benpicco
e38e0b937c
Merge pull request #18835 from gschorcht/pkg/tinyusb_descriptors
...
pkg/tinyusb: add common USB descriptors implementation
2022-11-09 10:42:15 +01:00
Gunar Schorcht
028c22083b
pkg/tinyusb: add Kconfig variables for common tinyUSB descriptors
2022-11-09 06:57:55 +01:00
Gunar Schorcht
ef5c4deb55
pkg/tinyusb: common descriptors implementation
2022-11-09 06:57:55 +01:00
Kevin "Tristate Tom" Weiss
19943d2aa8
Merge pull request #18787 from gschorcht/cpu/stm32/usbdev_synopsys_dwc_dependency
...
cpu/stm32: improvement of USB device driver selection
2022-11-04 07:57:28 +01:00
Gunar Schorcht
112f0c6cfc
pkg/tinyusb: improvement of USB driver selection for STM32
...
There are STM32 families where all models use only the Synopsys DWC2 USB OTG core while others completely use only the USB Device FS core. For these families then either the driver `drivers/usbdev_synopsys_dwc2` or the driver `cpu/stm32/periph/usbdev` is used depending on the respective family. However, the STM32 families F1 and L4 use both cores. The correct driver must therefore be selected depending on the CPU line or CPU model.
2022-11-03 13:56:38 +01:00
chrysn
def30c1d3f
pkg/tinyusb: Note distinction from USBUS
2022-11-02 14:12:33 +01:00
benpicco
55766f28eb
Merge pull request #18781 from gschorcht/pkg/tinyusb_nrf52
...
pkg/tinyusb: add nrf52 support
2022-10-26 11:59:18 +02:00
Gunar Schorcht
e0fb5074a1
pkg/tinyusb: add STM32 FS device support
2022-10-23 22:33:51 +02:00
Gunar Schorcht
e26d8523a4
pkg/tinyusb: add nRF52 support
2022-10-21 18:09:38 +02:00
Gunar Schorcht
eb5035971a
pkg/tinyusb/hw: add UTMI HS PHY for STM32
2022-10-21 11:43:55 +02:00
Gunar Schorcht
8e127644b1
pkg/tinyusb/hw: add ULPI HS PHY for STM32
2022-10-21 11:43:55 +02:00
Gunar Schorcht
98478e02fe
pkg/tinyusb: cleanup of tinyusb_config.h
...
`CFG_TUD_MAX_SPEED` definition isn't required since tinyUSB derives it from `TUD_RHPORT_MODE` if not defined or uses the maximum speed the MCU supports by default.
2022-10-19 18:19:50 +02:00
MrKevinWeiss
aa86460eda
pkg/tinyusb: fix kconfig model
...
The cpus for the sam*xpro series have some differences in make and Kconfig
Kconfig seems to be more verbose and make assumes samr34-xpro just uses saml21
2022-10-10 12:38:54 +02:00
Dylan Laduranty
4e39ba4c7a
boards/sam0-based: enable tinyusb_device support in Kconfig
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2022-10-05 20:14:02 +02:00
Dylan Laduranty
35b5e2556e
pkg/tinyusb: add SAM0-based MCU support
...
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
2022-10-05 19:23:37 +02:00
Gunar Schorcht
bb337cde8e
pkg/tinyusb: use auto_init for tinyusb stack and thread setup
2022-10-04 07:40:18 +02:00
Gunar Schorcht
bb883cdef3
pkg/tinyusb: remove some error checks from Makefiles
...
Some error checks had to be removed to get `make info-boards-supported` working.
2022-10-04 07:40:18 +02:00
Gunar Schorcht
9cf0119233
pkg/tinyusb: add tinyusb_hw_defaults.h for platform specific defaults
2022-10-04 07:40:18 +02:00
Gunar Schorcht
3367b106bb
tests: add tinyUSB CDC and MSC device test application
2022-09-30 19:05:51 +02:00
Gunar Schorcht
629395fd2b
pkg/tinyusb: add STM32 support
2022-09-30 19:05:51 +02:00
Gunar Schorcht
21b3bcd0c0
pkg/tinyusb: add ESP32-S2 and ESP32-S3 support
2022-09-30 19:05:51 +02:00
Gunar Schorcht
136827e6da
pkg: add tinyUSB device/host stack as package
2022-09-30 19:05:51 +02:00
