Benjamin Valentin
5d111e71aa
boards: drop board_init() from board.h
2022-02-25 15:08:58 +01:00
c6c31f0361
boards/kinetis: replace GPIO_UNDEF with SPI_CS_UNDEF
2022-01-06 12:34:09 +01:00
Jan Romann
4384795cb9
treewide: Remove excessive newlines
2021-08-13 19:50:38 +02:00
Hyungsin
6eed5b9d43
remove XTIMER_OVERHEAD
2020-01-10 13:22:11 -08:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
Joakim Nohlgård
dd2fad6b9b
kinetis: ADC: Add hardware averaging configuration
...
This allows a board configuration to select which kind of averaging
should be applied to the pin instead of always using 32 sample average.
Very high impedance sources may need to disable hardware averaging in
order to give correct values, the on-chip temperature sensor is one such
signal source.
2018-09-12 16:32:48 +02:00
Hauke Petersen
c2184f3454
boards/cpu/drivers/sys: use generic stdio_ if
2018-08-22 10:54:25 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
Jose Alamos
7b28fbf110
boards: fix Doxygen group directives
2018-08-01 15:24:55 +02:00
Joakim Nohlgård
127b0134b2
mulle: Update I2C ISR config
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
d95cf40d23
mulle: Update I2C configuration
2018-07-25 12:01:39 +02:00
Joakim Nohlgård
723d86bab0
boards/mulle: Fix mixed up RX TX pins on UART0
2018-06-30 15:40:27 +02:00
Francisco Acosta
9a0f3469b7
Merge pull request #8930 from gebart/pr/kinetis-rtt-refactor
...
kinetis: Refactor RTT driver
2018-05-30 14:54:15 +02:00
Joakim Nohlgård
a6c30ab61d
kinetis: Move RTT config to periph_cpu.h
2018-05-22 16:46:39 +02:00
Joakim Nohlgård
c25613fd5c
mulle: Update LPTMR config
2018-05-22 16:45:41 +02:00
70802fc652
boards*: cleanup doxygen
...
- replace brief with name where required
- remove some unwanted empty lines
- fix missing closing doxygen name block
2018-04-18 12:08:56 +02:00
Joakim Nohlgård
c54f6b4fcf
kinetis: Refactor clock generator initialization
2018-04-17 06:59:22 +02:00
Joakim Nohlgård
ebeaa2b6fc
mulle: Fix off-by-1 error in clock dividers
...
The comment says the config should yield 24 MHz flash clock, but the
settings were configured to divide-by-3. (48 MHz / 3 = 16 MHz)
2018-04-12 13:03:54 +02:00
942b0dd064
boards/mulle: fix driver params usage
2018-02-28 18:28:13 +01:00
Joakim Nohlgård
b61eeb9fe0
kinetis: Allow per-board config of ADC ref
...
ADC reference can be external pin or internal VREF module on most
Kinetis CPUs.
2018-02-14 15:16:41 +01:00
b78c96ffc7
boards/*: make brief description consistent
2018-01-24 08:30:56 +01:00
9ecc80fb35
boards/mulle: fix doxygen invalid use of '@brief'
2018-01-16 16:08:41 +01:00
Joakim Nohlgård
925a908d95
kinetis: Update RNGA driver configuration to automatically detect the module
2017-11-10 10:43:00 +01:00
Joakim Nohlgård
22c52bd3a8
kinetis: Unify all Kinetis CPUs in one directory
2017-11-10 10:42:59 +01:00
Joakim Nohlgård
00a0740fcc
kinetis: Add support for LPUART module in parallel with UART module
...
A dispatcher function is implemented for directing writes to the correct
function. The dispatcher is bypassed completely if the CPU only contain
one kind of UART module.
There are at least two different UART hardware modules deployed in
different Kinetis CPU families (or possibly three or more when counting
variations of the UART module). The UART module is an older 8 bit module
with advanced functionality, while the LPUART is a 32 bit module with
focus on low power consumption.
- The older families in the K series all have UART modules.
- The K22F family have both UART and LPUART modules in the same CPU.
- Older L series (e.g. KL25Z) have two variations of the UART module
- Newer L series (e.g. KL43Z) have LPUART modules, and sometimes
UART as well.
- Newer W series (KW41Z) have only LPUART
2017-11-07 14:19:42 +01:00
Francisco Acosta
ba2e55bc93
Merge pull request #7436 from gebart/pr/mulle-rtt-config
...
mulle: Update RTT config to match other Kinetis boards
2017-10-31 15:38:14 +01:00
Hauke Petersen
7ea1e9d127
Merge pull request #6572 from gebart/pr/mulle-lis3dh-settings
...
mulle: Use hardware CS for on-board LIS3DH
2017-08-24 16:52:27 +02:00
Hauke Petersen
5809c1940c
boards: don't redefine xtimer default values
2017-08-18 11:18:45 +02:00
Joakim Nohlgård
c235ca3b7e
mulle: Remove unused configuration
2017-08-01 16:43:53 +02:00
Joakim Nohlgård
742bcad912
kinetis: Unify cpu.c, update clocking initialization
...
Unify cpu_init for all Kinetis CPUs to reduce code duplication.
Updated the MCG driver implementation to make the configuration easier.
Most clock settings are initialized by kinetis_mcg_init() called from
cpu_init. Board specific external clock source initialization
(FRDM-K64F, PhyNode) needs to be performed in board_init instead of
in cpu_init.
2017-08-01 16:30:19 +02:00
Joakim Nohlgård
9210f0db7d
mulle: Update RTT config to match other Kinetis boards
2017-08-01 14:25:08 +02:00
Hauke Petersen
3c623f63c3
cpu/kinetis: optimization of DAC driver impl.
...
- use assert() for checking the line parameter
- use 'bit.h' for bitbanding
- simplified code a bit
- unified style of defifining the board configuration
- removed unused configurations form pba-d-01-kw2x and frdm-k64f
2017-07-20 16:44:41 +02:00
Hauke Petersen
6e967f9776
boards/kinetis-based: beautify ADC configuration
2017-07-14 15:27:18 +02:00
Joakim Nohlgård
a63c0a84a6
kinetis: Use bit.h functions
2017-06-09 05:19:13 +02:00
Martine Lenders
d4693648ba
Merge pull request #7095 from kaspar030/add_headerguard_check_script
...
dist: tools: add headerguard check script
2017-05-24 18:08:29 +02:00
0fcc7d3834
cleanup: apply headerguard script output
2017-05-24 17:54:02 +02:00
Hauke Petersen
867b09c224
cpu/kinetis: make UART mode configurable per board
2017-05-24 14:48:49 +02:00
Martine Lenders
4cd579b236
Merge pull request #6809 from gebart/pr/mulle-led-macros
...
mulle: Streamline LED macros
2017-05-11 14:45:42 +02:00
Martine Lenders
0cc15955f6
Merge pull request #6958 from haukepetersen/fix_kinetis_uart
...
cpu/kintis+boards: fixed UART configuration
2017-04-25 17:22:45 +02:00
Hauke Petersen
9dabbddb2f
cpu/kintis+boards: fixed UART configuration
2017-04-25 14:27:33 +02:00
Martine Lenders
b1547ffd4f
doc: boards: unify board names
2017-04-14 02:23:20 +02:00
Joakim Nohlgård
a107a416cf
kinetis: Refactor UART driver
2017-04-09 17:21:38 +02:00
DipSwitch
a322200582
cpu: remove superfluous SystemCoreClockUpdate
2017-04-06 10:19:27 +02:00
Vincent Dupont
3af13e70ee
Merge pull request #6810 from gebart/pr/mulle-hwcs
...
mulle: Configure hardware CS for all on-board SPI slaves
2017-03-30 11:26:22 +02:00
Joakim Nohlgård
2c6088de55
mulle: Add a configuration for the onboard flash memory
2017-03-29 16:52:11 +02:00
Joakim Nohlgård
ba816a0b5f
mulle: Configure hardware CS for all on-board SPI slaves
2017-03-29 13:07:19 +02:00
Joakim Nohlgård
7ede2218b2
mulle: Streamline LED macros
2017-03-28 17:08:54 +02:00
Joakim Nohlgård
039d9ac33e
mulle: Use hardware CS for on-board LIS3DH
2017-03-28 17:07:55 +02:00
a3497539c2
boards: fix PWM doxygen doc in periph_conf
2017-02-16 17:59:21 +01:00
Hauke Petersen
ed2bb9d3f8
drivers/lis3dh: fixed bug and simplified init()
...
- changed to SPI_MODE_0
- made init() function use the params struct as parameter
2017-01-26 10:12:44 +01:00
