Although ESP32 has four SPI controllers, only two of them can be effectively used (HSP and VSPI). The third one (FSPI) is used for external memory such as flash and PSRAM and can not be used for peripherals. FSPI is therefore removed from the API. In addition, the SPI0_DEV and SPI1_DEV configuration parameters are renamed SPI0_CTRL and SPI1_CTRL to better describe what they define and to avoid confusion with SPI_DEV (0) and SPI_DEV (1).
Although ESP32 has four SPI controllers, only two of them can be effectively used (HSP and VSPI). The third one (FSPI) is used for external memory such as flash and PSRAM and can not be used for peripherals. FSPI is therefore removed from the API. In addition, the SPI0_DEV and SPI1_DEV configuration parameters are renamed SPI0_CTRL and SPI1_CTRL to better describe what they define and to avoid confusion with SPI_DEV (0) and SPI_DEV (1).
Timer restart was moved from esp_now_scan_peers_done to esp_now_scan_peers_start to avoid that the scan for peers isn't triggered anymore if the esp_now_scan_peers_done callback isn't called because of errors.
The brr calculation on the datasheet is different than what is implmented.
This is intentional since it provides better rounding due to truncation.
There was no comment explaining that so this comment should prevent confusion.
Since it is not possible to reenter the function `esp_now_recv_cb`, and the functions netif::_ recv and esp_now_netdev::_ recv are called directly in the same thread context we can read directly from the `buf` and don't need a receive buffer anymmore.
Since it is not possible to reenter the function `esp_now_recv_cb`, and the functions netif::_ recv and esp_now_netdev::_ recv are called directly in the same thread context we only need a buffer which contains one frame and its source mac address.
Since it is not possible to reenter the function `esp_now_recv_cb`, and the functions netif::_ recv and esp_now_netdev::_ recv are called directly in the same thread context, neither a mutual exclusion has to be realized nor have the interrupts to be deactivated.
Since the esp_now_recv_cb function is not called directly as an ISR through interrupts, it is not executed in the interrupt context. _recv can therefore be called directly. The treatment of the recv_event is no longer necessary.
Although it should not be possible to reenter the function esp_now_recv_cb, this is avoided by an additional boolean variable. It can not be realized by mutex because it would reenter from same thread context. If macro NDEBUG is not defined, an assertion is used.
A second slot is defined with a calculated size, from the
remaining flash after the bootloader and the first slot.
Both slots are defined as equal size, but it can be overriden.
Avoids parsing IPv6 packets to determine destination address.
Allows using 6Lo over ESP-NOW, which is required due to the low MTU of
ESP-NOW.
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
Refactors i2c_2 to match the structure of i2c_1 better.
Corrects functionality issues.
Allows the common implementation of read_regs and write_regs.
Documents constraints of hardware.
Matches error messages with API.
RIOTBOOT_SLOT_LEN is calculated as an hexadecimal value and
handles ROM_LEN defined as kilobytes like '512K'
This enables support for all the cortex-m0+/3/4/7 arch,
so most boards embedding these are potentially supported.
One needs just to ensure that the CPU can be initialised
at least twice.
Co-authored-by: Gaëtan Harter <gaetan.harter@fu-berlin.de>
This new function allows to jump to another execution
environment (VTOR) located at a certain (aligned) address.
It's used to boot firmwares at another location than
`CPU_FLASH_BASE`.
The user needs to ensure that the CPU using this feature
is able to be initialised at least twice while jumping
to the RIOT `reset_handler_default` function, since it
initialises the CPU again (calls cpu_init()).
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Due to the stdio getting called after periph_init the uart may send before initialized.
This adds a simple check so the uart does not get into a locked-up state.
This commit fixes configuration problems when trying to use i2c pins that need to be remapped.
All B8 and B9 pins for STM32F1 need to be remapped, so a check is done if the remappable pins are selected.
cpu/esp32/include/periph_cpu.h overrides the default definition of adc_res_t from periph/adc with a definition which contains only four resolution, two new resolutions and two resolutions defined by the default definition of adc_res_t. This gives compilation errors if an application uses other resolutions. According to the documentation, adc_sample should return -1 if the resolution is not supported. All other CPUs override adc_res_t either to add new resolutions or to mark resolutions as unsupported. But they all allow to use them at the interface. Therefore, esp32 overrides now the definition of adc_res_t with all resolutions that are defined by the default definition of adc_res_t and new platform specific resolutions. It returns -1 if a resolution is used in adc_sample that is not supported.
cpu/esp8266/include/periph_cpu.h overrides the default definition of adc_res_t from periph/adc with a definition which contains only one resolution. This gives compilation errorss if an application uses other resolutions. According to the documentation, adc_sample should return -1 if the resolution is not supported. All other CPUs override adc_res_t either to add new resolutions or to mark resolutions as unsupported. But they all allow to use them at the interface. Therefore, esp8266 uses now the default definition of adc_res_t and returns -1 if a solution is used in adc_sample that is not supported.
By not forcing a fixed oversampling rate we can achieve better baud rate
accuracy than otherwise possible.
For example, when requesting 115200 with a module clock of 4 MHz,
picking an oversampling rate of 17 (instead of hardware
default 16) yields 117647 baud instead of 125000 baud as the best
matching rate. Better matching baud rate between receiver and
transmitter results in a lower probability of transmission errors.
- correct number of timers for atmega328p from 2 to 1
- correct number of timer channels for atmega328p from 3 to 2
- adapt atmega periph timer implementation accordingly
