This adds the features
- periph_gpio_ll_input_pull_down:
To indicate support for input mode with internal pull down
- periph_gpio_ll_input_pull_keep:
To indicate support for input mode with internal resistor
pulling towards current level
- periph_gpio_ll_input_pull_up:
To indicate support for input mode with internal pull up
- periph_gpio_ll_disconnect:
To indicate a GPIO can be disconnected
- periph_gpio_ll_open_drain:
To indicate support for open drain mode
- periph_gpio_ll_open_drain_pull_up:
To indicate support for open drain mode with internal pull up
- periph_gpio_ll_open_source:
To indicate support for open source mode
- periph_gpio_ll_open_source_pull_down:
To indicate support for open source mode with internal pull down
This commit optimizes the `gpio_conf_t` type in the following
regards:
- The "base" `gpio_conf_t` is stripped from members that only some
platforms support, e.g. drive strength, slew rate, and disabling of
the Schmitt Trigger are no longer universally available but
platform-specific extensions
- The `gpio_conf_t` is now crammed into a bit-field that is 8 bit or
16 bit wide. This allows for storing lots of them e.g. in
`driver_foo_params_t` or `uart_conf_t` etc.
- A `union` of the `struct` with bit-field members and a `bits` is used
to allow accessing all bits in a simple C statement and to ensure
alignment for efficient handling of the type
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
- periph/eeprom.c
- periph/wdt.c
- periph/gpio_ll_irq.c
removed unsupported cpuid and dpgpin feature for atmega8 cpu familly
pkg/qdsa: bump the commit hash bump the commit hash after RIOT-OS/qDSA#4
was merged
The current ISR implementation for AVR8 requires use of
avr8_[enter/exit]_isr pair which add some boilerplate on code.
This add AVR8_ISR which clean-up the code and make it simpler
and hides any schedule detail from the user perspective.
This is a preparation for future scheduling and irq optimizations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The avr8_state store state information used to determine scheduling
and uart irq. This move all uart irq states to avr8_state_uart
variable. It introduce the use of General Purpose IO Register 0
(GPIOR0) when available and now all uarts from xmega can be used.
This is a preparation for future scheduling and irq optimizations.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Vera++ doesn't like `#error` preprocessor directives without a quoted
string afterwards (and also my syntax highlighter doesn't like this as
well). So let's add the quotes to have the tools not spooked out.
This adds a layer of convenience abstraction over classical Harvard
architectures (like most AVRs) that do not map the flash memory into
the data address space and modern Harvard architectures or von-Neumann
architectures that do so. The motivation is to safe a lot of RAM for
AVR by storing constant strings into flash.
The macros CONCAT(), MIN(), and MAX() are defined over and over again in
RIOT's code base. This de-duplicates the code by moving the macros to a
common place.
In 04ab5a74f3 a bug was introduced in
the calculation of the GPIO port address by refactoring code. This
fixes the issue by extracting the GPIO port first from the pin.
Our AVR port doesn't make use of an ISR stack and just victimizes the
stack of whatever thread happens to be running, which in most cases is
the idle thread. Hence, the idle stack has to be large enough to
support the ztimer ISR.
core_panic() doesn't expect the message to be in program memory, but
in data memory. Bad things will happen on AVR when the address is
interpreted as being in data address space, but the allocation is
done in program address space.
The RTT overflow callback is not available on all RTT implementations.
This means it is either a no-op or `rtt_set_overflow_cb()` is a no-op
or it will overwrite the alarm set with `rtt_set_alarm()`.
This adds a feature to indicate that proper overflow reporting is available.
Current there is no way to split code between ATmega and ATxmega in
drivers. This differentiate AVR8 cores into MEGAs and XMEGAs.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
Some periph_rtt implementations do not provide `rtt_set_counter()`. This
adds `periph_rtt_set_counter` as feature to allow testing for its
availability. The feature is provided at CPU level if periph_rtt is
provided by the board for all CPUs implementing `rtt_set_counter()`.
