19593: boards/msb-430: add documentation r=maribu a=maribu
### Contribution description
This adds basic documentation, schematics, pinouts, and info how to get started with the `msb-430` board.
19597: sys/shell: Add coreclk command to shell_cmd_sys r=maribu a=maribu
### Contribution description
The coreclk shell command now prints the CPU frequency in Hz, which can be useful for boards with RC generated CPU frequency (e.g. RP2040, FE310, or MPS430Fx1xx MCUs allow this) which may quite a bit off the target frequency.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Provide a common clock initialization driver rather than leaving
clock initialization to the boards code. A declarative description of
the board's clock configuration using a struct does still allow to
fine-tune settings. In addition, a board is still allowed to just
provide a custom `void clock_init(void)` if there really is the need
to do crazy things.
19552: tests: move all periph applications to their own periphs/ folder r=gschorcht a=aabadie
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19548: boards/telosb: minor clean ups r=maribu a=maribu
### Contribution description
This cleans up the documentation and the header files of the TelosB board. It is supposed to not changed the generated firmware (except for debug symbols).
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19523: boards/iotlab-m3: enable l3g4200d_ng r=benpicco a=benpicco
19527: drivers/sdcard_spi: small cleanup r=benpicco a=gschorcht
### Contribution description
This PR provides a small cleanup:
- the copy of `sdcard_spi_params_t` is removed (commit bfc2a51f70)
- the documentation was changed to fit the 100 characters per line. (commit 36f0162b34)
It is not necessary to hold a complete copy `sdcard_spi_params_t` in the device descriptor. Constant parameters can be used directly from ROM instead. This saves 24 bytes of RAM.
### Testing procedure
Use any board with SD Card SPI interface. The driver test should still work, for example:
```
BOARD=esp32-wrover-kit make -j8 -C tests/driver_sdcard_spi flash term
```
```
main(): This is RIOT! (Version: 2023.07-devel-176-g7213c-drivers/sdcard_spi_cleanup)
SD-card spi driver test application
insert SD-card and use 'init' command to set card to spi mode
WARNING: using 'write' or 'copy' commands WILL overwrite data on your sd-card and
almost for sure corrupt existing filesystems, partitions and contained data!
> init
Initializing SD-card at SPI_0...
[OK]
>
```
### Issues/PRs references
19530: sys/xtimer: add missing "modules.h" include to `xtimer.h` r=benpicco a=kaspar030
19532: tests/unittests: tests-core-mbox: add missing `container.h` include r=benpicco a=kaspar030
19533: core: move macros/math.h to core/lib/include/macros r=benpicco a=kaspar030
19535: nanocoap_sock: defuse nanocoap_sock_get() API footgun r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
19526: boards/arduino-mkrwan1300: update board name to correct one r=aabadie a=FlapKap
Co-authored-by: Kasper Hjort Berthelsen <kasper.berthelsen@hotmail.com>
19516: cpu/rpx0xx: add initial ADC support r=dylad a=dylad
### Contribution description
This PR adds initial support for RP2040 ADC peripheral.
It is rather minimalist, and only use oneshot trigger to perform a single acquisition.
I've tested this PR using a potentiometer connected between GND and 3V3.
GP26, GP27, GP28 has been tested.
### Testing procedure
Select `ADC_RES_12BIT` and flash `tests/periph_adc`
`make BOARD=rpi-pico -C tests/periph_adc`
### Issues/PRs references
None.
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19447: boards/nucleo-f429zi: Provide 2nd timer r=benpicco a=maribu
### Contribution description
- Add a common timer config with two (instead of only one) timer using TIM2 + TIM5
- Mostly copy-pasting the cfg_timer_tim2.h and cfg_timer_tim5.h together
- Make use of that for the `nucleo-f429zi`
### Testing procedure
E.g. `tests/periph_timer`, but also grepping for TIM2 and TIM5 in `boards/nucleo-f429zi/include/periph_conf.h` to detect any conflict e.g. between PWM and timer config.
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19432: boards/esp32: deduplication in common ESP32x board definitions r=benpicco a=gschorcht
### Contribution description
The PR reduced code duplication in `boards/common/esp32*`.
The PR moves the header files from `boards/common/esp32s3/include` that can be used for all types of ESP32x SoCs to a new common ESP32x board definition which is then included by all common ESP32x board definitions.
### Testing procedure
Green CI.
### Issues/PRs references
19461: drivers/enc28j60: fix ISR routine and bth r=benpicco a=peteut
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Alain Péteut <alain.peteut@yahoo.com>
The board uses the USB OTG HS peripheral together with the on-hip FS PHY. Using the `periph_usbdev_hs` module increases the EP data size for the CDC ECM bulk endpoint to 512 bytes, which does not work for the FS interface. Module `periph_usbdev_hs` is therefore not used.
19417: boards/esp32c3-wemos-mini: add support for Wemos ESP32-C3 mini r=benpicco a=gschorcht
### Contribution description
This PR provides the support for the [Wemos ESP32-C3 mini](https://www.wemos.cc/en/latest/c3/c3_mini.html) board.
### Testing procedure
The board should work for provided features.
The board was already tested with:
- [x] `tests/driver_sht3x` using I2C
- [x] `tests/driver_l3gxxxx` using SPI
- [x] `tests/periph_adc`
- [x] `tests/periph_pwm`
- [ ] `tests/driver_ws281x`
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The commit moves the header files from `boards/common/esp32s3/include` that can be used for all types of ESP32x SoCs to a new common ESP32x board module.
