19573: cpu/stm32/periph_dac: small improvements r=maribu a=gschorcht
### Contribution description
This PR provides the following improvements for `periph_dac` on STM32
- Support for `RCC_APB1ENR1_DAC1EN` symbol added.
- For boards that have not connected the V_REF+ pin to an external reference voltage, the VREFBUF peripheral can be used as V_REF+ (if supported) by setting `VREFBUF_ENABLE=1`.
- If the DAC peripheral has a mode register (`DAC_MCR`), it is set to normal mode with buffer enabled and connected to external pin and on-chip peripherals. This allows to measure the current value of a DAC channel with an ADC channel or to use the DAC channel also for other on-chip peripherals.
### Testing procedure
- Green CI
- `tests/periph_dac` should still work for any board supporting the `periph_dac` feature.
### Issues/PRs references
19579: doc/doxygen/src/flashing.md: work around Doxygen bug r=maribu a=maribu
### Contribution description
Doxygen fails to render inline code in headers correctly in the version the CI uses. So, work around the issue by not typestetting `stm32flash` as inline code but as regular text.
19583: tests: move cpu related applications to tests/cpu r=maribu a=aabadie
19584: tests/build_system/external_board_dirs: fix broken symlinks r=maribu a=aabadie
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19565: tests: move core related applications to their own tests/core/ folder r=maribu a=aabadie
19568: tests: move remaining driver related applications to tests/drivers r=maribu a=aabadie
19574: cpu/stm32/periph_gpio: reset PU/PD for ADC channels r=maribu a=gschorcht
### Contribution description
This PR provides a small fix that is relevant when a GPIO has been used as input/output with a pull resistor before it is initialized as an ADC channel.
The PU/PD configuration has to be `0b00` for analog outputs which is corresponds to the reset state. However, if the GPIO is not in the reset state but was used digital input/output with any pull resistor, the PU/PD configuration has also to be reset to use it as ADC channel.
### Testing procedure
- Green CI
- The `periph_adc` test application should still work for any board that supports the `periph_adc` feature.
### Issues/PRs references
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
19564: tests: move all bench applications to their own tests/bench/ folder r=aabadie a=aabadie
19569: tests/lua_loader: move to tests/pkg/lua_loader r=aabadie a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19552: tests: move all periph applications to their own periphs/ folder r=gschorcht a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19522: tests/periph_rtt: Fix for tick conversion test r=benpicco a=chudov
### Contribution description
Type casting and `printf` formatting for the `RTT_MAX_VALUE` and `RTT_FREQUENCY` are fixed so 32-bit value is properly handled by 'avr-libc'.
The original tick conversion test assumes that `RTT_FREQUENCY` is power of 2 so forward and backward ticks to seconds conversion results in the original ticks value. To fix it the result of the forward-backward conversion is compared with `ticktest / RTT_FREQUENCY * RTT_FREQUENCY` that considers rounding errors.
Changes were tested on deRFmega256 and nrf52840dongle.
### Testing procedure
tests/periph_rtt on a board with ATmega256RFR2 shall:
* show correct RTT_MAX_VALUE
* conversion check shall report no error.
### Issues/PRs references
Fixes#15940
Co-authored-by: chudov <chudov@gmail.com>
19368: debug: add DEBUG_BREAKPOINT() macro, set breakpoint on failed assertion r=benpicco a=benpicco
19529: cpu/stm32/periph/dac: optimize setting DAC r=benpicco a=Enoch247
### Contribution description
The current implmentation right shifted the 16 bit value passed into `dac_set()` down to the 12 bits that the DAC is actually capable of. This patch drops the shift and instead writes the 16 bit value to the DAC's left aligned 12 bit wide data holding register.
### Testing procedure
do something like:
``` c
#include "perip/dac.h"
int main(void)
{
dac_set(DAC_LINE(0), 0xffff/2);
return 0;
}
```
- observe DAC's output is half of vref
### Issues/PRs references
- none known
19531: tests/unittests: allow passing `UNIT_TESTS` via env r=benpicco a=kaspar030
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19525: semtech-loramac: extend list of supported radio with sx1261, sx1262 and sx1268 r=maribu a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19346: pkg/tinydtls: allow build for AVR r=benpicco a=benpicco
19512: SUBSYSTEMS.md: add jia200x to subsystems r=benpicco a=jia200x
19513: boards/nrf52840dongle/doc: Update nrfutil pointers r=benpicco a=chrysn
### Contribution description
Nordic changed its nrfutil; this change adjust to it.
I'm not fully happy with recommending that tool at all due to its bad quality (see rambling in https://github.com/RIOT-OS/RIOT/issues/19511), but short of soldering on a debug header or touch-probing it with wires it's the only way in to the device. I may later add follow-up recommendations to switch to riotboot, but this now at least fixes the immediate issue.
### Testing procedure
* Look at the updated documentation.
### Issues/PRs references
Closes: https://github.com/RIOT-OS/RIOT/issues/19511
19514: dist/testbed-support: remove obsolete boards from iotlab archi r=benpicco a=aabadie
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19485: sys/shell: Fix missing dependency r=aabadie a=maribu
### Contribution description
The shell commands depend on the shell module being use. This was already the case in KConfig, but was overlooked in the shell's `Makefile.dep`.
In addition, this uncovered that `tests/memarray` had a bogus dependency on shell commands without every using the shell.
### Testing procedure
Ideally binaries should not differ (except for debug section).
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/19483
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
