19880: drivers/ft5x06: fix initialization if callback function parameter is NULL r=aabadie a=gschorcht
### Contribution description
This PR fixes the `ft5x06` driver initialization if the callback function parameter `cb` is `NULL. This might be the case for example if the application uses the touch device in polling mode.
If the interrupt pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
To be able to test the polling mode, this PR also includes a change of the `tests/drivers/ft5x06` application which introduces the environment variables `FT5X06_POLLING_MODE` `FT5X06_POLLING_PERIOD` and in the makefile.
### Testing procedure
1. Use any board with a FTXXXX touch device and test it in polling mode, for example:
```
FT5X06_POLLING_MODE=1 BOARD=stm32f746g-disco make -C tests/drivers/ft5x06 flash term
```
It should work as expected.
```
main(): This is RIOT! (Version: 2023.10-devel-119-g92a44a-drivers/ft5x06_fix_cb_null)
FT5x06 test application
+------------Initializing------------+
Initialization successful
1 touch detected
Touch 1 - X: 236, Y:111
Touch 1 - X: 236, Y:111
...
Touch 1 - X: 236, Y:111
Released!
```
2. Checkout master branch and cerry-pick commit 691a5e6308426ddc685e5a2c297238529211c258. The test application `tests/drivers/ft5x06` will crash once a touch event occur:
```
+------------Initializing------------+
Initialization successful
1 touch detected
Context before hardfault:
```
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The interrupt mode has to be configured independent on whether the INT pin is initialized already by the `ft5x06_init` function if parameter `cb` is defined or later, for example by the `touch_dev` implementation.
19906: netdev/ieee802154_submac: support setting promiscuous mode option r=aabadie a=geonnave
### Contribution description
Found this was missing when trying to use `examples/sniffer` with the `nrf52840dk`. The solution was actually provided by `@benpicco` on the matrix channel.
### Testing procedure
Use the `examples/sniffer` following its README.
### Issues/PRs references
N/A.
Co-authored-by: Geovane Fedrecheski <geonnave@gmail.com>
19867: drivers/ft5x06: introduce conversion for X and Y coordinates r=aabadie a=gschorcht
### Contribution description
This PR provides the parameter option to define how the X and Y coordinates have to be converted.
To get coordinates from the touch panel that correspond to the display coordinates, it is often necessary to convert the coordinates from the touch pannel by swapping and mirroring them. For the sake of simplicity, possible rotations are additionally defined.
The PR includes PRs #19860 and #19866 to be compilable.
### Testing procedure
`tests/pkg/lvgl_touch` should still work for the `stm32f746g-disco` board.
```
BOARD=stm32f746g-disco make -C tests/pkg/lvgl_touch
```
### Issues/PRs references
~Depends on PR #19860~
Depends on PR #19866
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
To obtain coordinates from the touch panel that correspond to the display coordinates, it is often necessary to convert the coordinates from the touch display by swapping and mirroring. For the sake of simplicity, possible rotations are additionally defined.
If the INT pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
To be able to test the FT5x06 device driver in polling mode, variable `FT5X06_POLLING_MODE` is introduced. It is set to 0 by default and can be overriden by 1 to use the polling mode. The polling period can be controlled by the `FT5X06_POLLING_PERIOD` variable.
19870: tests/gcoap_fileserver: only enable test with GCC r=benpicco a=benpicco
19900: gnrc_ipv6_nib: fix for border router with non-6lo interfaces r=benpicco a=benpicco
19902: tests/pkg/relic: skip CI testing with samr21-xpro and llvm toolchain r=benpicco a=aabadie
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
19866: drivers/ft5x06: use a pointer to config parameters instead of copying them r=benpicco a=gschorcht
### Contribution description
There is no need to copy the configuration parameter set to the device descriptor. A const pointer to the configuration parameter set in ROM is sufficient. It saves 16 byte of RAM.
Includes PR #19860 for the moment to be compilable.
### Testing procedure
Use
```
CFLAGS='-DNDEBUG' BOARD=stm32f723e-disco make -j8 -C tests/drivers/touch_dev/
```
with and w/o this PR and compare the sizes.
Without the PR the sizes are:
```
text data bss dec
14652 136 2704 17492
```
With the PR the sizes are:
```
text data bss dec
14676 136 2688 17500
```
### Issues/PRs references
~Depends on PR #19860~
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
A border router should not send router advertisements on it's 6LoWPAN
interfaces, but if it also has classic IPv6 downstream interfaces it
should very much do so.
19881: drivers/stmpe811: fix initialization if callback function parameter is NULL r=benpicco a=gschorcht
### Contribution description
This PR fixes the `stmpe811` driver initialization if the callback function parameter `cb` is `NULL. This might be the case for example if the application uses the touch device in polling mode.
If the interrupt pin is initialized if the callback function parameter `cb` is `NULL`, the driver crashes the first time an interrupt is triggered. Therefore, the INT pin must be initialized only if also the callback function parameter `cb` is not `NULL`.
To be able to test the polling mode, this PR also includes a change of the `tests/drivers/stmpe811` application which introduces the environment variables `STMPE811_POLLING_MODE` `STMPE811_POLLING_PERIOD` and in the makefile.
### Testing procedure
1. Use a `stm32f429i-disc1` board and test it in polling mode:
```
STMPE811_POLLING_MODE=1 BOARD=stm32f429i-disc1 make -C tests/drivers/stmpe811 flash term
```
It should work as expected.
```
main(): This is RIOT! (Version: 2023.10-devel-119-g26e7a-drivers/stmpe811_fix_cb_null)
STMPE811 test application
+------------Initializing------------+
Initialization successful
Pressed!
X: 113, Y:135
X: 113, Y:135
X: 113, Y:136
Released!
```
2. Checkout master branch and cerry-pick commit 691a5e6308426ddc685e5a2c297238529211c258. The test application `tests/drivers/stmpe811` will crash once a touch event occur:
```
main(): This is RIOT! (Version: 2023.10-devel-117-g91441)
STMPE811 test application
+------------Initializing------------+
Initialization successful
Stack pointer corrupted, reset to top of stack
FSR/FAR:
CFSR: 0x00020000
HFSR: 0x40000000
DFSR: 0x00000008
AFSR: 0x00000000
Misc
EXC_RET: 0xfffffff1
*** RIOT kernel panic:
HARD FAULT HANDLER
```
### Issues/PRs references
19892: pkg/tinydtls: allow to set buffer size from application again r=benpicco a=leandrolanzieri
### Contribution description
Currently the buffer size on tinydtls is set in its Makefile whenever `gcoap` module is present. This limits the ability of the user to override the value. This adds a pre-check of the `CFLAGS` to see if it was set before.
### Testing procedure
Try setting `CFLAGS += -DDTLS_MAX_BUF=<some_value>` on `examples/gcoap_dtls`, you should be able to override the default value without errors.
### Issues/PRs references
Reported in #19838
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Leandro Lanzieri <leandro.lanzieri@haw-hamburg.de>
There is no need to copy the configuration parameter set to the device descriptor. A const pointer to the configuration parameter set in ROM is sufficient. It saves some 16 byte of RAM.
19539: drivers/periph_sdmmc: define a High-level SDIO/SD/MMC API and low-level SDMMC periperal driver interface r=benpicco a=gschorcht
### Contribution description
This PR provides a SDIO/SD/MMC Device API (SDMMC). It implements a SD host controller driver that provides a high-level functions using a low-level SDIO/SD/MMC peripheral driver for accessing
- MultiMediaCards (MMC) and Embedded MultiMediaCards (eMMC)
- SD Memory Cards (SD Cards) with Standard Capacity (SDSC), High Capacity (SDHC) or Extended Capacity (SDXC).
It supports:
- 1-bit, 4-bit and 8-bit data bus width
- Default Speed and High Speed
- Auto-CLK
The SDIO/SD/MMC device API (SDMMC) is divided into two parts:
1. The high-level API that implements the SD Host Controller driver and allows
- to inititialize and identify different types of cards,
- to access them either blockwise or bytewise,
- to get information about the used card, and
- to send single commands or application specific commands to the card.
2. The low-level SDIO/SD/MMC peripheral driver implements the low-level functions required by the high-level device API. It has to be implemented for each MCU.
### Limitations:
- Only one card per SDIO/SD/MMC device is supported.
- eMMCs specific features are not supported.
- UHS-I, UHS-II and UHS-III are not supported.
### Testing procedure
PR #19540, PR #19760 or PR #19786 is needed to test this PR.
### Issues/PRs references
Prerequisite for PR #19540
Prerequisite for PR #19760
Prerequisite for PR #19786
19815: cpu/sam0_common/periph/sdhc: busy waiting and clock fixes r=benpicco a=benpicco
19860: drivers/ft5x06: fix vendor ID for FT6xx6 and FTxxxx register addresses r=benpicco a=gschorcht
### Contribution description
This PR provides a fix of the vendor ID for FT6xx6 touch panel driver ICs and a fix of register addresses for FTxxxx.
According to the [Application Note for FT6x06 CTPM](https://cdn-shop.adafruit.com/datasheets/FT6x06_AN_public_ver0.1.3.pdf), the vendor ID of FT6x06 touch panel driver ICs is `0x11` instead of `0xcd`. Although there are no information found in the Web about the FT6x36, the FT6336U touch panel of a ESP32-S3 WT32 SC01 Plus is also working with `0x11` as vendor ID so that it seems that FT6x36 is also using `0x11` as vendor ID.
Figured out with a `stm32f723e-disco` board (revision D03). Without this PR, `tests/drivers/ft5x06` gives:
```
+------------Initializing------------+
[ft5x06] init: invalid vendor ID: '0x11' (expected: 0xcd)
[Error] Initialization failed
```
With this PR it works as expected.
```
+------------Initializing------------+
Initialization successful
main(): This is RIOT! (Version: 2023.10-devel-96-gbb9011-drivers/ft5x06_fix_vendor_id)
FT5x06 test application
+------------Initializing------------+
[ft5x06] init: configuring touchscreen interrupt
Initialization successful
1 touch detected
[ft5x06] read gesture_id '0x00'
Touch 1 - X: 151, Y:138
[ft5x06] read gesture_id '0x00'
```
Some background information found in the Web:
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/STM32F723E-Discovery/stm32f723e_discovery_ts.c (L24-L27)) the FRIDA LCD panel mounted on the `stm32f723e-disco` board either uses FT6x36 (prior revision D) or FT3x67 (revision D). However, the FT5x06 driver type for the card is defined as FT6x06, which does not seem correct: bb9011c3fb/boards/stm32f723e-disco/include/board.h (L59)
- According to the [STM32CubeF7](c20e6dd15b/Drivers/BSP/Components/ft6x06/ft6x06.h (L269-L270)), the vendor ID for FT6x36 should be `0xcd`. However, the FT6336U on ESP32-S3 WT32 SC01 Plus works with vendor ID `0x11`.
- The [Adafruit FT6206 library](95118cd983/Adafruit_FT6206.h (L28)) uses `0x11` as vendor id.
- The `stm32l496g-disco` board uses a FT6236 which has vendor ID `0xcd`.
So the information available on the web is confusing. Maybe, a better solution would be to accept `0x11` as well as `0xcd` as vendor ID for FT6xxx touch panels. Unfortunately, there are no documents available on the registers directly from FocalTech 😟 so it seems to be more speculation than knowledge.
### Testing procedure
### Issues/PRs references
19886: cpu/efm32: fix DAC configuration r=benpicco a=gschorcht
### Contribution description
The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.
At the moment we have only defined one board (`stwstk6220a`) that uses the DAC, so changing the configuration interface shouldn't be critical.
### Testing procedure
`tests/periph/dac` should still work for the `stwstk6220a`
```
BOARD=slwstk6220a make -j8 -C tests/periph/dac flash
```
I don't have a `stwstk6220a` board (EFM32 Series 0) so that I can't test it. I could only test it for the `sltb009a` board (EFM32 Series 1) with the change for VDAC in PR #19887.
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19893: pkg/tinyusb: add missing include r=gschorcht a=Enoch247
### Contribution description
The macro `AUTO_INIT_PRIO_MOD_TINYUSB` was being used, but not defined. This patch includes the header where `AUTO_INIT_PRIO_MOD_TINYUSB` is defined to fix the compiler error.
### Testing procedure
Run any build with `auto_init` and `stdio_tinyusb_cdc_acm` modules active and see that build fails without patch and succeeds with the patch.
### Issues/PRs references
- none known
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
19876: sys/net/ipv4/addr: fix typos r=benpicco a=Enoch247
### Contribution description
This patch fixes some typos in the doxygen doc.
### Testing procedure
Nothing to test. No change to code.
### Issues/PRs references
- None known
19878: makefiles/usb_board_reset.mk: declare term-delay target with test target r=benpicco a=aabadie
19888: boards/sltb009a: complete and fix documentation r=benpicco a=gschorcht
### Contribution description
This PR completes and fixes the documentation which was still in the state as generated automatically by `efm2riot`.
The PR also includes a fix of the configuration of the second UART device that was find out while completing the documentation.
### Testing procedure
Green CI
### Issues/PRs references
Co-authored-by: Joshua DeWeese <jdeweese@primecontrols.com>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
The macro `AUTO_INIT_PRIO_MOD_TINYUSB` was being used, but not defined.
This patch includes the header where `AUTO_INIT_PRIO_MOD_TINYUSB` is
defined to fix the compiler error.
There are new pseudomodules for this driver:
- atwinc15x0_static_connect: Should behave as before, by trying to connect to an AP
by specified WIFI_SSIS and WIFI_PASS
- atwinc15x0_dynamic_connect: takes connection request via NETOPT_CONNECT
and provides the connection result via callback
- atwinc15x0_dynamic_scan: takes network scan requests via NETOPT_SCAN
and provides the scan result as a sorted list via callback
The EFM32 MCU allows the reference voltage to be configured per DAC device, not per DAC channel. Also, the DAC reference voltage was defined in the configuration but not used anywhere.
