19516: cpu/rpx0xx: add initial ADC support r=dylad a=dylad
### Contribution description
This PR adds initial support for RP2040 ADC peripheral.
It is rather minimalist, and only use oneshot trigger to perform a single acquisition.
I've tested this PR using a potentiometer connected between GND and 3V3.
GP26, GP27, GP28 has been tested.
### Testing procedure
Select `ADC_RES_12BIT` and flash `tests/periph_adc`
`make BOARD=rpi-pico -C tests/periph_adc`
### Issues/PRs references
None.
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
19346: pkg/tinydtls: allow build for AVR r=benpicco a=benpicco
19512: SUBSYSTEMS.md: add jia200x to subsystems r=benpicco a=jia200x
19513: boards/nrf52840dongle/doc: Update nrfutil pointers r=benpicco a=chrysn
### Contribution description
Nordic changed its nrfutil; this change adjust to it.
I'm not fully happy with recommending that tool at all due to its bad quality (see rambling in https://github.com/RIOT-OS/RIOT/issues/19511), but short of soldering on a debug header or touch-probing it with wires it's the only way in to the device. I may later add follow-up recommendations to switch to riotboot, but this now at least fixes the immediate issue.
### Testing procedure
* Look at the updated documentation.
### Issues/PRs references
Closes: https://github.com/RIOT-OS/RIOT/issues/19511
19514: dist/testbed-support: remove obsolete boards from iotlab archi r=benpicco a=aabadie
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19515: drivers/servo: Fix missing dep r=maribu a=maribu
### Contribution description
The servo test app uses `USEMODULE += servo` and lets the build system pick automatically the best suitable backend. If one explicitly chooses a backend e.g. via `USEMODULE += servo_timer`, this currently requires adding `USEMODULE += servo` in addition. This commit fixes the issue.
### Testing procedure
The app provided in https://github.com/RIOT-OS/RIOT/issues/19474 should now compile. (It does so for me.)
### Issues/PRs references
Fixes https://github.com/RIOT-OS/RIOT/issues/19474
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
The servo test app uses `USEMODULE += servo` and lets the build system
pick automatically the best suitable backend. If one explicitly chooses
a backend e.g. via `USEMODULE += servo_timer`, this currently requires
adding `USEMODULE += servo` in addition. This commit fixes the issue.
Fixes https://github.com/RIOT-OS/RIOT/issues/19474
19507: cpu/cc26x0_cc13x0: Drop feature cortexm_mpu r=maribu a=maribu
### Contribution description
At least the CC2650 doesn't have an MPU, I assume this is also true for the rest of the family.
The CC2652 does have an MPU according to the datasheet. So I keep the feature there in place.
### Testing procedure
E.g.
```
make BOARD=cc2650-launchpad -C tests/mpu_noexec_ram flash test
```
fails. (Note: A successful test run would also crash but with a mem manage handler rather than a hardfault due to an invalid instruction on the stack being executed.)
It would be nice to also test the same for a `cc2652-launchpad`, for which the MPU should work.
### Issues/PRs references
None
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
At least the CC2650 doesn't have an MPU, I assume this is also true
for the rest of the family.
The CC2652 does have an MPU according to the datasheet. So I keep the
feature there in place.
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
GCC 12 create a bogus array out of bounds warning as it assumes that
because there is special handling for `uart == 0` and `uart == 1`,
`uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above
that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for
when `UART_NUMOF == 1` likely improves the generated code and fixes
the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
19485: sys/shell: Fix missing dependency r=aabadie a=maribu
### Contribution description
The shell commands depend on the shell module being use. This was already the case in KConfig, but was overlooked in the shell's `Makefile.dep`.
In addition, this uncovered that `tests/memarray` had a bogus dependency on shell commands without every using the shell.
### Testing procedure
Ideally binaries should not differ (except for debug section).
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/19483
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19488: usbus: remove deprecated USBUS_HANDLER_FLAG_TR_FAIL flag r=gschorcht a=dylad
### Contribution description
This PR removes the deprecated `USBUS_HANDLER_FLAG_TR_FAIL` flag.
### Testing procedure
CI should be enough.
### Issues/PRs references
Was deprecated by #17046
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
