benpicco
3e3c4d06fb
Merge pull request #15955 from aabadie/pr/boards/microbit-v2
...
boards: add support for microbit v2
2021-02-13 23:48:43 +01:00
41a89a31a9
boards: cpu: nfr52: fix typo in nrf52833 cpu model name
2021-02-10 13:39:51 +01:00
13ca17ff24
boards: add initial support for microbit v2
2021-02-10 13:39:51 +01:00
Benjamin Valentin
1298518be9
boards/[cc13x0, cc26x0]: move programmer config to common folder
2021-02-09 23:48:53 +01:00
Benjamin Valentin
9f0ee88d51
boards/common/cc26x2_cc13x2: rename to cc26xx_cc13xx
2021-02-09 23:37:26 +01:00
benpicco
6929577c76
Merge pull request #15845 from benpicco/boards/adafruit-itsybitsy-m4
...
boards: add adafruit-itsybitsy-m4
2021-02-09 19:41:43 +01:00
Benjamin Valentin
1d638bf017
boards/samd21-arduino-bootloader: increase preflash delay
...
The USB bootloader can take a while to be ready / Linux takes a while
to set up the interface.
1s is right at the edge, leading to races and often failed flashing.
Bump the delay to 2s for a wider safety margin, with this flashing is
a lot more reliable.
2021-02-09 16:13:23 +01:00
Benjamin Valentin
91e863f616
boards/samd21-arduino-bootloader: add support for samd51
2021-02-09 16:13:07 +01:00
Francisco
3b2a55a923
Merge pull request #15865 from benpicco/pm_layered-default
...
cpu: make pm_layered a DEFAULT_MODULE
2021-02-03 08:17:29 +01:00
Benjamin Valentin
762decd207
boards/common/e104-bt50xxa-tb: software reset depends on periph_pm
2021-02-02 23:40:21 +01:00
64b6314807
boards/atmega: cleanup BOOTLOADER variables definitions
2021-02-02 14:10:03 +01:00
Leandro Lanzieri
150b086c3f
boards/e104-bt50xxa-tb: move default module to Makefile.default
2021-01-25 09:17:00 +01:00
b2227b88b0
Merge pull request #15634 from aabadie/pr/boards/nucleo-common-kconfig-hse
...
boards/nucleo*: move HSE/LSE configuration for Kconfig to common
2021-01-21 17:21:56 +01:00
5bc7555ae7
Merge pull request #15794 from fjmolinas/pr_fix_posix_sleep
...
tests/posix_sleep: fix for invalid RTT configurations
2021-01-20 14:07:23 +01:00
de37259c64
boards/nucleo-*: put Kconfig HSE/LSE clock config in common
2021-01-20 09:16:46 +01:00
96b79c21f0
boards/stm32f4*: add Kconfig clock configuration
2021-01-19 22:09:16 +01:00
Francisco Molina
4c9a2d7b95
boards/common/arduino-zero: configure RTT_MIN_OFFSET
2021-01-19 12:37:39 +01:00
Francisco Molina
69659efc99
boards/common/iotlab: change default RTT_FREQUENCY to RTT_MAX_FREQUENCY
2021-01-19 12:37:38 +01:00
b801d57f0c
Merge pull request #15555 from dylad/pr/makefiles/dfu_optionnal_dfuse
...
boards: move DfuSe specific argument at board level
2020-12-09 14:08:50 +01:00
dylad
47f8d69845
boards: update boards using DfuSe
...
Update these boards to make use of a new argument to keep using DfuSe mode of dfu-util
2020-12-09 11:48:37 +01:00
8f6005b26e
boards: cpu: stm32f1: use .config for specific iotlab PLL_PREDIV
2020-12-08 18:02:57 +01:00
75d2002e76
boards/stm32f1/f3: adapt Kconfig for clock configuration
2020-12-08 17:36:52 +01:00
iosabi
3f600d869e
boards/common/qn908x: Compute the image checksum
...
QN908X CPUs require the image to have a valid checksum. The checksum is
a simple addition of the first 7 uint32_t values stored in the 8th
position of the image header. This position is a reseved entry of the
Cortex-M Vector Table and its value depends on other fields that are
computed at link time. Performing this checksum at link time seems
hard to do, so instead this patch uses a python script to patch the
checksum from the ELF file. This redefines the value of FLASHFILE
to the new .elf file with the checksum fixed.
With this patch, OpenOCD can program and verify QN908X images since
now they have a valid checksum value.
2020-12-03 17:47:33 +01:00
f150304643
boards/common/qn908x: cleanup Makefile.include
...
- include serial.inc.mk is not needed as it's handled in the main Makefile.include
- the default serial ports are already defined in serial.inc.mk
- use PROGRAMMER to specify the default programmer (openocd) and don't include openocd.inc.mk
- FLASHFILE is already defined as ELFILE in openocd.inc.mk
2020-12-02 14:05:19 +01:00
benpicco
646e665a86
Merge pull request #13855 from iosabi/qn908x_initial
...
cpu/qn908x: Initial minimal support for NXP QN908x CPUs.
2020-12-02 10:31:38 +01:00
f8822b5f8f
boards: remove not need PORT_LINUX/PORT_DARWIN
...
They defined the same in serial.inc.mk. Some Darwin default are changed because they are probably wrong
2020-12-02 09:20:57 +01:00
4c290e1f92
boards: remove include of serial.inc.mk
2020-12-02 09:20:57 +01:00
iosabi
86ab9401aa
boards/common/qn908x: Define a common qn908x board
...
Boards based on the qn908x CPU will share the same OpenOCD configuration
regarding the image offset and OpenOCD commands needed to flash the
image directly with "make flash".
2020-12-02 02:47:07 +00:00
benpicco
418aaa6e67
Merge pull request #15388 from benpicco/boards/e104-bt5010a-tb
...
boards/e104-bt5011a-tb: add support for the E104-BT5011A Test Board
2020-12-02 00:24:33 +01:00
2dc5a69939
Merge pull request #15535 from aabadie/pr/tools/lpc2k_pgm
...
tools/lpc2k_pgm: refactor build system integration
2020-12-01 21:13:52 +01:00
Benjamin Valentin
0b83589bbc
boards/common/e104-bt50xxa-tb: enable software reset
2020-12-01 18:29:09 +01:00
Benjamin Valentin
ef96696bab
boards/common/e104-bt50xxa-tb: common board for Ebyte nRF52 breakouts
2020-12-01 16:14:43 +01:00
7272549007
boards/common/msp430: use common mspdebug
2020-12-01 15:52:17 +01:00
41d0272140
boards/common/msba2: use common lpc2k_pgm programmer
2020-12-01 13:39:42 +01:00
aea9d4b0a7
make: move lpc2k_pgm in tools/
2020-12-01 13:36:36 +01:00
b0b19203a7
Merge pull request #15190 from benpicco/boards/wefun-f401cc
...
boards/common/weact-f4x1cx: create common WeAct boards
2020-12-01 12:03:38 +01:00
Benjamin Valentin
bfb7cbfa4d
boards/nrf52: resolve netdev dependencies for all family members
2020-12-01 11:42:52 +01:00
Benjamin Valentin
e200d009ad
boards/common/weact-f4x1cx: create common WeAct boards dir
2020-12-01 11:02:09 +01:00
d527ab6994
cpu: boards: esp: use common esptool makefile
2020-12-01 10:36:42 +01:00
Erik Ekman
e3142c39f0
boards/esp32: add ESP32-Ethernet-Kit board
...
Mostly copied from esp32-wroom-kit and Ethernet part from
esp32-olimex-evb.
Ethernet and serial port has been tested (on v1.2 board).
2020-11-28 10:18:54 +01:00
c6ad85a7b0
boards: don't include programmer logic at board level
2020-11-25 22:31:13 +01:00
Bas Stottelaar
e438e9afde
boards/efm32: provide efm32_coretemp feature
2020-11-18 17:27:17 +01:00
Bas Stottelaar
e1b356e884
boards/efm32: enable efm32_coretemp driver
2020-11-18 12:28:45 +01:00
benpicco
be9eb22bb8
Merge pull request #15106 from chrysn-pull-requests/saul-rgbleds
...
saul_pwm: auto-init'able RGB LEDs and dimmers
2020-11-13 18:22:30 +01:00
f626758aaf
Merge pull request #15392 from fjmolinas/pr_cc2538_riotboot
...
boards/cc2538: add riotboot feature
2020-11-13 15:39:55 +01:00
Francisco Molina
8598176544
boards: add riotboot to cc2538 based boards
2020-11-13 14:51:58 +01:00
Gilles DOFFE
58f90c986f
boards/common/stm32: add openocd config stm32mp1.cfg
...
Add common openocd configuration for stm32mp1 boards.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
Gilles DOFFE
2ac0467807
cpu/stm32: configure timer2 for stm32mp1 boards
...
This timer will be used by RIOT-OS as the scheduling timer for
stm32mp157c-dk2 board.
Signed-off-by: Gilles DOFFE <gilles.doffe@savoirfairelinux.com>
2020-11-13 10:43:08 +01:00
benpicco
808c5b7eb8
Merge pull request #15424 from basilfx/feature/efm32_fix_timers
...
boards/efm32: update channel_numof with correct values
2020-11-11 09:49:24 +01:00
Bas Stottelaar
67e7a14e6c
boards/efm32: update channel_numof
...
The number of channels per timer got updated incorrectly in #15368 .
Only TIMER1 and higher have four channels. Without this fix, timer
initialization will halt.
2020-11-11 00:26:52 +01:00
