Akshai M
58516f7e2a
drivers/include/sx127x.h: Tagged Compile Time Configuration
2020-03-27 19:06:10 +05:30
Martine S. Lenders
62d48d5bf3
gnrc_netif: document new *_create() out parameter as such
2020-03-26 14:37:44 +01:00
Martine Lenders
061eb88c05
Merge pull request #12994 from jia200x/pr/gnrc_netif_desc_alloc
...
gnrc_netif: implementation of dynamic GNRC_NETIF_NUMOF approach
2020-03-26 14:30:44 +01:00
Jose Alamos
67ed9defbe
gnrc_netif_xxx_create: use external netif allocation
2020-03-26 11:12:23 +01:00
Christian Friedrich Coors
08703766fc
drivers/ws281x: Add ESP32 support
2020-03-25 17:25:35 +01:00
1498a7ada2
drivers/disp_dev: add help functions for backlight
2020-03-24 12:02:50 +01:00
Francisco
cdbf0b2d69
Merge pull request #13583 from benpicco/at86rf215-minimal
...
drivers/at86rf215: add basic support for AT86RF215 dual-band radio
2020-03-20 09:33:50 +01:00
benpicco
5435792034
Merge pull request #12277 from benemorius/pr/kw41zrf
...
drivers: add kw41zrf
2020-03-20 00:49:56 +01:00
Joakim Nohlgård
5bd67d88a8
drivers/kw41zrf: Transceiver driver for the KW41Z radio
...
This is the radio found in NXP Kinetis KW41Z, KW21Z. Only 802.15.4 mode
is implemented (KW41Z also supports BLE on the same transceiver).
The driver uses vendor supplied initialization code for the low level
XCVR hardware, these files were imported from KSDK 2.2.0 (framework_5.3.5)
2020-03-19 17:00:04 -05:00
Benjamin Valentin
60cc3b8757
periph/rtt: Allow using MOCK_RTT defines from Unit Test
2020-03-19 15:25:14 +01:00
Benjamin Valentin
d35511bee7
drivers/at86rf215: Add basic driver for the AT86RF215 radio
...
This adds a driver for the SPI based AT86RF215 transceiver.
The chip supports the IEEE Std 802.15.4-2015 and IEEE Std 802.15.4g-2012 standard.
This driver supports two versions of the chip:
- AT86RF215: dual sub-GHz & 2.4 GHz radio & baseband
- AT86RF215M: sub-GHz radio & baseband only
Both radios support the following PHY modes:
- MR-FSK
- MR-OFDM
- MR-O-QPKS
- O-QPSK (legacy)
The driver currently only implements support for legacy O-QPSK.
To use both interfaces, add
GNRC_NETIF_NUMOF := 2
to your Makefile.
The transceiver is able to send frames of up to 2047 bytes according to
IEEE 802.15.4g-2012 when operating in non-legacy mode.
Known issues:
- [ ] dBm setting values are bogus
- [ ] Channel spacing for sub-GHz MR-O-QPSK might be wrong
- [ ] TX/RX stress test will lock up the driver on openmote-b
2020-03-19 14:39:18 +01:00
Gunar Schorcht
c4325e4d5e
drivers/bme680: add SAUL capabilities
2020-03-12 08:52:10 +01:00
Gunar Schorcht
1118f80180
drivers/saul: add common gas class
2020-03-12 08:42:59 +01:00
Gunar Schorcht
9dd11eb188
drivers: add support for BME680 driver
...
Add the support for BME680 based on the BME680 vendor driver package.
2020-03-12 08:42:59 +01:00
Schorcht
7548a6e849
drivers: add APDS99XX ALS and proximity
2020-03-11 14:21:47 +01:00
Jose Alamos
67bc0e13af
netdev: add netdev_trigger_event_isr function
2020-03-06 14:02:40 +01:00
Martine Lenders
ff425576a0
slipdev_stdio: provide stdio multiplexing over SLIP
2020-03-06 08:58:45 +01:00
Martine Lenders
8e827055f0
slipmux: remove inesc member
...
It's not needed anymore.
2020-03-06 08:58:45 +01:00
benpicco
7af046d740
Merge pull request #13548 from benpicco/sys/auto_init/netif-manual
...
sys/auto_init: allow delayed initialisation of SAUL & gnrc_netif
2020-03-05 17:05:02 +01:00
Jan Mohr
aa5ffe5a6d
drivers/lis2dh12: added interrupt function
2020-03-04 17:01:58 +01:00
Benjamin Valentin
521b1ce440
sys/auto_init: allow delayed initialisation of SAUL
...
Co-authored-by: Martine S. Lenders <m.lenders@fu-berlin.de>
2020-03-04 16:13:40 +01:00
1298ae828a
Merge pull request #13202 from bergzand/pr/mtd/mapper
...
MTD: Add module for remapping MTD sectors
2020-03-04 11:51:39 +01:00
9a430cd682
mtd: add module for remapping MTD sectors
2020-03-04 10:47:50 +01:00
Benjamin Valentin
725311a054
periph_common/rtc: add rtc_tm_valid()
...
Add a function to verify all members of a struct tm are within
the valid range.
2020-03-03 16:26:14 +01:00
Gunar Schorcht
9e372104f0
Merge pull request #13284 from benpicco/rtc_mktime
...
periph_common/rtc: add rtc_mktime() & rtc_localtime() helper functions for RTC implementations
2020-03-03 14:12:50 +01:00
b050608771
Merge pull request #13262 from aabadie/pr/sys/disp_dev
...
sys/disp_dev: add generic interface for display drivers
2020-03-03 13:25:45 +01:00
d13d1aed48
Merge pull request #13336 from bergzand/pr/mtd_spi_nor/erase_timings_in_struct
...
mtd_spi_nor: erase timings in struct
2020-03-03 11:59:28 +01:00
Benjamin Valentin
5b64ae4ef5
periph_common/rtc: add rtc_localtime()
...
Add function to convert a RTC timestamp (non-UNIX) to a time struct.
2020-03-03 11:01:02 +01:00
acfac5d32d
drivers/ili9341: provide adaption to disp_dev interface
2020-03-03 10:25:55 +01:00
ac6d0b9077
sys: add interface for generic display device
2020-03-03 10:25:54 +01:00
dc04b86d1b
mtd_spi_nor: Add wait timings to parameters
2020-03-03 09:49:00 +01:00
Benjamin Valentin
becff61e20
periph_common/rtc: add rtc_mktime()
...
Add a function to convert a time struct to an unsigned timestamp (non-UNIX).
2020-02-29 17:42:50 +01:00
Gunar Schorcht
a27e77cfb3
drivers/at24mac: fix grouping in doc
2020-02-27 08:46:40 +01:00
Gunar Schorcht
dfae4fbb27
drivers/bmx280: remove line break in defgroup
...
defgroup command must not contain a line break.
2020-02-27 08:43:21 +01:00
Gunar Schorcht
2bbc02a6e0
drivers/sps30: brief documentation added
2020-02-27 08:43:21 +01:00
Gunar Schorcht
a9a9745ffd
drivers/at: change grouping in doc
2020-02-27 08:43:21 +01:00
Gunar Schorcht
4c210b7b2f
drivers/at24xxx: fix grouping in doc
2020-02-27 08:43:21 +01:00
2dcf65d942
Merge pull request #13332 from bergzand/pr/mtd_spi_nor/params_struct
...
mtd_spi_nor: Move const params to separate struct
2020-02-26 09:43:18 +01:00
2b713f13cb
drivers/srf08: refactor driver configuration
2020-02-25 21:24:02 +01:00
benpicco
aa1c23d4bd
Merge pull request #11929 from fabian18/driver-at24cxxx-eeprom
...
Driver for AT24CXXX EEPROM
2020-02-25 18:16:45 +01:00
fabian18
2c77ee4cab
drivers/at24cxxx: at24cxxx EEPROM driver
2020-02-24 14:00:25 +01:00
Michel Rottleuthner
1743f96fa8
drivers/saul: satisfy vera++ (shorten lines to below 100 chars)
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
7e089bce7b
drivers/sps30: add saul integration
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
46091b6b43
drivers/saul: add class and string for size measurements
2020-02-20 14:26:55 +01:00
Michel Rottleuthner
c4093c29a4
drivers: add driver for Sensirion SPS30 particulate matter sensor
2020-02-20 14:26:55 +01:00
Yegor Yefremov
f63cc9f900
drivers/sx127x: fix dead links
...
URLs of the datasheets have been changed again.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2020-02-17 09:54:21 +01:00
Jue
9cb8e2c941
drivers/dose: made the sense pin optional
2020-02-16 17:58:58 +01:00
Jue
cc184ca65b
drivers/dose: fixed misspelled OCTET
2020-02-16 17:58:57 +01:00
Benjamin Valentin
d3ace2e821
drivers: add at24mac driver
...
The AT24MAC is an EEPROM that provides unique ID functionality.
On one address it provides normal AT24xxx EEPROM operations, but
on a seperate i2c address a read-only EUI-64 and a 128-bit ID are
provided.
This adds a simply driver for this chip.
2020-02-13 15:58:43 +01:00
1bc842707a
drivers/stmpe811: add implementation
2020-02-13 09:14:51 +01:00
benpicco
f5b6544123
Merge pull request #13329 from wosym/pr/bh1900nux
...
Add bh1900nux driver
2020-02-12 11:16:23 +01:00
Wouter Symons
a2d9389373
Add bh1900nux driver
2020-02-12 07:34:22 +01:00
e5fa8921b3
mtd_spi_nor: Move const params to separate struct
2020-02-11 15:55:41 +01:00
e27a0be577
Merge pull request #13328 from bergzand/pr/docs/display_group
...
drivers: Add display device doxygen group
2020-02-10 20:19:16 +01:00
Benjamin Valentin
11d77271cf
drivers/ws281x: introduce WS281X_HAVE_INIT
...
This brings the backend-dependant init() function in line with
`WS281X_HAVE_PREPARE_TRANSMISSION` and `WS281X_HAVE_END_TRANSMISSION`.
2020-02-10 14:45:26 +01:00
6b2478953c
pcd8544: move to display devices doxygen group
2020-02-10 14:11:17 +01:00
7ade31ad5b
ili9341: move to display devices doxygen group
2020-02-10 14:11:05 +01:00
d070f2924d
hd44780: move to display devices doxygen group
2020-02-10 14:10:46 +01:00
965a0f9c9a
dsp0401: move to display devices doxygen group
2020-02-10 14:10:18 +01:00
e573d8b57f
drivers/ili9341: cleanup doxygen documentation
2020-02-10 11:46:01 +01:00
e126599928
drivers/ili9341: use const qualifier where possible
2020-02-02 18:55:46 +01:00
Sebastian Meiling
a4c4c25b3b
Merge pull request #12866 from jia200x/pr/gnrc_lorawan_remove_netdev
...
net/gnrc_lorawan: remove netdev layer from MAC
2020-01-30 14:02:59 +01:00
Marian Buschsieweke
fdc87ae30d
drivers/cc110x: Fixed typo in doc
2020-01-23 18:27:04 +01:00
cab8729e32
drivers/ili9341: add number of lines parameter
2020-01-15 15:36:21 +01:00
cfbab79398
Merge pull request #13105 from bergzand/pr/ili9341_add_config
...
ili9341: Add color mode and inversion parameters
2020-01-13 21:07:25 +01:00
Francisco
3e0043021b
Merge pull request #13110 from kaspar030/periph_rtt_docimp
...
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 17:12:08 +01:00
146137ef72
ili9341: Add color mode and inversion parameters
2020-01-13 17:09:02 +01:00
Leandro Lanzieri
434309a9e2
Merge pull request #13106 from MrKevinWeiss/pr/fix/mpudoc
...
drivers/mpu9x50: Fix prameter placement for docs
2020-01-13 15:51:00 +01:00
4df2827fe1
periph/rtt: clarify rtt_set_alarm() documentation
2020-01-13 15:18:16 +01:00
Francisco
1977423e9b
Merge pull request #13048 from maribu/adc-int32_t
...
periph/adc: Change return type of `adc_sample()` to `int32_t`
2020-01-13 12:56:09 +01:00
MrKevinWeiss
e19091541f
drivers/mpu9x50: Fix prameter placement for docs
...
When generating the doxygen output the temp sens and offset are in the config group.
Since they are internal parameters not to be accessed by users they are placed in the mpu9x650_internal.h file.
2020-01-13 12:50:13 +01:00
benpicco
1c148ba2f2
Merge pull request #10092 from gschorcht/drivers_itg320x
...
drivers: add driver for InvenSense ITG-320X 3-axis gyroscope
2020-01-11 17:37:48 +01:00
Schorcht
71772cc3b3
drivers: add driver for ITG320X 3-axis gyroscope
2020-01-11 08:02:34 +01:00
Marian Buschsieweke
6e39b4d191
drivers/periph: adc_sample() now returns int32_t
...
Reasoning: This allow support for ADCs with resolution of more than 16 bits on
8 bit and 16 bit platforms.
2020-01-10 14:13:06 +01:00
Marian Buschsieweke
e03615fd38
drivers/dht: Worked around doxygen bug
...
Markdown in @retval values is currently broken in Doxygen. This removes use
of markdown there
2020-01-09 17:08:05 +01:00
benpicco
87f86c4c08
Merge pull request #12924 from daexel/shtc1_bugfix
...
drivers/shtc1: Initial support for the SHTC1 temperature and humidity sensor
2019-12-16 18:21:48 +01:00
steffen
fa05cf0c5d
Driver/shtc1: add saul integration
...
- add saul integration
- uncrustified
- SAUL/DRIVER tests
2019-12-16 15:29:04 +01:00
Jue
bc46c7478f
drivers: add Differentially Operated Serial Ethernet driver
2019-12-16 10:43:13 +01:00
35737a24e4
drivers/ili9341: add spi mode configuration option
2019-12-11 16:18:40 +01:00
ef4dcb8eec
ili9341: Initial include
...
This commit adds support for the ili9341 display
2019-12-11 16:18:37 +01:00
Jose Alamos
99dbcecc3a
net/gnrc_lorawan: remove netdev SAP interface
2019-12-03 14:08:35 +01:00
Yegor Yefremov
87d8f29af2
drivers/ws281x: improve documentation
...
Replace 'to' with 'too' and remove the space between '8 MHz'.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-11-29 11:24:29 +01:00
Jannes
0acf55af53
drivers/ncv7356: Add documentation
2019-11-27 13:35:57 +01:00
MichelRottleuthner
bf676d4728
Merge pull request #11022 from jia200x/pr/gnrc_lorawan
...
gnrc_lorawan: add support for GNRC based LoRaWAN stack
2019-11-27 09:25:20 +01:00
Jose Alamos
523d1af490
netdev: add netdev types for GNRC_LORAWAN
2019-11-26 21:52:05 +01:00
benpicco
ffe208a3a4
Merge pull request #11394 from maribu/saul_stringification
...
drivers/saul: Improved stringification
2019-11-26 13:53:59 +01:00
benpicco
af0c6e9319
Merge pull request #12772 from daexel/bme280_bugfix
...
drivers/bmx280: add temp_measurement to methods
2019-11-25 18:26:50 +01:00
benpicco
a21fe4ae87
Merge pull request #12259 from daexel/dcf77
...
drivers/dcf77:Inital Support DCF77
2019-11-25 16:20:51 +01:00
Michel Gerlach
973d9fd54b
driver/bme280: add dependencies on temperature for pressure and humidity
2019-11-25 13:13:24 +01:00
Marian Buschsieweke
3264106a2f
Merge pull request #12704 from benpicco/AT86RFR2_smart_idle
...
drivers/at86rf2xx: enable Smart Reduced Power Consumption for AT86RFR2
2019-11-25 11:57:44 +01:00
Marian Buschsieweke
837e9c1ddc
drivers/saul: Improved stringification
...
- Changed declaration of SAUL classes (while keeping the format)
- Termed "class of SAUL classes" category of SAUL classes in the doc to
avoid confusion. (E.g. a SAUL class will now be in category sensor or
actuator.)
- Separate enums for SAUL category and intra-category ID. Numbers will now
but auto-assigned by the compiler
- Use constant look-up tables for stringification (one table per SAUL category).
==> This saves 512B in .data section of AVR
2019-11-25 10:09:11 +01:00
benpicco
ce1f383f90
Merge pull request #12606 from maribu/at86rf2xx-addr-endianess
...
drivers/at86rf2xx: Updated address API
2019-11-24 16:33:16 +01:00
c87748f563
periph: fix periph/gpio_util.h header guards
2019-11-23 22:39:40 +01:00
eeca0e3752
drivers/include: fix typos
2019-11-23 22:39:40 +01:00
5ebe48ce42
drivers/sht3x: fix typos
2019-11-23 22:39:39 +01:00
1d2dd2efdd
drivers/sdcard_spi: fix typos
2019-11-23 22:39:39 +01:00
a90a192648
drivers/pca9685: fix typos
2019-11-23 22:39:39 +01:00
541596c893
drivers/nrf24l01p: fix typos
2019-11-23 22:39:39 +01:00
Francois Berder
4a31f94cfc
many typo fixes
...
Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
2019-11-23 22:39:07 +01:00
Marian Buschsieweke
f0317c50f2
drivers/at86rf2xx: Updated address API
...
Changed the address getter and setter functions to avoid byte order
confusion.
2019-11-23 19:40:09 +01:00
