RIOT-OS/RIOT
RIOT-OS/RIOT
1
0
Fork 0
mirror of https://github.com/RIOT-OS/RIOT.git synced 2024-12-29 04:50:03 +01:00
Code Releases Activity
35,802 Commits 40 Branches 189 Tags 262 MiB
c52da5745f
Commit Graph

5313 Commits

Author SHA1 Message Date
MrKevinWeiss
02a2de4916
cpu/stm32: Add Kconfig dependency modeling 2021-07-02 15:11:05 +02:00
Kaspar Schleiser
60ff613270
Merge pull request #16555 from fjmolinas/pr_z1_config_ztimer 
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values
 2021-06-16 08:59:09 +02:00
Francisco
bb86fb0a50
Merge pull request #16554 from fjmolinas/pr_atmega_usec_adjust 
boards/atmega: add USEC_ADJUST values
 2021-06-16 08:56:11 +02:00
Francisco Molina
3269bcef88
boards/common/arduino-atmega: add USEC_ADJUST values 2021-06-15 16:45:34 +02:00
Francisco Molina
01d870dbc7
boards/atmega256rfr2-xpro add USEC_ADJUST values 2021-06-15 16:35:40 +02:00
Francisco Molina
84b37b7212
boards/z1: add CONFIG_ZTIMER_USEC_ADJUST_% values 2021-06-15 16:21:46 +02:00
benpicco
c7d12733ea
Merge pull request #16523 from benpicco/boards/same54-xpro-lock_eui 
boards: lock EUI provider to interface type
 2021-06-15 16:16:12 +02:00
Martine Lenders
38f0e20834
Merge pull request #16276 from fjmolinas/pr_nrf52840_feather_uf2 
board/feather-nrf52840: add uf2 boot loader
 2021-06-15 12:00:07 +02:00
Kaspar Schleiser
beb171de40
Merge pull request #16546 from fjmolinas/pr_kinetis_lptmr_rtt 
cpu/kinetis: use LPTMR as rtt backend
 2021-06-15 11:02:16 +02:00
Francisco Molina
d9ee424b7c
cpu/kinetis: use LPTMR as rtt backend 2021-06-15 08:29:09 +02:00
Benjamin Valentin
204b80c6bf boards/native: lock EUI64 provider to ZEP interface 2021-06-08 14:01:03 +02:00
Benjamin Valentin
c161fd8dbf boards/same54-xpro: lock EUI provider to ethernet interface 
Otherwise the provider can be used for multiple interfaces but only
return a single MAC address for all of them.
 2021-06-08 14:01:03 +02:00
benpicco
88da1421be
Merge pull request #16469 from Franz2000/support-seeeduino-XIAO-board 
boards: Adding board support for the Seeeduino XIAO
 2021-06-08 10:35:26 +02:00
Francisco
6f369f4381
Merge pull request #16331 from fjmolinas/pr_stdio_uart_lpuart 
makefiles/stdio.inc.mk: stdio_uart require uart or lpuart
 2021-06-07 08:33:27 +02:00
Benjamin Valentin
ec397cbc5e boards/samr21-xpro: only configure antenna switch if radio is used 2021-06-03 18:21:45 +02:00
MaestroOnICe
dc8f7912e9 boards: add Seeeduino XIAO 2021-06-02 14:23:55 +02:00
Francisco Molina
2049ab35d3
boards: require lpuart only if stdio_uart is used 2021-06-01 12:39:58 +02:00
Jean Pierre Dudey
628739172b boards/esp32-wrover-kit: add dependency to ILI9341 
When disp_dev is present, pull the ili9341 driver to allow auto-
initialization

Signed-off-by: Jean Pierre Dudey <me@jeandudey.tech>
 2021-05-20 20:00:03 +02:00
Gerson Fernando Budke
8a2c88a808 boards/atxmega-a3bu-xplained: Add spi configuration 
Add J1 header spi configuration.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-05-14 23:26:08 -03:00
Gerson Fernando Budke
8cc9c42d1d boards/atxmega-a1u-xpro: Add spi configuration 
Add EXT-1 spi bus configuration.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-05-14 23:26:08 -03:00
chrysn
855517326a boards/native: Document flashpage support 
This documents the additions of [15935].

[15935]: https://github.com/RIOT-OS/RIOT/pull/15935
 2021-05-11 10:28:03 +02:00
Dylan Laduranty
a1c3782e28
Merge pull request #16446 from ant9000/pr_cpu_saml21_slow_clock_fix_timers 
CPU SAML21: fix timers frequency when using slow clocks
 2021-05-06 20:17:02 +02:00
Ichiro Kuroki
a637caedec boards/arduino-nano-33-iot: resolved SPI and I2C configuration conflict 2021-05-06 06:30:15 +03:00
Antonio Galea
7a253b4b76 boards: use SAM0_GCLK_TIMER for saml21 boards 2021-05-05 10:56:58 +02:00
Kaspar Schleiser
38062c414c
Merge pull request #16426 from fjmolinas/pr_small_test_fixes 
tests: small fixes
 2021-05-04 10:02:09 +02:00
Francisco Molina
d8287eeffc
boards/nucleo-f303k8: remove provided periph_rtc 
This BOARD does not provide an LSE clock, so don't probide rtc.
 2021-05-03 08:29:22 +02:00
iosabi
52107b2416 esp8266: Support UART1 and other UART0 pins. 
The esp8266 CPU has actually two hardware UART peripherals. UART0 is
used by the boot ROM for flashing and serial output during boot,
typically at a baudrate of 74880 bps until the bootloader or application
sets the more standard 115200 baudrate. This UART0 device has two
possible pins for TXD, GPIO1 and GPIO2, which are both set to TXD by the
boot ROM. esp8266 modules will typically have GPIO1 labeled as the TX
pin, but it is possible to use GPIO2 for that purpose even while
flashing the device with esptool.py.

The second device, UART1, also has two options for TXD, GPIO2 and GPIO7,
and only one option for RXD, GPIO8. However, GPIO7 and GPIO8 are used
by the flash internally so those options are not very useful unless
maybe while running from IRAM with the flash disabled, for example for
a debugger over UART1.

This patch allows boards to override UART{0,1}_{R,T}XD in their
periph_conf.h to configure the uart selection. Defining UART1_TX will
make the UART_DEV(1) device available.

Tested with:

```CFLAGS='-DUART1_TXD=GPIO2' make -C tests/periph_uart BOARD=esp8266-esp-12x flash term```

* Connected one USB-UART to the standard GPIO1 and GPIO3 for flashing
  and console. After flashing we see the manual test output at 115200
  bps

* Connected a second USB-UART with RX to GPIO2 running at 74880.

Then run on the first console:
```
> init 1 74880
> send 1 hello
```

The word "hello" appears on the second UART connection.

Note that GPIO2 is used during boot for UART0's TX until the application
or bootloader set it to a regular GPIO, so some boot ROM messages at
74880 bps are visible. After running `init 1 74880` it is set to UART1's
TX.
 2021-05-02 12:27:27 +00:00
Hauke Petersen
674d6521c5 boards/nrf52840dongle: add I2C pin configuration 2021-04-27 13:55:39 +02:00
Hauke Petersen
729387e090 boards/nrf52840: fix SPI pin configuration 2021-04-27 13:55:39 +02:00
Hauke Petersen
96e36995d3 boards/nrf52840dongle: PWM config: fix formatting 2021-04-27 11:35:37 +02:00
Gerson Fernando Budke
a4c5daea3b boards/atxmega-a3bu-xplained: Add i2c configuration 
Add J1 i2c bus configuration.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-04-25 22:06:29 -03:00
Gerson Fernando Budke
084625fa0d boards/atxmega-a1u-xpro: Add i2c configuration 
Add EXT-1 i2c bus configuration.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-04-25 22:06:29 -03:00
Francisco
d5f9b99555
Merge pull request #16344 from kfessel/p-efm32-rtt-freq 
cpu/efm32: add RTT_FREQUENCY support to efm32
 2021-04-21 09:59:10 +02:00
Akshai M
6b86f8aaf1 boards/nucleo-wl55jc : Add arduino interfaces 2021-04-20 21:04:36 +02:00
Akshai M
efb86039c6 cpu/stm32wl: Add RTT support 2021-04-20 21:04:36 +02:00
Akshai M
2cf081b509 cpu/stm32wl: Flashpage configuration 2021-04-20 21:04:36 +02:00
Akshai M
b816c67bdd nucleo-wl55jc: Add Kconfig files 2021-04-20 21:04:35 +02:00
Akshai M
fd8ddd6161 boards: add nucleo-wl55jc 
Co-authored-by: Kevin "Tristate Tom" Weiss <weiss.kevin604@gmail.com>
 2021-04-20 21:04:29 +02:00
Akshai M
c485c774cf cpu/stm32: add stm32wl 2021-04-20 20:57:48 +02:00
Akshai M
b6c4f9a610 boards/nucleo-wl55jc: Documentation 2021-04-20 20:57:45 +02:00
Karl Fessel
c41342dc5b boards/*efm32*: do not force RTT_FREQUENCY 
while keeping a sane (rtt shared with rtc (counter)) default
this commit adds the ability to define RTT_FREQUENCY
to some thing different than 1 Hz
 2021-04-20 11:12:45 +02:00
Francisco
2a3fbf38f6
Merge pull request #16301 from IchiroKuroki/arduino_nano_33_iot_support 
Configuration extension for arduino-nano-33-iot
 2021-04-20 09:48:24 +02:00
Ichiro Kuroki
1cc02aef2f boards/arduino-nano-33-iot: extend SPI configuration 2021-04-13 18:08:06 +03:00
Ichiro Kuroki
068f029cc8 boards/arduino-nano-33-iot: add ADC configuration 2021-04-13 18:07:51 +03:00
Ichiro Kuroki
a8e9a985d5 boards/arduino-nano-33-iot: add PWM configuration 2021-04-13 18:07:29 +03:00
chrysn
5239f5ed13 boards/microbit-v2: Add buttons 2021-04-13 11:09:57 +02:00
Gerson Fernando Budke
6149531684 boards: Introduce atxmega-a3bu-xplained board 
Add initial version.

Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
 2021-04-07 20:06:11 -03:00
Marian Buschsieweke
6fe7164dae
Merge pull request #16285 from maribu/boards/msbiot 
boards/msbiot: fix param for MPU9150
 2021-04-07 16:56:20 +02:00
Marian Buschsieweke
9c77cd8d55
boards/msbiot: fix param for MPU9150 
When the driver for the mpu9150 has been renamed to mpu9x50, the
corresponding macro in the MSB-IoT board was forgotten to be renamed
as well. This fixes the issue.
 2021-04-07 15:18:30 +02:00
Francisco Molina
67302bfae6
board/feather-nrf52840: add uf2 boot loader 2021-04-07 12:42:30 +02:00