RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
28,762 Commits 40 Branches 189 Tags 262 MiB
e272cc920b
Commit Graph

5384 Commits

Author SHA1 Message Date
Pekka Nikander
4534e9b773
cpu/cortexm_common: add irq sub-priorities 
This commit enables Cortex-M CPU interrupt sub-priorities
and allows the PendSV interrupt to have a priority different
from the default one.  Together these two preprocessor
defines can be used to have PendSV always run as the last interrupt
before returning from the interrupt stack back to the user space.

Running PendSV as the last interrupt before returning to the
user space is recommended by ARM, as it increases efficiency.
Furthermore, that change enhances stability a lot with the
new nRF52 SoftDevice support, currently being worked in
PR #9473.

This commit merely enables sub-priorities and a separate
PendSV priority to be used without changing the default
RIOT behaviour.
 2020-04-03 17:49:31 +02:00
Benjamin Valentin
01c573c612 cpu/samd21: pwm: allow to use channels > 3 
Channels 4…7 are on the CCB register.
 2020-04-03 01:02:38 +02:00
Benjamin Valentin
49fda3e900 cpu/samd5x: don't run DFLL on-demand 
The DFLL on samd5x has a hardware bug that requires a special
re-enabling sequence when it is disabled and then re-enabled again.

When running the clock on-demand, the hardware handles the disabling
and re-enabling so that sequence does not get executed.

To reproduce, run `tests/periph_uart` on `same54-xpro`.

Without this patch the test will get seemingly stuck on `sleep_test()`.
(In fact it keeps running, but the DFLL has the wrong frequency so the
UART baudrate is wrong).

In this test, on `same54-xpro` only UART0 is sourced from DFLL.
So if the UART is disabled the DFLL will be turned off as well.
 2020-04-02 20:11:41 +02:00
Benjamin Valentin
f037e06b13 cpu/saml21: enable buck voltage regulator when possible 
Switch from the on-chip LDO to the on-chip buck voltage regulator
when not fast internal oscillators are used.

On `saml21-xpro` with `examples/default` this gives

**before:** 750 µA
** after:** 385 µA
 2020-04-02 17:25:16 +02:00
Benjamin Valentin
3f95d3d2e3 cpu/saml21: pm: set deep flag 
Set the deep flag for consistency with other family members.
 2020-04-02 17:25:13 +02:00
Benjamin Valentin
7e156dd2e5 cpu/saml1x, saml2x: PM_NUM_MODES is a valid mode 
The mode PM_NUM_MODES is the IDLE mode, so do not skip it.
 2020-04-01 18:10:23 +02:00
Benjamin Valentin
5d123cbb22 cpu/sam0_common: distribute PM_NUM_MODES among siblings 
Also adapt the defines to the documentation

 - CPUs define up to 4 power modes (from zero, the lowest power mode,
   to PM_NUM_MODES-1, the highest)
 - >> there is an implicit extra idle mode (which has the number PM_NUM_MODES) <<

Previously on saml21 this would always generate pm_set(3) which is an illegal state.
Now pm_layered will correctly generate pm_set(2) for IDLE modes.

Idle power consumption dropped from 750µA to 368µA and wake-up from standby is also
possible. (Before it would just enter STANDBY again as the mode register was never
written with the illegal value.)
 2020-04-01 18:10:23 +02:00
Benjamin Valentin
f6139ae346 cpu/samd5x: work around errata when (re-)initializing DFLL 
When a previously disabled DFLL gets enabled again, the frequency will
be incorrect. Follow the procedure outlined in the errata sheet, section 2.8.3
to work around the issue.

This fixes wake from standby.
 2020-04-01 15:41:20 +02:00
Dylan Laduranty
6bba4188fc
Merge pull request #13764 from benpicco/cpu/saml11/use_buck_converter 
cpu/saml1x: select buck voltage regulator when possible
 2020-04-01 14:47:47 +02:00
Leandro Lanzieri
ea2f963302
cpu/cortexm: Add 'cortexm_fpu' as a DEFAULT_MODULE if possible 
This adds cortexm_fpu to the DEFAULT_MODULE list when the feature
cortexm_fpu is provided by the architecture. It also moves the
dependency resolution of this module to the architecture-specific
Makefile.dep file.
 2020-04-01 09:46:29 +02:00
Leandro Lanzieri
64552a3b9a
cpu/cortexm_common: Move common modules to Makefile.dep 
This moves the following modules to a architecture-specific Makefile.dep
file:
- cortexm_common
- cortexm_common_periph
- newlib
- newlib_nano
- periph
 2020-04-01 09:46:21 +02:00
benpicco
e5562a89a3
Merge pull request #13765 from gschorcht/cpu/esp/fix_netopt_link_type 
cpu/esp: fix type for NETOPT_LINK for esp_wifi/esp_eth
 2020-03-31 21:51:08 +02:00
Gunar Schorcht
579de1a1e7 cpu/esp: deprecated NETOPT_LINK_CONNECTED renamed 2020-03-31 18:11:47 +02:00
Gunar Schorcht
aa3de05601 cpu/esp: fix netopt_enabled_t handling in esp_wifi/esp_eth 2020-03-31 18:11:36 +02:00
Dylan Laduranty
6a788b3c02
Merge pull request #13761 from RIOT-OS/cpu/samd5x/rtc_workaround 
cpu/samd5x: disable RTC on init to prevent undefined RTC state
 2020-03-31 17:25:25 +02:00
Benjamin Valentin
895eb943d8 cpu/sam0_common: add cpu_pm_cb_enter()/leave() 
This allows to implement needed work-arounds surrounding sleep on
a per-MCU basis.
 2020-03-31 17:18:58 +02:00
Benjamin Valentin
005de7024b cpu/saml1x: enable buck voltage regulator 
Switch from the on-chip LDO to the on-chip buck voltage regulator.
 2020-03-31 17:18:58 +02:00
Benjamin Valentin
9b90fd478a cpu/sam0_common: provide function to switch voltage regulator 
Add a fucntion to switch between LDO and Buck concerter to provide the
internal CPU voltage.
The Buck Converter is not compatible with internal fast oscillators (DFLL, DPLL)
and requires an inductivity to be present on the board.
 2020-03-31 17:18:20 +02:00
Francisco
1a8b35f54b
Merge pull request #13377 from leandrolanzieri/pr/kconfig_migrate/drivers/periph_wdt 
drivers/periph/wdt: Expose configurations to Kconfig
 2020-03-31 16:36:36 +02:00
Dylan Laduranty
783ffdc28a
Merge pull request #13607 from benpicco/cpu/sam0_common/generic_RAM_ROM 
cpu/sam0_common: derive ROM_LEN & RAM_LEN from part number
 2020-03-31 15:55:04 +02:00
Benjamin Valentin
d12abe6a2b cpu/samd5x: disable RTC on init to prevent undefined RTC state 
When changing the clock configuration while the RTC is running, the
RTC may end up in an undefined state that leaves it unresponsive.

The RTC is not reset to stay persistent across reboots/hibernate, so
it will not be reset on init.
Instead, disable the RTC while configuring the clocks, rtc_init() will
take care of re-enabling it.

@dylad introduced this workaround for saml21, samd5x needs it too.

To reproduce, set the CLOCK_CORECLOCK of a samd5x board (e.g. same54-xpro)
to 48 MHz.
Run any RTC application. The CPU will be stuck in _wait_syncbusy() after
a reboot.
This patch will fix this. (You will need to power-cycle the board if the
RTC has entered the stuck state as it will never be reset.)
 2020-03-31 15:34:55 +02:00
benpicco
97acdd94c5
Merge pull request #13677 from gschorcht/cpu/esp/esp_wifi/modem_sleep 
cpu/esp_common: allow WiFi modem sleep mode
 2020-03-31 14:15:06 +02:00
Leandro Lanzieri
f69427fcf7
cpu/saml1x: Add Kconfig file 2020-03-31 13:39:41 +02:00
Leandro Lanzieri
218f7bfe0c
cpu/saml21: Add Kconfig file 2020-03-31 13:39:41 +02:00
Leandro Lanzieri
daf38f2500
cpu/samd5x: Add Kconfig file 2020-03-31 13:39:40 +02:00
Leandro Lanzieri
c43543c21a
cpu/samd21: Add Kconfig file 2020-03-31 13:39:40 +02:00
Leandro Lanzieri
cf53a86308
cpu/sam0_common: Add CPU-specific WDT peripheral configuration 2020-03-31 13:39:39 +02:00
Leandro Lanzieri
00b71a2708
drivers/wdt: Move WDT_WARNING_PERIOD to 'CONFIG_' namespace 2020-03-31 13:39:37 +02:00
Gunar Schorcht
1505c105d2 cpu/esp32: allow WiFi modem sleep 
Due to stability reasons, the SoftAP interface of the WiFi module was always enabled in former versions even if only the station interface was used. Therefore the WiFi modem had to be always active and the SoC could not enter the modem sleep mode. Therefore, the SoftAP interface is only enabled when ESP-NOW is used.
 2020-03-31 13:17:23 +02:00
Alexandre Abadie
934f68ead8
Merge pull request #13094 from francois-berder/pic32-uart-3 
UART RX implementation on PIC32 devices
 2020-03-31 10:45:43 +02:00
benpicco
7e85081ddc
Merge pull request #13748 from gschorcht/cpu/esp32/fix_wake_up_sources 
cpu/esp32: fix wake-up sources for sleep modes
 2020-03-29 17:38:54 +02:00
Gunar Schorcht
85b18a1c10 cpu/esp32: fix wake-up sources for sleep modes 
When entering a sleep mode, all wake-up sources should first be disabled before the wake-up sources required for the sleep mode are then stepwise enabled again. Otherwise, an wake-up configuration of one sleep mode may affect the wake-up within another sleep mode.
 2020-03-29 12:55:50 +02:00
benpicco
ad81a88bf0
Merge pull request #13676 from gschorcht/cpu/esp/netopt_channel 
cpu/esp: add NETOPT_CHANNEL for esp_wifi and esp_now
 2020-03-27 16:37:41 +01:00
Alexandre Abadie
42a544bc6a
cpu/stm32l4/wb: ensure LPTIM clock source is correctly reset 2020-03-27 10:57:49 +01:00
Vincent Dupont
08286f7e41
cpu/stm32_common: enable EXTI interrupt for rtt 2020-03-27 10:57:49 +01:00
Alexandre Abadie
c86dcd4611
Merge pull request #10075 from dylad/saml21_dfll_support 
cpu/saml21: add DFLL support
 2020-03-27 10:24:59 +01:00
Gunar Schorcht
42ff700df5
Merge pull request #13728 from maribu/esp32_python3 
cpu/esp_common: Use python3 instead python
 2020-03-26 21:57:14 +01:00
dylad
f2afcd171b cpu/saml21: add DFLL48M support 2020-03-26 18:03:02 +01:00
Marian Buschsieweke
bcaacc8fa5
cpu/esp_common: Use python3 instead python 2020-03-26 15:10:28 +01:00
Gunar Schorcht
f90d230b00 cpu/esp: set NETOPT_CHANNEL for esp_wifi/esp_now 2020-03-26 14:47:41 +01:00
Gunar Schorcht
331313db4f cpu/esp: NETOPT_CHANNEL for esp_wifi and esp_now 2020-03-26 14:46:15 +01:00
Martine S. Lenders
62d48d5bf3
gnrc_netif: document new *_create() out parameter as such 2020-03-26 14:37:44 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc 
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
 2020-03-26 14:30:44 +01:00
Jose Alamos
67ed9defbe gnrc_netif_xxx_create: use external netif allocation 2020-03-26 11:12:23 +01:00
Alexandre Abadie
0bb3304df3
native: don't export NATIVEINCLUDES 2020-03-26 10:25:49 +01:00
Leandro Lanzieri
11f4091b94
Merge pull request #13718 from gschorcht/cpu/esp32/dependency_cleanup 
cpu/esp32: use conditional expansion for INCLUDES and esp_eth
 2020-03-26 09:28:47 +01:00
Gunar Schorcht
9b342432c4 cpu/esp32: use conditional expansion for INCLUDES and esp_eth 2020-03-26 01:41:36 +01:00
Francisco Molina
dcd6b7f226
cpu/cc2538/timer: fix GPT enabling wait 2020-03-25 20:16:23 +01:00
Francois Berder
8f1c8298f3 cpu: mips_pic32_common: Use mips32r2_isr_end in timer interrupt handler 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
7bbf21e2d3 cpu: mips32r2_common: Implement mips32r2_isr_end 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
cbb0247f26 cpu: mips_pic32_common: Implement pm_reboot 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
847fedc754 cpu: mips_pic32_common: Handle UHI read 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
83beabe303 cpu: mips32r2_common: Add missing __isr_vec functions 
This file used to be part of the toolchain (at least in 2016.05-03
version) but is not part of the current MIPS toolchain (2018-09-03).

Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
8775254755 cpu: mips_pic32_common: Refactor UART 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
7979ce57f5 cpu: mips_pic32_common: Define uart_conf_t structure 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
aeee8f8fba cpu: mips_pic32_common: Define gpio_af enum 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
535fff26ae cpu: mips: Refactor EIC 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
f816584213 cpu: mips_pic32_common: Add CPU_FAM macro to CFLAGS 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
d8a3ac335a cpu: mips_pic32mz: Define CPU_ARCH and CPU_FAM 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Francois Berder
a06b27ba16 cpu: mips_pic32mx: Define CPU_ARCH and CPU_FAM 
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
 2020-03-25 19:10:01 +00:00
Benjamin Valentin
77961106f9 cpu/sam0_common: derive ROM_LEN, RAM_LEN from part number & vendor file 
The ROM size is encoded in the part number of the Atmel SAM chips.
RAM size is not encoded directly, so get it by parsing the chip's vendor file.

The file remains in the page cache for the compiler to use, so the overhead
should be minimal:

on master:

  Benchmark #1: make BOARD=samr21-xpro -j
    Time (mean ± σ):     527.9 ms ±   4.9 ms    [User: 503.1 ms, System: 69.6 ms]
    Range (min … max):   519.7 ms … 537.2 ms    10 runs

with this patch:

  Benchmark #1: make BOARD=samr21-xpro -j
    Time (mean ± σ):     535.6 ms ±   4.0 ms    [User: 507.6 ms, System: 75.1 ms]
    Range (min … max):   530.6 ms … 542.0 ms    10 runs
 2020-03-25 15:07:50 +01:00
benpicco
e9b71254ff
Merge pull request #13694 from fjmolinas/pr_boards_common_cc2538 
boards: add common cc2538
 2020-03-25 11:11:50 +01:00
Francisco Molina
c6e0e7adcb
cpu/stm32_common: add common L4 and WB stmclk 2020-03-25 09:29:57 +01:00
Francisco Molina
9fa0099d62
cpu/stm32wb: add flashpage support 
- Since flash access is shared with CPU2 we resize ROM_LEN
  according to CPU2 secure flash memmory area.
- Add assert to prevent unauthorized reads from CPU2 secure
  flash area
 2020-03-25 09:29:56 +01:00
Francisco Molina
66a8922f8c
cpu: initial support for stm32wb 2020-03-25 09:29:56 +01:00
Francisco Molina
0ee04bd6d6
cpu/stm32wb: add stm32wb55xx.h vendor file 2020-03-25 09:28:26 +01:00
Francisco Molina
194af687a0
boards/common: add cc2538 2020-03-25 08:20:52 +01:00
Koos
575a9e9579 cpu/stm: Fix broken character encoding 2020-03-24 16:07:19 +01:00
Kaspar Schleiser
fc6b586919
Merge pull request #13586 from bergzand/pr/nrf/dcdc 
nrf5x: Add and enable configuration for the built-in DC/DC converter
 2020-03-24 11:56:40 +01:00
Gunar Schorcht
c8a2ff2406
Merge pull request #13685 from leandrolanzieri/pr/esp/cleanup_makefile_dep_include 
cpu/esp[32, 8266, _common]: Move dependency resolutions to Makefile.dep
 2020-03-24 11:22:08 +01:00
Leandro Lanzieri
58320c943e
cpu/esp8266: Move common modules fo Makefile.dep 2020-03-24 09:27:40 +01:00
Leandro Lanzieri
afc0ad4d57
cpu/esp_common: Set RIOT_TEST_TIMEOUT with conditional expansion 2020-03-24 09:27:40 +01:00
Leandro Lanzieri
56972af3b4
cpu/esp_common: Don't increase GNRC_NETIF_NUMOF on Makefile 2020-03-24 09:27:30 +01:00
Leandro Lanzieri
939a10813b
cpu/esp_common: Check for esp_spi_ram with conditional expansion 2020-03-24 09:21:23 +01:00
Leandro Lanzieri
fcfc15e199
cpu/esp: Move dependency resolution of esp_log_startup to Makefile.dep 2020-03-24 09:21:21 +01:00
Leandro Lanzieri
e61532efbe
cpu/esp: Move dependency resolution of esp_log_colored to Makefile.dep 2020-03-24 09:21:21 +01:00
Leandro Lanzieri
f918b97ec3
cpu/esp: Move dependency resolution of esp_gdb to Makefile.dep 2020-03-24 09:21:20 +01:00
Leandro Lanzieri
7a30795a8c
cpu/esp: Move esp_[wifi/now] dependency resolution to Makefile.dep 2020-03-24 09:21:20 +01:00
Leandro Lanzieri
ab1f88c69a
cpu/esp: Evaluate esp_[wifi/now] modules with conditional expansion 2020-03-24 09:21:20 +01:00
Leandro Lanzieri
48a62dcc8f
cpu/esp: Move common dependencies to Makefile.dep 2020-03-24 09:21:19 +01:00
Leandro Lanzieri
ea12a6b493
cpu/esp8266/Makefile.include: Check modules in conditional expansion 2020-03-24 09:21:18 +01:00
Leandro Lanzieri
881d245932
cpu/esp32: Evaluate esp_[now/wifi] modules with conditional expansion 2020-03-24 09:21:18 +01:00
Leandro Lanzieri
2f158d7d19
cpu/esp32: Evaluate cpp FEATURE with conditional expansion 2020-03-24 09:21:17 +01:00
benpicco
457c5245ce
Merge pull request #13507 from benpicco/cpu/cc2538-gpio-cycles 
cpu/cc2538: gpio: save a few cycles in handle_isr()
 2020-03-23 20:53:52 +01:00
Leandro Lanzieri
05c37edd42
cpu/esp32: Move default modules to Makefile.dep 2020-03-23 15:49:30 +01:00
Leandro Lanzieri
2b8976d935
cpu/esp32: Use periph_adc_ctrl as feature 2020-03-23 15:47:26 +01:00
Leandro Lanzieri
584d03aae0
cpu/esp32: Remove special module dependency resolution 2020-03-23 15:46:27 +01:00
Leandro Lanzieri
fa419ecf8e
cpu/esp32: Use cpp FEATURE in Makefile.include 2020-03-23 15:46:27 +01:00
Jean Pierre Dudey
ffa5005021
cc26xx_cc13xx: add API to manage peripheral clocks 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-23 09:33:53 -05:00
Jean Pierre Dudey
c6e4768997
cc26xx_cc13xx: add PRCM_NONBUF register bank 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-23 09:33:23 -05:00
Jean Pierre Dudey
7ac28c82b1
cc26x0: enable serial domain only once 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-23 09:33:23 -05:00
Jean Pierre Dudey
4643ed5733
cc26xx_cc13xx: add power abstraction 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-23 09:33:22 -05:00
benpicco
45b635f4c5
Merge pull request #13416 from gschorcht/cpu/esp32/pm_layered 
cpu/esp32: support for light/deep sleep and pm_layered
 2020-03-23 14:11:05 +01:00
benpicco
08afe95572
Merge pull request #13647 from btcven/2020_03_16-new-definitions 
cc26xx_cc13xx: add RF related registers definitions
 2020-03-23 12:48:38 +01:00
Gunar Schorcht
4f977316fe cpu/esp_common: stop WiFi interface before sleep/reboot 
The WiFi interface should be stopped before reboot or sleep. But stopping the WiFi interface disconnects an existing connection. Usually, esp_wifi_netdev tries to reconnect on an disconnect event. However, trying reconnect with a stopped WiFi interface may lead to a crash. Therefore, the stop event has to be handled.
 2020-03-23 12:38:36 +01:00
Gunar Schorcht
09899e4b8d cpu/esp32/periph_gpio: funcs for enter/exit sleep 2020-03-23 12:38:36 +01:00
Gunar Schorcht
f4aa253645 cpu/esp32/periph_rtc: funcs for enter/exit sleep 2020-03-23 12:38:36 +01:00
Gunar Schorcht
dff74a3278 cpu/esp32: add pm_layered support 2020-03-23 12:38:36 +01:00
Gunar Schorcht
5ec4113893 cpu/esp32: several small doc fixes 2020-03-23 12:25:47 +01:00
Gunar Schorcht
a7652df499 cpu/esp32: function to set gpio drive strength 2020-03-23 12:25:47 +01:00
Gunar Schorcht
15ea6feeaf cpu/esp32: use hibernate mode for pm_off 
Now, where the vendor files for light/deep sleep mode are added, function `pm_off` does not need to implement this mode by itself. Instead the existing deep sleep with disabled wakeup sources is used for pm_off.
 2020-03-23 12:25:47 +01:00
Gunar Schorcht
3faf99a894 cpu/esp32: add vendor files for light/deep sleep 2020-03-23 12:25:47 +01:00
Francisco Molina
0cc6a51ea8
cpu/cc2538/periph/timer: cleanup styling 2020-03-23 10:59:53 +01:00
Francisco Molina
7e913fe0d9
cpu/cc2538/periph/timer: set pending timer_set_absolute 
GPT timer needs to be gated to write to TnMATCHR register. If set
when timer is stopped save values and set on next timer_start()
 2020-03-23 10:59:30 +01:00
Francisco Molina
ce696c6caa
cpu/cc2538/timer: enable GPT clock in active, sleep and PM0 2020-03-23 10:58:56 +01:00
Benjamin Valentin
345827ce7b cpu/cc2538: gpio: save a few cycles in handle_isr() 
If only one it is set in state (one GPIO pin caused an interrupt),
don't loop over all 8 bits.

Use clz to get the position of the first interrupt bit and clear it,
looping only as many times as there are actual interrupts.
 2020-03-23 09:21:14 +01:00
Francisco
5ef0cb9c18
Merge pull request #13534 from Ciusss89/stm32l4_can_dev_MASTER 
Add CAN support for nucleo-l476rg
 2020-03-23 09:10:56 +01:00
Gunar Schorcht
2cbf90d9fe cpu/esp32: small fix of rtc_init for light sleep 
`rtc_init` is used after light sleep to update the system time from RTC timer. The fix corrects a small difference of about 230 ms which would sum up with each wakeup from light sleep.
 2020-03-22 23:53:02 +01:00
Gunar Schorcht
825b01e8e1 cpu/esp32: remove gpio_config_sleep_mode func 
The function were used to set the GPIO pads in sleep mode. This function isn't required for deep or light sleep.
 2020-03-22 23:53:02 +01:00
benpicco
921a6a663e
Merge pull request #12024 from gschorcht/cpu/esp32/esp_wifi/wpa2_enterprise 
cpu/esp32/esp wifi: add WPA2 enterprise mode with IEEE 802.1x/EAP authentication
 2020-03-22 17:10:31 +01:00
Giuseppe Tipaldi
7e6ce086b8 cpu: stm32_common: add CAN support for nucleo-l476rg 
STM32L4 CAN implementation:
 - STM32L47x/L48x has single CAN
 - STM32L49x/4Ax has dual CAN
 2020-03-22 16:53:48 +01:00
Gunar Schorcht
c1e6e70015 cpu/esp32/esp_wifi: doc for WPA2 Enterprise mode 2020-03-22 15:47:06 +01:00
benpicco
1e38a3da63
Merge pull request #13673 from fjmolinas/pr_cc2538_cleanups 
cpu/cc2538: clock cleanups
 2020-03-21 22:24:48 +01:00
Francisco Molina
9a2190cd24
cpu/cc2538/periph/pm: unset OSC_PD when running on 32Mhz 
Setting OSC_PD before WFI allows for faster wakeup from sleep.

Wait for cc2538_sys_ctrl_clk_sta and not cc2538_sys_ctrl_clk_ctrl
to be set.
 2020-03-21 19:32:24 +01:00
Francisco Molina
8c35335668
cpu/cc2538/cpu: cleanup clock intialization 2020-03-21 19:32:22 +01:00
benpicco
5aff374f3d
Merge pull request #13670 from gschorcht/cpu/esp8266/add_rtt_based_rtc 
cpu/esp8266: add RTT based RTC
 2020-03-21 13:29:48 +01:00
Gunar Schorcht
b7781c77d6 cpu/esp8266: add RTT based RTC 
fixup! cpu/esp8266: add RTT based RTC
 2020-03-21 08:49:51 +01:00
Marius
aae86e860f
cpu/stm32l4: add support for STM32L412KB 2020-03-20 18:48:31 +01:00
Francisco
b98e4bf0d1
Merge pull request #13658 from fjmolinas/pr_periph_timer_cc2538 
cpu/cc2538: fix GPT3 IRQ definition
 2020-03-20 14:31:05 +01:00
benpicco
829671d504
Merge pull request #13640 from gschorcht/cpu/esp8266/periph_rtt 
cpu/esp8266: add RTT implementation
 2020-03-19 17:42:20 +01:00
Gunar Schorcht
df19c6d1b4
Merge pull request #13519 from benpicco/rtt_rtc 
drivers/rtt_rtc: add RTT based RTC implementation, enable it for cpu/cc2538, nrf5x_common
 2020-03-19 17:18:43 +01:00
Francisco Molina
226e1b5daf
cpu/cc2538: fix GPT3 timer IRQ definition 2020-03-19 16:31:57 +01:00
Benjamin Valentin
f8d61edba0 cpu/nrf5x_common: use RTT based RTC implementation 2020-03-19 15:25:14 +01:00
Benjamin Valentin
f9346e1e2b cpu/cc2538: use RTT based RTC implementation 2020-03-19 15:25:14 +01:00
Gunar Schorcht
4ac8f8df4c
Merge pull request #13646 from benpicco/BACKUP_RAM 
cpu: add BACKUP_RAM attribute
 2020-03-19 15:09:30 +01:00
Gunar Schorcht
464e3a8741 cpu/esp8266: add RTT implementation 2020-03-19 13:59:58 +01:00
Benjamin Valentin
69551d4a74 cpu/lpc2387: define BACKUP_RAM attribute 2020-03-19 13:38:50 +01:00
Benjamin Valentin
b8e18d521f cpu/esp32: define BACKUP_RAM attribute 2020-03-19 13:37:58 +01:00
Benjamin Valentin
a11bcdcd5c cpu/cortexm_common: define BACKUP_RAM attribute 2020-03-19 13:37:58 +01:00
Gunar Schorcht
920d54b226 cpu/esp32/esp_wifi: integrate WPA2 Enterprise mode 2020-03-17 17:51:29 +01:00
Gunar Schorcht
ae647ed95f cpu/esp32/esp_wifi: Makefile integration for WPA2 Enterprise mode 2020-03-17 17:51:29 +01:00
Francisco
d77ecc1cde
Merge pull request #13598 from benpicco/cpu/cc2538-spi-fix 
cpu/cc2538: fix spi_transfer_bytes()
 2020-03-17 17:29:49 +01:00
Jean Pierre Dudey
f1af3ae043
cc26x0: add AON_RTC definitions 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-16 19:36:54 -05:00
Jean Pierre Dudey
1bb689ff45
cc26x2_cc13x2: add AON_RTC definitions 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-16 19:36:54 -05:00
Jean Pierre Dudey
20439cc3cc
cc26xx_cc13xx: add RFC_DBELL/RFC_PWR definitions 
This definition is compatible with `cc26x0` and `cc26x2_cc13x2`.

The only difference is (cc26x0 -> cc26x2_cc13x2):

- IRQ13 -> FG_COMMAND_STARTED
- IRQ12 -> COMMAND_STARTED

Those IRQs aren't used on cc26x0 radio so it shouldn't affect anything.
 2020-03-16 19:36:54 -05:00
Jean Pierre Dudey
ec4fccb3f7
cc26xx_cc13xx: add PERIPH_BASE_NONBUF 
Signed-off-by: Jean Pierre Dudey <jeandudey@hotmail.com>
 2020-03-16 19:30:31 -05:00
Kaspar Schleiser
7be303f12f
Merge pull request #7583 from haukepetersen/add_sam3_rtt 
cpu/sam3: added RTT driver
 2020-03-12 21:30:05 +01:00
Martine Lenders
5defa1ae34
Merge pull request #13466 from gschorcht/fix_compilation_with_ndebug 
tests: fix compilation problems with NDEBUG
 2020-03-12 19:34:33 +01:00
Gunar Schorcht
b7b244b6d9 cpu/stm32_common: fix NDEBUG compile problem 2020-03-12 18:04:42 +01:00
Gunar Schorcht
b2356d29c5 cpu/nrf51: fix NDEBUG compile problem 2020-03-12 18:04:42 +01:00
benpicco
d5c7d28b38
Merge pull request #10745 from kaspar030/make_idle_stacksize_configurable 
cpu: make default idle/main stacksizes configurable on all archs
 2020-03-12 14:38:32 +01:00
Kaspar Schleiser
b0e7d6abd6 cpu/atmega32u4: make THREAD_STACKSIZE_IDLE configurable 2020-03-12 13:35:43 +01:00
Kaspar Schleiser
c86ccfcf67 cpu: esp32: make THREAD_STACKSIZE_IDLE/DEFAULT configurable 2020-03-12 13:01:13 +01:00
Kaspar Schleiser
84745365fd cpu: atmega_common: make THREAD_STACKSIZE_IDLE configurable 2020-03-12 13:01:13 +01:00
Kaspar Schleiser
14ed03074e cpu: lpc2387: make THREAD_STACKSIZE_IDLE configurable 2020-03-12 13:01:13 +01:00
benpicco
5d038a24bf
Merge pull request #13510 from benpicco/cpu/cc2538-pm 
cpu/cc2538: implement periph/pm
 2020-03-12 12:18:18 +01:00
benpicco
52cc02c9a9
Merge pull request #13387 from nmeum/mpu_noexec_ram_ng 
Add optional support for executable space protections
 2020-03-11 20:00:44 +01:00
Hauke Petersen
ea2910e2f4 cpu/sam3: add periph_rtt driver implementation 2020-03-11 12:53:20 +01:00
Hauke Petersen
e5d940fce8 cpu/sam3: add opt to use external 32khz oscillator 2020-03-11 12:53:04 +01:00
Alexandre Abadie
79431878ac
Merge pull request #13051 from dylad/pr/uart_hw_fc 
cpu/uart: create common uart hw fc module
 2020-03-10 16:41:36 +01:00