Vincent Dupont
e06993e913
pkg/cmsis-dsp: include cpu_conf.h for __FPU_PRESENT define
2019-01-03 16:06:30 +01:00
Vincent Dupont
402b60e30c
tests: add thread_float test app
2019-01-03 16:06:30 +01:00
Vincent Dupont
06f0c14460
cortexm_common: enable FPU on cortex-m4f
2019-01-03 15:24:20 +01:00
bc5e3e7721
Merge pull request #10213 from kYc0o/pr/stm32l152_add_second_bank
...
boards/common: change openocd config file for stm32l1x
2019-01-03 13:31:04 +01:00
Kevin "Bear Puncher" Weiss
d9f26dbbe2
Merge pull request #10636 from aabadie/pr/cpu/nrf5x_gpio_common
...
cpu/nrf5x: move periph_gpio/periph_gpio_irq at an even more common level
2019-01-03 11:37:48 +01:00
Kevin "Bear Puncher" Weiss
e4ed9d703d
Merge pull request #10118 from aabadie/pr/tests/sx127x_default_board
...
tests/sx127x: set b-l072z-lrwan1 as default board
2019-01-03 11:35:49 +01:00
0d4b55e0c8
Merge pull request #10654 from keestux/driver-rn2xx3-rx1delay
...
loramac: change rxdelay1 to millisec, was seconds
2019-01-03 11:24:17 +01:00
0ca4703dde
Merge pull request #10687 from kb2ma/nanocoap/remove_macro
...
net/nanocoap: remove obsolete macro
2019-01-03 11:00:52 +01:00
José Alamos
f14d46d935
Merge pull request #10242 from miri64/gnrc_ipv6_ext_rh/enh/icmpv6_error_msg
...
gnrc_ipv6_ext_rh: add ICMPv6 error message sending
2019-01-03 10:35:54 +01:00
Kevin "Bear Puncher" Weiss
2bf29dd99e
Merge pull request #10692 from aabadie/pr/boards/nucleo-f767_i2c
...
boards/nucleo-f767zi: use common STM32 i2c configuration
2019-01-03 10:17:44 +01:00
552909cf90
Merge pull request #10694 from MrKevinWeiss/pr/bh1750fix
...
drivers/bh1750: Fix mislabeled i2c address
2019-01-03 09:50:56 +01:00
Kevin "Bear Puncher" Weiss
fd15cb8f77
Merge pull request #10646 from aabadie/pr/boards/nucleo-f072-i2c
...
boards/nucleo-f072rb: configure I2C using common stm32 configuration
2019-01-03 09:48:57 +01:00
MrKevinWeiss
b870dbb3b9
drivers/bh1750: Fix mislabeled i2c address
...
The i2c address when the pin is high/low are swapped.
This swaps them to match the datasheet and changes the default to low.
2019-01-03 09:08:31 +01:00
Kevin "Bear Puncher" Weiss
90b5865692
Merge pull request #10691 from aabadie/pr/boards/stm32_useless_defines
...
boards/stm32: remove useless empty conf defines
2019-01-02 17:00:30 +01:00
c0b1d37d73
boards/nucleo-f072rb: use common i2c configuration
2019-01-02 16:08:56 +01:00
f6985c5b31
cpu/stm32f0: update stm32f072xb CMSIS header
2019-01-02 16:08:56 +01:00
402f02d471
boards/nucleo-f767zi: use STM32 common i2c config
2019-01-02 16:06:34 +01:00
9a61febf5c
cpu/stm32f7: update stm32f767zi cmsis header file
2019-01-02 16:06:34 +01:00
Kevin "Bear Puncher" Weiss
24837e9f17
Merge pull request #10690 from aabadie/pr/boards/stm32_common_i2c_f0_f2
...
boards/stm32: factorize i2c configuration on stm32f0 and stm32f2 based nucleo boards
2019-01-02 16:05:36 +01:00
Kevin "Bear Puncher" Weiss
5fd304b5f5
Merge pull request #10588 from aabadie/pr/tests/bench_coreapis_pexpect_fix
...
tests/bench_runtime_coreapis: improve pexpect autotest
2019-01-02 15:06:51 +01:00
9a69c9bbc5
boards/stm32: remove useless empty conf defines
2019-01-02 14:52:38 +01:00
3eba44a660
boards/nucleo-f0207zg: use common clock and i2c configuration
2019-01-02 14:29:26 +01:00
24bc5ae254
boards/nucleo-f0xx: use common i2c configuration
2019-01-02 14:23:46 +01:00
541fc7f93f
boards/stm32: add f2 common clock configuration
2019-01-02 14:23:46 +01:00
f90c69cf6e
tests/bench_runtime_coreapis: improve pexpect autotest
2019-01-02 14:22:37 +01:00
4e7bfb65df
tests/bench_runtime_coreapis: globally import testrunner
2019-01-02 14:22:28 +01:00
Kevin "Bear Puncher" Weiss
02ec3845de
Merge pull request #9728 from aabadie/pr/boards/stm32_common_i2c
...
boards: factorize some nucleo f4/f7/l4 i2c configuration
2019-01-02 14:05:32 +01:00
536e4a55a8
boards/nucleo-l496zg: provide and configure i2c
2019-01-02 11:27:42 +01:00
ed6dcfe872
boards/nucleo-f746zg: provide and configure i2c
2019-01-02 11:27:25 +01:00
4fd4ce4c54
boards/nucleo-f722/l476: use common i2c configuration
2019-01-02 11:26:54 +01:00
f8d8ddb1ef
boards/stm32: adapt common i2c config to f7 and l4
2019-01-02 11:25:32 +01:00
0d6af64a15
Merge pull request #10647 from aabadie/pr/boards/nucleo-l422rc-i2c
...
boards/nucleo-l433rc: add I2C configuration
2019-01-02 11:01:17 +01:00
b81941f953
boards/nucleo-f4**: use common clock and I2c configuration
2019-01-02 10:30:13 +01:00
08608c350c
boards/stm32: add common I2C configuration
...
This configuration provides 1 I2C using I2C1 on PB8 and PB9, which is very common for STMs
2019-01-02 10:30:13 +01:00
11da5036fb
boards/stm32: add new common clock configurations
2019-01-02 10:30:13 +01:00
824201b9ea
boards/nucleo-l433rc: add I2C configuration
2019-01-02 10:19:46 +01:00
Kevin "Bear Puncher" Weiss
7f179cd0bf
Merge pull request #10689 from aabadie/pr/boards/st_adc_numof_cleanup
...
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 10:10:29 +01:00
973a6a4c93
boards/stm32: remove unnecessary ADC defines in board config
2019-01-02 09:15:22 +01:00
Ken Bannister
c17cf650ca
net/nanocoap: remove obsolete macro
2018-12-31 07:17:29 -05:00
Gunar Schorcht
d3f78a5a40
Merge pull request #10679 from miri64/gnrc_sixlowpan_frag/fix/send-check-msg-queue
...
gnrc_sixlowpan_frag: check if own message queue is full
2018-12-30 15:48:26 +01:00
Gunar Schorcht
934c4225d2
Merge pull request #10680 from miri64/gnrc_sixlowpan_frag/fix/rbuf-full-release
...
gnrc_sixlowpan_frag: release packet rbuf_add error cases
2018-12-30 15:47:59 +01:00
Martine Lenders
e8da744e6d
gnrc_sixlowpan_frag: release packet when frag hdr can't be marked
...
Otherwise, there will be leaks ;-).
2018-12-30 01:05:34 +01:00
Martine Lenders
a409603f84
gnrc_sixlowpan_frag: release packet when rbuf is full
...
Otherwise, there will be leaks ;-).
2018-12-30 00:59:04 +01:00
Martine Lenders
9e3cdebae1
gnrc_sixlowpan_frag: check if own message queue is full
...
When issueing the sending of the next fragment the current version of
`gnrc_sixlowpan_frag` doesn't check if the queue is full. This leads to
leakage of the packet buffer, since when it is full, the package never
gets released.
This change adds a checks and error exits in case the queue is full.
2018-12-29 22:54:52 +01:00
Martine Lenders
d5bbf45d32
gnrc_sixlowpan_frag: reduce code duplication in send
2018-12-29 22:54:14 +01:00
Gunar Schorcht
a87c2c9563
Merge pull request #10675 from miri64/dist/enh/print-toolchain-version-xtensa
...
print_toolchain_versions.sh: add xtensa toolchains
2018-12-29 15:44:44 +01:00
Martine Lenders
4887b22ef5
print_toolchain_versions.sh: add xtensa newlibs
2018-12-29 15:26:36 +01:00
Martine Lenders
fa3d617e2e
Merge pull request #10657 from maribu/netdev_driver_pre
...
netdev_driver_t::recv(): Clarified documentation
2018-12-29 14:34:42 +01:00
Martine Lenders
745574266c
print_toolchain_versions.sh: add xtensa toolchains
2018-12-29 14:28:08 +01:00
Martine Lenders
7bdbd163c9
print_toolchain_versions.sh: make lists easily diff-able
2018-12-29 14:27:35 +01:00
