any silabs: Allow selecting OpenOCD
2020-02-24 19:12:43 +01:00
fabian18
07f7d818bd
boards/same54-xpro: use at24cxxx EEPROM
2020-02-24 14:00:25 +01:00
9363f077d6
boards: don't export globally OPENOCD_CONFIG
...
The variable is already exported to required target in openocd.inc.mk
2020-02-24 10:04:11 +01:00
bd081cd980
tools/openocd: remove default OPENOCD_CONFIG value
...
The default value is already set in openocd.inc.mk
2020-02-24 10:04:11 +01:00
d7cbfe4f45
Merge pull request #13378 from francois-berder/nucleo-doc-cleanup
...
boards: nucleo*: Cleanup documentation
2020-02-24 08:01:42 +01:00
Jean Pierre Dudey
130467dd91
cc1312-launchpad: add board documentation
...
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
2020-02-22 12:43:11 -05:00
benpicco
ce947b4824
Merge pull request #12955 from gschorcht/cpu/esp/deduplicate_and_cleanup
...
cpu/esp*: code deduplication and cleanup
2020-02-22 13:03:18 +01:00
benpicco
261ede7b79
Merge pull request #13414 from benpicco/boards/same54-xpro/peripheral-clocks
...
boards/same54-xpro: don't source peripheral clocks from main clock
2020-02-21 23:25:22 +01:00
benpicco
8d77ec55ae
Merge pull request #13409 from aabadie/pr/cpu/nrf_gpio_t
...
cpu/nrf5x: provide gpio_t type definition
2020-02-21 18:55:46 +01:00
Martine Lenders
4be4f5ad0a
boards/native: add deprecation warnings for make all-debug
2020-02-21 12:51:41 +01:00
Martine Lenders
1786a8353a
boards/native: remove now unnecessary -g3 CFLAGS
...
dbd865413c
2020-02-21 12:50:02 +01:00
benpicco
ea24d30e7a
Merge pull request #13417 from gschorcht/boards/esp32/doc_remove_mcu_table
...
boards/esp32: remove MCU feature table in board documentation
2020-02-21 10:13:44 +01:00
Gunar Schorcht
d251ffd205
boards/esp8266: enable arduino feature
2020-02-21 09:09:34 +01:00
Gunar Schorcht
51200364da
boards/esp8266: fix ARDUINO_LED definitions
...
ARDUINO_LED specifies the according Arduino pin to which the LED is connected and not the GPIO.
2020-02-21 09:09:34 +01:00
Cenk Gündoğan
86fcc35994
Merge pull request #13423 from kaspar030/turn_on_native_debug
...
native: turn on creation of debug symbols (CFLAGS += -g)
2020-02-20 18:20:11 +01:00
dbd865413c
native: turn on creation of debug symbols (CFLAGS += -g)
2020-02-20 17:06:56 +01:00
e324b22c96
Merge pull request #13418 from gschorcht/boards/esp32/fix_btn0_pin
...
boards/esp32: rename BUTTON0_PIN to BTN0_PIN
2020-02-20 14:40:39 +01:00
Gunar Schorcht
6a7ba7ba1a
boards/esp32: rename BUTTON0_PIN to BTN0_PIN
...
Since a number of applications rely on the existence of the BTN0_PIN definition, the BUTTON0_PIN definition has been renamed to BTN0_PIN to make the ESP32 boards compatible with these applications. However, for compatibility with earlier versions, BUTTON0_PIN is still defined as an alias of BTN0_PIN.
2020-02-20 12:14:44 +01:00
Gunar Schorcht
e4b3ce7c91
boards/esp32: remove MCU feature table in doc
...
Instead of using the same MCU feature table in every board documentation, it refers to the MCU documentation. This makes it easier to maintain the MCU feature table.
2020-02-20 08:47:18 +01:00
6182e7c977
boards/nrf52: remove uint8_t cast for GPIO_UNDEF
2020-02-19 19:16:58 +01:00
Benjamin Valentin
3ee7b72431
boards/same54-xpro: don't source peripheral clocks from main clock
...
Use the dedicated 48 MHz clock as a source for the peripheral clocks.
This was already done for I2C to allow it to work despite the 120 MHz
main clock.
Not running the peripherals off the main clock will allow for dynamic
re-clocking of the main clock in the future, without affecting the
operation of the peripherals.
It also gives more flexibility to the main clock selection in general.
2020-02-19 17:52:12 +01:00
Sebastian Meiling
85c01f2ebd
boards: update supported features of pba-d-01-kw2x
2020-02-18 11:42:05 +01:00
Sebastian Meiling
867090c579
boards: update links in doc of pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Sebastian Meiling
a9cb3b637f
boards: add pinout ref for pba-d-01-kw2x
2020-02-18 11:40:34 +01:00
Yegor Yefremov
5cd205dffd
boards/esp32-ttgo-t-beam: correct SX127x chip frequencies
...
According to the datasheet, SX1278 covers frequencies till 525MHz
and hence, cannot be used for the 868/915 MHz band. So swap both
chips.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-02-17 10:15:40 +01:00
