Benjamin Valentin
bd19a55804
boards: remove EDBG_DEVICE_TYPE
...
EDBG_DEVICE_TYPE is a property of the CPU, is should not be set
by every board individually.
2020-01-31 09:35:27 +01:00
dylad
fc9549b069
boards/sam0: update sam0-based board to use hw fc
2019-12-20 21:26:56 +01:00
Benjamin Valentin
0ea2cbf1eb
boards: remove RTT_NUMOF/RTC_NUMOF
...
Those macros are defined but never used.
2019-11-08 14:20:33 +01:00
Kees Bakker
04c84ed158
cpu/sam0: refactor ADC_0 into plain ADC
...
This change is for all boards with a sam0 cpu. This cpu just has one ADC.
It is unnecessary to have defines with ADC_0_ prefix as if multiple ADCs
are possible.
Some defines were not used, such as ADC_0_EN, ADC_0_CHANNELS,
ADC_MAX_CHANNELS, ADC_0_CLK_SOURCE, ADC_0_CHANNELS
Change all ADC_0_ prefixes to ADC_
2019-10-03 20:45:44 +02:00
Gaëtan Harter
636285ebe4
boards: move CPU/CPU_MODEL definition to Makefile.features
...
cpu/$(CPU)/Makefile.features and cpu/$(CPU)/Makefile.dep are
automatically included
Part of moving CPU/CPU_MODEL definition to Makefile.features to have it
available before Makefile.include.
2019-08-20 16:11:50 +02:00
Benjamin Valentin
8af04cd939
boards: make use of ARRAY_SIZE macro
2019-08-06 19:43:54 +02:00
a68f78bb10
boards/*: remove unused FEATURES_MCU_GROUP variable
2019-06-14 11:32:15 +02:00
Benjamin Valentin
849dd4cdce
sam0_common: make Timer implementation common across all sam0 MCUs
...
The currently supported SAM0 MCUs (samd21, saml21, saml1x) share the same
Timer peripheral, yet each of them carries it's own copy of the Timer
driver.
This introduces a new timer driver that is common for all sam0 MCUs and
uses structs for configuration instead of defines.
2019-05-21 11:47:59 +02:00
99962ffd15
samr21-xpro: add usbdev configuration
2019-03-26 10:26:12 +01:00
Francisco Acosta
3cf33f7b5c
boards: add riotboot feature to tested boards
...
Currently only tested boards provide the feature riotboot.
Potentially all boards embeding a cortex-m0+/3/4/7 are
able to have riotboot as a feature, but other dependencies
need to be met, e.g. usage of cortexm.ld linker script,
double initialisation of cpu_init(), etc. See doc in
bootloaders/riotboot.
2018-12-18 19:31:35 +01:00
d95e19af15
boards*: remove periph_gpio/gpio_irq provided feature
...
It is now provided at cpu level
2018-12-17 20:54:09 +01:00
cladmi
b450141d4d
boards: unconditionally include CPU/Makefile.features
...
The file always exist so no need to do '-include'.
Replaced using:
sed -i 's|-\(include $(RIOTCPU)/.*/Makefile.features\)|\1|' \
$(git grep -l '$(RIOTCPU)/.*/Makefile.features' boards)
2018-10-11 17:13:40 +02:00
Joakim Nohlgård
8996cbe313
make: Introduce new feature flag periph_gpio_irq
2018-08-29 08:53:20 +02:00
Kevin Weiss
8468fe1c94
Merge pull request #8516 from jia200x/wiki_dox_convertion
...
doc: move wiki to Doxygen documentation (second attempt)
2018-08-07 13:27:04 +02:00
Jose Alamos
7b28fbf110
boards: fix Doxygen group directives
2018-08-01 15:24:55 +02:00
Jose Alamos
a1e17ab5af
doc: add wiki documentation to Doxygen files
2018-08-01 15:24:54 +02:00
smlng
a6d4ade2c6
boards/samr21-xpro: fix attr order in i2c_config
2018-07-25 15:17:43 +02:00
dylad
93558125b5
sam0/i2c: update sam0 based periph_conf
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2018-07-25 12:01:34 +02:00
Georg von Zengen
ad78271a51
boards/samr21-xpro: add function to configure antenna switch
2018-06-26 17:59:10 +02:00
ab0d598e60
boards/samr21-xpro: fix driver params usage
2018-02-28 18:30:28 +01:00
Joakim Nohlgård
f4e9cad85a
boards: Separate boards from debug adapter configuration
2017-11-17 10:03:05 +01:00
ae51dc55d0
boards: adapt to reorganized CPU Makefile.features
2017-11-02 12:59:46 +01:00
Gaëtan Harter
05402dea29
samr21-xpro/gpio: set LED/BUTTON gpios as inverted
...
This makes LED go off when set to 0 and button reads 1 when pressed.
2017-10-05 17:19:57 +02:00
Dan Evans
531e6f5008
sam0:usart - wake from sleep on receive line
2017-09-25 12:47:31 -06:00
02e055fc81
make: include cpu Makefile.features from board Makefile.features
2017-09-14 13:15:52 +02:00
dylad
c81ae98068
boards: update periph_conf of sam0 based board
...
Signed-off-by: dylad <dylan.laduranty@mesotic.com>
2017-08-29 21:26:42 +02:00
Hauke Petersen
38395fa9bb
boards/samd21-based: fix xtimer configuration
2017-08-28 16:38:27 +02:00
Dan Evans
08224bd85a
samd21/clock: add xosc32/DFLL option
2017-06-26 10:42:23 -06:00
smlng
de948189c3
periph: generalized button macros
2017-06-20 21:19:56 +02:00
Hauke Petersen
e9fad57925
boards/samX21-xpro: enabled flashpage feature
...
done so for:
- samr21-xpro
- saml21-xpro
- samd21-xpro
2017-06-02 11:33:38 +02:00
f2cc58e8ed
boards: samr21-xpro: enable use of edbg
2017-05-24 14:52:45 +02:00
d907789c57
board: samr21-xpro: make use of shared makefiles/boards/sam0.inc.mk
2017-05-19 00:50:41 +02:00
Bumsik Kim
18f30a7d5c
boards/samr21-xpro: add adc support
2017-05-05 10:23:36 -04:00
882bcff048
boards: replace @brief with @name when necessary
2017-04-13 12:10:30 +02:00
Joakim Nohlgård
339a4da9dc
Makefiles: move to new directory /makefiles
2017-04-04 15:11:54 +02:00
Peter Kietzmann
513b20ffd3
Merge pull request #4780 from haukepetersen/opt_periph_spi2
...
drivers/spi: reworked SPI driver interface
2017-01-25 22:07:36 +01:00
Oleg Hahm
c5abb08316
Merge pull request #4058 from daniel-k/pr/gdb_threads_openocd
...
cortex_m: Add debug symbols for OpenOCD/GDB thread support
2017-01-25 17:49:42 +01:00
Hauke Petersen
ea07a6817c
cpu/sam0+boards: adapted to new SPI API
...
- adapted the SPI driver
- merged SPI driver for samr21 and saml21
- adapted all boards using the CPU
2017-01-25 16:46:45 +01:00
Oleg Hahm
7ee7801c10
*: remove trailing underscores from header guards
2017-01-19 18:30:53 +01:00
daniel-k
9d403d95ce
cortex_m: Add debug symbols for OpenOCD/GDB thread support
2017-01-16 20:50:35 +01:00
Hauke Petersen
bfb52afde9
cpu/sam21: unified structure for sam[drl]21 CPUs
2016-12-15 11:39:19 +01:00
Martine Lenders
bef0231133
Merge pull request #5891 from kaspar030/improve_module_deps
...
make: improve module dependencies
2016-10-19 12:50:37 +02:00
Hauke Petersen
93869e5e5b
boards/samr21-xpro: adapted uart and spi config
...
adjusted names for spi and uart pad selections
2016-10-07 11:09:08 +02:00
10e9336c78
boards: adapt to automatically included boards/$board/Makefile.dep
2016-09-29 15:41:12 +02:00
Kees Bakker
ea8b90fa5f
cpu/samd21: uart: now using padd setting from board config
...
Notice the extra fields in uart_conf_t for rx_pad and tx_pad.
2016-09-21 20:34:22 +02:00
Kees Bakker
845ef0decd
cpu/samd21: Refactor spi using ArduinoCore as example
...
The pinmux is now part of the board config. The pad setting is done with
clear names instead of numbers.
2016-09-21 20:34:22 +02:00
Kees Bakker
2a4655b6f8
cpu/samd21: rewrite i2c_init_master to make use of gpio_init_sercom
...
The former i2c_init_master was too complicated. It was trying to set IN/OUT
mode of the pins, but all that is needed is to set the proper MUX.
Also the configuration for the boards was incomplete (no MUX, no pad
setting).
It was tested on a SODAQ Autonomo, but not on a samr21-xpro
2016-09-21 20:34:22 +02:00
Kees Bakker
8644b5f7a0
cpu/samd21: introduce sam0.h so that we can select samr21.h or other
...
In the Makefile.include of the board it is required to set the correct
define.
Currently only SAMRG18A is supported, as required by samr21-xpro.
2016-09-21 19:43:30 +02:00
kYc0o
e443b90815
Merge pull request #5452 from locicontrols/find-tty
...
Adjust find-tty.sh to return all matches, then use it in boards/cc2538dk
2016-07-22 16:01:46 +02:00
Joakim Nohlgård
4d862955c2
xtimer: Rename XTIMER -> XTIMER_DEV
2016-07-06 22:23:04 +02:00
PeterKietzmann
9a7c67411f
boards/samr21-xpro:fix SPI_1 DIPO config
2016-07-06 09:27:25 +02:00
Ian Martin
b1946e6715
dist: tools: let find-tty.sh return all matches, not just the first
2016-05-18 15:33:01 -04:00
Oleg Hahm
8f47dcbbf8
Merge pull request #4719 from immesys/feature-samr21e
...
Add linker file for Atmel SAMR21E18A
2016-03-25 22:12:28 +01:00
Oleg Hahm
10f5f1aa33
make: introduce netif_default pseudomodule
...
Additionally the dependencies for GNRC specific modules are centralized in Makefile.dep.
2016-03-24 16:47:30 +01:00
Michael Andersen
83f9cecc12
cpu/samd21: Change linker file to support E variant
2016-03-23 16:49:24 -07:00
Martine Lenders
5bfc9e43fb
at86rf2xx: port to netdev2
2016-03-23 17:45:16 +01:00
Hauke Petersen
5996706771
boards: adapted LED initialization calls
2016-03-17 14:55:31 +01:00
Hauke Petersen
cf3a40dc5f
baords: adapted saul config to GPIO changes
2016-03-17 14:55:30 +01:00
Hauke Petersen
363b883d51
boards: fixed doxygen in msp430 and x86 board.h
2016-03-15 18:37:54 +01:00
Hauke Petersen
f0618593ba
boards/samr21-xpro: unified LED defines
2016-03-15 18:37:52 +01:00
Joakim Nohlgård
ae108581d3
boards/*/Makefile.include: replace $(shell ls) by native Makefile functions
2016-03-11 15:05:06 +01:00
Hauke Petersen
a75847ca27
baords/samr21-xpro: added third channel for PWM1
2016-02-21 16:49:45 +01:00
Hauke Petersen
fe5023b7d4
boards: adapted to HWRNG changes
2016-02-14 12:59:47 +01:00
Hauke Petersen
9988f00d7b
boards: fixed some PWM definitions
2016-02-12 16:10:01 +01:00
Joakim Nohlgård
7835ab2be7
make: Move BOARD and CPU includes to Makefile.modules
2016-02-10 16:37:03 +01:00
Joakim Nohlgård
fae9a092fd
boards: Remove Makefile.include.cortexm_common
2016-02-10 16:37:03 +01:00
Cenk Gündoğan
0d1a8393ca
saul: add user button for samr21-xpro
2016-02-04 16:35:48 +01:00
Cenk Gündoğan
b860ad3715
saul: make pull-up/pull-down mode configurable
2016-02-04 14:57:00 +01:00
Cenk Gündoğan
b751d79bf5
boards: samr21-xpro: add user button gpio
2016-02-04 13:58:03 +01:00
Hauke Petersen
b436219674
boards: removed F_CPU define from board.h
2016-01-27 09:52:44 +01:00
Hauke Petersen
db25206a58
boards: use default values for STDIO defines
2016-01-05 12:08:31 +01:00
Hauke Petersen
c8386028e0
boards/samr21-xpro: added saul to Makefile.dep
2015-12-10 14:33:33 +01:00
Hauke Petersen
ac2b9f2524
boards: changed module name to 'board'
2015-12-07 17:53:22 +01:00
Oleg Hahm
00def4f8e7
CI: split up Cortex-M0 in two groups
2015-12-07 11:38:34 +01:00
28e800d2d2
boards/samr21: add SAUL led parameters
2015-11-30 20:33:56 +01:00
test
6e51bb741f
boards: samr21-xpro: uart config cleanup
2015-11-23 15:37:56 +01:00
Hauke Petersen
004537e045
boards/samr21-xpro: use default at86rf2xx_params.h
2015-11-19 16:25:40 +01:00
Oleg Hahm
c8d89cb645
Merge pull request #3848 from haukepetersen/rm_samr21_at86defs
...
boards/samr21-xpro: rm unused radio interface defs
2015-11-18 17:12:43 +01:00
Andreas "Paul" Pauli
bf63e09a65
Merge pull request #4137 from haukepetersen/opt_samr21_pwm
...
cpu/samd21: optimized pin config for PWM driver
2015-11-05 16:14:05 +01:00
Lucas Jenss
d80f18de0b
Minor usability improvements for samr21 usage
2015-10-27 19:43:40 +01:00
Hauke Petersen
63b37640b6
s board/periph_conf: added some spaces
2015-10-27 12:28:32 +01:00
Hauke Petersen
83b322f9ce
s board: fixes
...
- moved pwm_conf[_chan]_t to periph_cpu.h
- fixed comments for channel definitions
2015-10-23 11:41:04 +02:00
Hauke Petersen
d70d59592e
boards/samr21-xpro: adjusted PWM pin configuration
2015-10-23 11:41:04 +02:00
Hauke Petersen
528e832c90
boards: cleaned up entries in Makefile.features
2015-10-21 16:45:21 +02:00
Hauke Petersen
c24028f408
boards/samr21-xpro: rm unused radio interface defs
2015-10-21 14:14:06 +02:00
Hauke Petersen
e395dfd91e
boards: s/GPIO(x,y)/GPIO_PIN(x,y)/
2015-10-13 14:59:53 +02:00
daniel-k
eb144530d8
samr21-xpro: connect to correct tty when given SERIAL
2015-09-25 17:39:09 +02:00
Thomas Eichinger
36d3d9c4cd
boards/samr21-xpro: define serial port for OS X
2015-09-21 15:04:07 +02:00
Martine Lenders
2184c97002
Merge pull request #3838 from haukepetersen/opt_samuart
...
cpu/samd21: optimized and extended UART impl.
2015-09-17 03:39:36 +02:00
8a0237e4da
board: samr21: adapt to xtimer
2015-09-16 10:58:51 +02:00
Hauke Petersen
444d9e1d76
boards/samr21-xpro: adapted and extended UART defs
...
- adapted to optimized UART implementation
- defined a 2. UART device
2015-09-14 17:20:27 +02:00
Martine Lenders
b41e31bb8a
auto_init_ng_netif: remove deprecated files
2015-08-19 17:22:54 +02:00
Martine Lenders
58ff31bfe9
gnrc: make all gnrc modules sub-modules of gnrc
2015-08-18 23:00:07 +02:00
BytesGalore
394ddb6900
drivers: renamed further remaining *NG_* macros
2015-08-12 17:21:45 +02:00
Oleg Hahm
8639d2c27d
at86rf2xx: rename remaining files and variables
2015-08-11 23:52:02 +02:00
Martine Lenders
8f9e1656e1
at86rf2xx: remove ng_ prefix
2015-08-10 00:08:21 +02:00
Hauke Petersen
bff1d7e73e
boards: remove feature 'transceiver'
2015-08-06 12:13:54 +02:00
bbf64e81ec
remove defaulttransceiver, cc110x, cc2420 traces
2015-08-06 12:13:54 +02:00
830af458ea
oldnet: remove radio_packet_length_t define
2015-08-06 12:13:18 +02:00
Hauke Petersen
b6a38b1db2
boards: removed deprecated netif initializations
2015-07-30 13:13:17 +02:00
