cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
* CPU files should already have 'CPU' defined by the board.
* Do not conditionally define CPU as it is not needed.
This is part of cleanup prior to moving the CPU/CPU_MODEL to
Makefile.features.
When flashing some applications the flasher sometimes gets stuck which
prevents flashing after.
It may be from a specific firmware or operation but do not have one yet.
Connect with reset asserted fix flashing from this state.
- Moved compiler & linker flags from boards/common/msba2 to cpu/arm7_common
- Moved dependency to newlib nano to cpu/arm7_common
- Moved config to link in cpu/startup.o to cpu/arm7_common
Enable the handling of flashing `softdevice.hex` when flashing the firmware
for openocd.
However, for flashing, only the `hexfile` and `binfile` can currently be used.
The `elffile` is generated with local pages aligned to `0x10000` which makes
the program starting at `0x1f000` be flashed from `0x10000` with padding bytes
even if the `.text` section is indeed at `0x1f000`:
readelf --sections bin/nrf52dk/gnrc_networking.elf
...
[ 1] .text PROGBITS 0001f000 00f000 00f698 00 AX 0 0 16
...
readelf --segments bin/nrf52dk/gnrc_networking.elf
...
LOAD 0x000000 0x00010000 0x00010000 0x1e6a0 0x1e6a0 R E 0x10000
...
The padding bytes would go through `verify_image` in `openocd` so be expected
to not be overwritten but are by `softdevice.hex`
Using --nmagic at link time removes the local page alignement but would
need dedicated testing.
Use the new OPENOCD_RESET_USE_CONNECT_ASSERT_SRST to configure
'reset_config connect_assert_srst' when flashing and resetting only.
This removes the need for a special debug configuration and should allow
connecting to a running target again.
The boards are using `pyterm` specific options that do not work on any
other `RIOT_TERMINAL`. It is a shame this is required but at least do
not pass arbitrary arguments to the other RIOT_TERMINAL.
So use the new PYTERMFLAGS for this.
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
softdevice needs the memory at 0x2000 to be initialized to 0xffffffff
according to #5893 and testing. However, the addresses [0x8bc, 0x3000[ are not
set in softdevice.hex.
So use a modified hex file with all the memory set to 0xff as it is the rom
reset value anyway.
This change updates the `.hex` file instead on relying on erasing the
memory.
When running tests using 'nordic_softdevice_ble', the 'softdevice.hex'
file must also be taken into account for the test hashing and be
uploaded to the separated murdock testing boards.
When listed as dependency from `test-input-hash` the file must have a
target, which he has not. The file is implicitly created when compiling
`ELFFILE` so declare it as order only dependency.
In practice `BASELIBS` could be enough or even `pkg-build-softdevice`
but I do not want to be depend that much on internals there.
- Boards using stm32f103xx use the same custom config for xtimer
which relies on the same underlying hardware timers that hang
when sleeping for <20us so spin when approaching that limit.
A new blue pill variant with only 32 KiB of flash (secretly coming with
64 KiB flash) instead of the use 64 KiB flash (secretly coming with 128 KiB)
is not compatible with `make flash`. This commit changes the OpenOCD config
so that both variants can be flashed.
The softdevice is only verified to be working on nrf52832-based
boards. This feature prevents the softdevice from being build for
other, similar targets (e.g. nrf52840-based boards).
Introduce and use a common/remote/Makefile.features.
The boards were already using the common `Makefile.include` and
`Makefile.dep`.
This makes 'include $(RIOTCPU)/cc2538/Makefile.features' be done in
the same module where 'CPU' is defined.
Preparation for moving 'CPU' definition to Makefile.features.
Introduce and use a common/msba2/Makefile.features.
The boards were already using the common `Makefile.include` and
`Makefile.dep`.
This makes 'include $(RIOTCPU)/lpc2387/Makefile.features' be done in
the same module where 'CPU' is defined.
Preparation for moving 'CPU' definition to Makefile.features.
Moved SPI config from boards/common/nrf52xxxdk/include/periph_config.h to
boards/common/nrf52/include/cfg_spi_default.h. This allows all nRF52 based
boards to use this SPI config if applicable and also allows nRF52*-DK boards
to use custom SPI configs, if needed.
PORT_LINUX and PORT_DARWIN are evaluated by
`makefiles/tools/serial.inc.mk` and some boards Makefile.include.
Their value does not need to be exported.
This also globally removes the line saying that the exports are needed
for flash rule.
Keep the compiled '.bin' file to remove the need to compile it when
flashing. This remove the need to have the toolchain when flashing so
allow compiling and flashing with `BUILD_IN_DOCKER=1` without a local
toolchain.
Even if it ends up storing a binary, the file is only 34 bytes.
MSPDEBUGFLAGS is evaluated only in the same file.
Its value does not need to be exported.
This will also prevent evaluating 'PORT' for MSPDEBUGFLAGS when not needed.
DEBUGGER/DEBUGGER_FLAGS/DEBUGSERVER/DEBUGSERVER_FLAGS are evaluated by the
main Makefile.include or by file included by it.
Their value does not need to be exported.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `55 insertions(+), 55 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
RESET and RESET_FLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for RESET_FLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `24 insertions(+), 24 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
FLASHER and FFLAGS are evaluated by the main Makefile.include or by file
included by it. Their value does not need to be exported.
This will also prevent evaluating 'PORT' for FFLAGS when not needed.
Testing
-------
`git diff --word-diff` only reports `export` being removed.
`git show --stat` reports `84 insertions(+), 84 deletions(-)`
Which is the same amount as lines that where matching
`export[[:blank::]]\+VARIABLE`.
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
