The CC2538-CC2592-DK is one of the few readily available and
affordable boards featuring a legacy CC2538 MCU. This should make
maintaining RIOT support for that legacy MCU more affordable :-)
Not closing a stack allocated socket before going out of scope of the
allocation is something to avoid. This fixes crashes at runtime
when adding the credentials fails.
It seems like the openthread package has some 'non-reproducible' builds
so we just disable it by renaming the app.config.test so murdock will not
pick it up.
Probably something to do with a timestamp.
19335: ipv6/nib: 6LBR should not send RS on their downstream interface r=fabian18 a=fabian18
19581: cpu/samd5x: enable FDPLL1 at 200MHz r=benpicco a=dylad
### Contribution description
This PR allows to use the second FDPLL (the first one is used to generated the 120MHz frequency used by the core and some peripherals). The second FDPLL is setup to run at 200MHz which is the maximum allowed by this MCU.
In fact, I reused the existing function which setup FDPLL0 so it can be used in a generic way for both PLL (since they are the same IP).
I change the way the computation offset (left shift by 5) is done because 200MHz << 5 wouldn't fit inside an `uint32_t` and I wanted to avoid using an `uint64_t` here
Two additional commits are present for a small cleanup and a fix.
This is currently unused in our codebase, so it shouldn't impact this platform too much as the `ONDEMAND` bit is set. the FDPLL will not be running out of the box. But `@gschorcht` might need it pretty soon.
### Testing procedure
This PR can be tested on a `same54-xpro` and an oscilloscope using the following the patch:
```
From 76490845ec72387b24116bdd364a61365c186aa1 Mon Sep 17 00:00:00 2001
From: Dylan Laduranty <dylan.laduranty@mesotic.com>
Date: Thu, 11 May 2023 17:42:16 +0200
Subject: [PATCH] removeme! for debug purpose
Signed-off-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
---
cpu/samd5x/cpu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/cpu/samd5x/cpu.c b/cpu/samd5x/cpu.c
index f778991a5b..2866c8c9e5 100644
--- a/cpu/samd5x/cpu.c
+++ b/cpu/samd5x/cpu.c
`@@` -220,7 +220,7 `@@` static void fdpll_init(uint8_t idx, uint32_t f_cpu)
}
static void gclk_connect(uint8_t id, uint8_t src, uint32_t flags) {
- GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_IDC;
+ GCLK->GENCTRL[id].reg = GCLK_GENCTRL_SRC(src) | GCLK_GENCTRL_GENEN | flags | GCLK_GENCTRL_OE | GCLK_GENCTRL_IDC;
while (GCLK->SYNCBUSY.reg & GCLK_SYNCBUSY_GENCTRL(id)) {}
}
`@@` -384,6 +384,12 `@@` void cpu_init(void)
dma_init();
#endif
+ sam0_gclk_enable(SAM0_GCLK_200MHZ);
+ /* output both FDPLL (GCLK0 and GCLK4) to gpios */
+ gpio_init_mux(GPIO_PIN(PB, 14), GPIO_MUX_M);
+ gpio_init_mux(GPIO_PIN(PB, 10), GPIO_MUX_M);
+ /* PB14 -> EXT2 PB10 -> QSPI SCK */
+
/* initialize stdio prior to periph_init() to allow use of DEBUG() there */
early_init();
--
2.35.3
```
It will output both FDPLLs to PB14 and PB10. Their frequency can then be measured using an oscilloscope.
### Issues/PRs references
None.
19612: pkg/ndn-riot: drop unmaintained pkg r=benpicco a=maribu
### Contribution description
Upstream [1] has seen no activity since 2018, so it safe to assume this is dead. It is reasonable to assume that any users - if there ever were any - have moved on.
Fixes https://github.com/RIOT-OS/RIOT/issues/15638
[1]: https://github.com/named-data-iot/ndn-riot
19643: examples/suit_update: some test fixes r=aabadie a=kaspar030
19655: net/ipv6: make use of clz in ipv6_addr_match_prefix() r=benpicco a=benpicco
Co-authored-by: Fabian Hüßler <fabian.huessler@st.ovgu.de>
Co-authored-by: Dylan Laduranty <dylan.laduranty@mesotic.com>
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Running `make` in the wasm example modifies the `hello_prebuild.wasm`
example, making it easy to sneak in unwanted changes. This reverts such
an instance and modifies the Makefile to only recreate/update
`hello_prebuild.wasm` with:
make hello_prebuild.wasm
19346: pkg/tinydtls: allow build for AVR r=benpicco a=benpicco
19512: SUBSYSTEMS.md: add jia200x to subsystems r=benpicco a=jia200x
19513: boards/nrf52840dongle/doc: Update nrfutil pointers r=benpicco a=chrysn
### Contribution description
Nordic changed its nrfutil; this change adjust to it.
I'm not fully happy with recommending that tool at all due to its bad quality (see rambling in https://github.com/RIOT-OS/RIOT/issues/19511), but short of soldering on a debug header or touch-probing it with wires it's the only way in to the device. I may later add follow-up recommendations to switch to riotboot, but this now at least fixes the immediate issue.
### Testing procedure
* Look at the updated documentation.
### Issues/PRs references
Closes: https://github.com/RIOT-OS/RIOT/issues/19511
19514: dist/testbed-support: remove obsolete boards from iotlab archi r=benpicco a=aabadie
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Jose Alamos <jose@alamos.cc>
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Alexandre Abadie <alexandre.abadie@inria.fr>
18620: core: add core_mutex_debug to aid debugging deadlocks r=maribu a=maribu
### Contribution description
Adding `USEMODULE += core_mutex_debug` to your `Makefile` results in
on log messages such as
[mutex] waiting for thread 1 (pc = 0x800024d)
being added whenever `mutex_lock()` blocks. This makes tracing down
deadlocks easier.
### Testing procedure
Run e.g.
```sh
USEMODULE=core_mutex_debug BOARD=nucleo-f767zi make -C tests/mutex_cancel flash test
```
which should provide output such as
```
Welcome to pyterm!
Type '/exit' to exit.
READY
s
[mutex] waiting for thread 1 (pc = 0x8000f35)
START
main(): This is RIOT! (Version: 2022.10-devel-841-g5cc02-core/mutex/debug)
Test Application for mutex_cancel / mutex_lock_cancelable
=========================================================
Test without cancellation: OK
Test early cancellation: OK
Verify no side effects on subsequent calls: [mutex] waiting for thread 1 (pc = 0x800024d)
OK
Test late cancellation: [mutex] waiting for thread 1 (pc = 0x0)
OK
TEST PASSED
```
```sh
$ arm-none-eabi-addr2line -a 0x800024d -e tests/mutex_cancel/bin/nucleo-f767zi/tests_mutex_cancel.elf
0x0800024d
/home/maribu/Repos/software/RIOT/tests/mutex_cancel/main.c:51
```
### Issues/PRs references
Depends on and includes https://github.com/RIOT-OS/RIOT/pull/18619
19296: nanocoap: allow to define CoAP resources as XFA r=maribu a=benpicco
19504: cpu/cc26xx_cc13xx: Fix bogus array-bound warning r=maribu a=maribu
### Contribution description
GCC 12 create a bogus array out of bounds warning as it assumes that because there is special handling for `uart == 0` and `uart == 1`, `uart` can indeed be `1`. There is an `assert(uart < UART_NUMOF)` above that would blow up prior to any out of bounds access.
In any case, optimizing out the special handling of `uart == 1` for when `UART_NUMOF == 1` likely improves the generated code and fixes the warning.
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:88:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
88 | ctx[uart].rx_cb = rx_cb;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:89:8: error: array subscript 1 is above array bounds of 'uart_isr_ctx_t[1]' [-Werror=array-bounds]
89 | ctx[uart].arg = arg;
| ~~~^~~~~~
/home/maribu/Repos/software/RIOT/cc2650/cpu/cc26xx_cc13xx/periph/uart.c:52:23: note: while referencing 'ctx'
52 | static uart_isr_ctx_t ctx[UART_NUMOF];
| ^~~
### Testing procedure
The actual change is a pretty obvious one-liner, so that code review and a green CI should be sufficient. If not, running any UART example app without regression should do.
### Issues/PRs references
None
19506: tools/openocd: Fix handling of OPENOCD_CMD_RESET_HALT r=maribu a=maribu
### Contribution description
The OPENOCD_CMD_RESET_HALT was not longer correctly passed to the script. This fixes the issue.
### Testing procedure
Flashing of e.g. the `cc2650-launchpad` with upstream OpenOCD should work again.
### Issues/PRs references
The change was added to https://github.com/RIOT-OS/RIOT/pull/19050 after testing the PR and before merging. I'm not sure if the fix never worked because of this, or if behavior of `target-export-variables` or GNU Make changed.
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
19485: sys/shell: Fix missing dependency r=aabadie a=maribu
### Contribution description
The shell commands depend on the shell module being use. This was already the case in KConfig, but was overlooked in the shell's `Makefile.dep`.
In addition, this uncovered that `tests/memarray` had a bogus dependency on shell commands without every using the shell.
### Testing procedure
Ideally binaries should not differ (except for debug section).
### Issues/PRs references
Split out of https://github.com/RIOT-OS/RIOT/pull/19483
Co-authored-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
19321: examples/gnrc_border_router: add BLE as downlink option r=benpicco a=benpicco
19325: esptools/install.sh: Fix shellcheck issues r=benpicco a=bergzand
### Contribution description
Quote all the things!
### Testing procedure
The script should still work as before
### Issues/PRs references
None
19327: shell/cmds: GNRC: replace puts() with printf() r=benpicco a=benpicco
19328: pkg/u8g2: bump version r=benpicco a=benpicco
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Koen Zandberg <koen@bergzand.net>
Co-authored-by: Benjamin Valentin <benpicco@beuth-hochschule.de>
The telnet example prints a line to the console, but it is not ended
with a newline. When using pyterm, the last line is then never shown as
it reads the console line by line and is waiting for the end of the
line.
This patch swaps use of `printf` for `puts` for the last line printed.
This means the missing newline character gets added. This is also done
to be consistent with the rest of the file, where puts is used whenever
possible instead of printf.
19294: sys/shell: don't include suit command by default r=benpicco a=benpicco
19295: gcoap: Finish the gcoap_get_resource_list_tl -> gcoap_get_resource_list renaming r=benpicco a=chrysn
### Contribution description
In #16688, an argument was added to the `gcoap_get_resource_list` function by creating a new function `gcoap_get_resource_list_tl` with a deprecation and roll-over plan.
This plan has not been acted on so far.
This PR shortens the original plan by just adding the argument to `gcoap_get_resource_list` and removing `gcoap_get_resource_list_tl` in a single go. The rationale for this deviation is that while it's a public API, its only two practical consumers are the (built-in) well-known/core implementation, and the (built-in) CoRE Resource Directory (cord) endpoint. Moreover, a further change to this API (switching over to `coap_block_slicer_t`) is expected to happen within this release cycle, which would take something like 4 total releases to get through otherwise, which is unrealistic for an API that there are no known external users of.
A second commit clean up ToDo items (in the changed function's documentation) that referred to a IETF draft that has long been abandoned by the CoRE WG.
### Testing procedure
Plain inspection and CI passing should suffice.
### AOB
There is a second analogous pair left over from #16688, `gcoap_req_send` / `gcoap_req_send_tl`. As that *is* expected to be used widely, I prefer not to mix these two concerns, and get the present one through without unnecessary hold-up.
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
Co-authored-by: chrysn <chrysn@fsfe.org>
19256: pkg/tinyusb: add GD32VF103 support r=gschorcht a=gschorcht
### Contribution description
This PR provides the tinyUSB support for GD32VF103 and enables the `tinyusb_device` feature as well as `stdio_tinyusb_cdc_acm` for GD32VF103 boards.
### Testing procedure
```
BOARD=sipeeed-longan-nano make -C tests/shell flash term
```
should work
### Issues/PRs references
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
* riot-wrappers:
* Fix infinite loop when using a Mutex
* Make ValueInThread Copy/Clone
* riot-sys:
* Export xxx_DEV (eg. I2C_DEV) C macros as functions
* Add auto_init_utils.h
19193: rust: Update dependencies, use riot-wrappers from git r=benpicco a=chrysn
### Contribution description
As riot-wrappers has advanced a bit since it was last released, Rust modules are switched to using it from git again. (This is a regular ping-pong between testing the latest release in RIOT master, and using released support crates when they're current).
This primarily updates riot-wrappers, which has accumulated several compatible changes. Several other crates receive updates as well.
### Testing procedure
* Green CI
### Issues/PRs references
Changes on the riot-wrappers side:
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/17
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/22
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/29
* https://github.com/RIOT-OS/rust-riot-wrappers/pull/30
[edit: added:]
This also serves to help preparing a 0.8.1 release of riot-wrappers, which performs some deprecations so that a breaking 0.9 change can be done more effortlessly later on.
19214: cpu/gd32v: add periph_spi support r=benpicco a=gschorcht
### Contribution description
This PR provides the `periph_spi` support and is one of a bunch of PRs that complete the peripheral drivers for GD32VF103.
The driver is a modified version of the driver for STM32F1 with some changes that were necessary to get it working on GD32V.
### Testing procedure
`tests/periph_spi` as well as a test with any SPI sensor should work. `tests/driver_sdcard_spi` should work on `sipeed-longan-nano`.
### Issues/PRs references
Depeneds on PR #19216
Co-authored-by: chrysn <chrysn@fsfe.org>
Co-authored-by: Gunar Schorcht <gunar@schorcht.net>
18477: gnrc_static: add static network configuration r=miri64 a=benpicco
19101: CI: update check-labels-action r=miri64 a=kaspar030
19155: Revert "sys/pm_layered: pm_(un)block add attribute optimize(3)" r=maribu a=Teufelchen1
Revert "sys/pm_layered: pm_(un)block add attribute optimize(3) -shortens hotpath"
This reverts commit 5447203921.
### Contribution description
Compiling `examples/gnrc_networking_mac` using `TOOLCHAIN=llvm` yields the following error:
```
RIOT/sys/pm_layered/pm.c:77:16: error: unknown attribute 'optimize' ignored [-Werror,-Wunknown-attributes]
__attribute__((optimize(3)))
```
As indicated, this is because the attribute `optimize` is GCC only and not present in LLVM.
Compare the manpages of [GCC](https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html) and [LLVM](https://clang.llvm.org/docs/AttributeReference.html).
### Testing procedure
Since this should only affect performance and not behavior, no special testing is needed. I am not aware of any tests in RIOT which could verify that assumption.
### Issues/PRs references
Introduced in #18846
There is another instance of this attribute being used in[ shell_lock.c](6fb340d654/sys/shell_lock/shell_lock.c (L80)). Since the usage is security related, I omit it from this PR.
Co-authored-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
Co-authored-by: Kaspar Schleiser <kaspar@schleiser.de>
Co-authored-by: Teufelchen1 <bennet.blischke@haw-hamburg.de>
Executing the shell command with an URI-Path that doesn't start with a
slash results in an assertion error while composing the client side
message. This is suboptimal user experience, so add an explicit check
for a valid URI-Path and a dedicated error message.
The space inside the expression made the ifneq always non-equal; the
intended behavior is "if we're using any of these interfaces, or
REUSE_TAP is set".
18962: pkg/lwip: Force loglevel when using log module r=maribu a=yarrick
18999: Paho: Allow building for 8 and 16 bit platforms r=maribu a=OlegHahm
### Contribution description
Providing a patch to Paho upstream which uses fixed size integers (int32_t) instead of plain int whenever it is used to represent a size of an object.
This patch will allow to build the Paho package for platforms where an integer has a width of less than 32 bit.
This patch is also provided as a PR to the upstream version of Paho (https://github.com/eclipse/paho.mqtt.embedded-c/pull/238) but unfortunately the upstream seems to be unmaintained.
### Testing procedure
Build for a 8 or 16 bit platform that has enough memory for the example, e.g., https://api.riot-os.org/group__boards__atxmega-a1u-xpro.html:
BUILD_IN_DOCKER=1 BOARD=atxmega-a1u-xpro make clean all
Without this PR this build will fail, with the patches applied it will succeed.
### Issues/PRs references
This PR makes #18997 obsolete and thus reverts the change.
19034: boards/nucleo-l496zg: doc improvement r=maribu a=krzysztof-cabaj
### Contribution description
This PR adds to nucleo-l496zg documentation MCU table - similar to those, for example for, Nucleo F103RB, F302R8 or F446RE.
### Testing procedure
```
make doc
xdg-open doc/doxygen/html/group__boards__nucleo-l496zg.html
```
### Issues/PRs references
None
Co-authored-by: Erik Ekman <eekman@google.com>
Co-authored-by: Oleg Hahm <oleg@hobbykeller.org>
Co-authored-by: krzysztof-cabaj <kcabaj@gmail.com>
19024: pkg/paho-mqtt: add support for DNS r=aabadie a=benpicco
<!--
The RIOT community cares a lot about code quality.
Therefore, before describing what your contribution is about, we would like
you to make sure that your modifications are compliant with the RIOT
coding conventions, see https://github.com/RIOT-OS/RIOT/blob/master/CODING_CONVENTIONS.md.
-->
### Contribution description
This is pretty straightforward, we only need to hook up `dns_query()`.
Since paho supports both IPv4 and IPv6 we use `AF_UNSPEC` in the query.
This can however give us a A record if we only have IPv6 enabled, so translate the request based on what IP address module is enabled in `dns_query()`.
### Testing procedure
connecting by name works
```
> con test.mosquitto.org 1883
mqtt_example: Connecting to MQTT Broker from test.mosquitto.org 1883
mqtt_example: Trying to connect to test.mosquitto.org , port: 1883
user: clientId: password:
mqtt_example: Connection successfully
```
connecting by IP still works
```
> con 2001:41d0:1:925e::1 1883
mqtt_example: Connecting to MQTT Broker from 2001:41d0:1:925e::1 1883
mqtt_example: Trying to connect to 2001:41d0:1:925e::1 , port: 1883
user: clientId: password:
mqtt_example: Connection successfully
```
<!--
Details steps to test your contribution:
- which test/example to compile for which board and is there a 'test' command
- how to know that it was not working/available in master
- the expected success test output
-->
### Issues/PRs references
<!--
Examples: Fixes#1234. See also #5678. Depends on PR #9876.
Please use keywords (e.g., fixes, resolve) with the links to the issues you
resolved, this way they will be automatically closed when your pull request
is merged. See https://help.github.com/articles/closing-issues-using-keywords/.
-->
Co-authored-by: Benjamin Valentin <benjamin.valentin@bht-berlin.de>
`coap_build_reply()` may return negative values on error or
0 in the no-response case.
Don't use it to calculate a payload offset without checking first.
This eliminates race conditions around unregistering netdevs.
gnrc_netreg_lookup-style functions perform a DEVELHELP check on whether
that lock is held.
The change in 399e25cc was did not have the intended effect: As the
local crates still all defined 0.7 as the riot-wrappers version, that
dependency was actually down- rather than upgraded, and thus did not
effect the stabilizations.
This pulls in versions of previously nightly-only crates that can be
built on 1.65 beta.
The Cargo overrides that direct the resolver to the git repositories are
disabled while the version used in tree also happens to be a released
version of the crates, as it should be the case as per [251].
[251]: https://github.com/RIOT-OS/Release-Specs/issues/251
This will allow more components to build on 1.64 stable, and contains a
fix relevant for https://github.com/RIOT-OS/RIOT/pull/18619.
CoAP modules are held back as they appear to need an even newer nightly
than in the current riotdocker to build without feature declarations.
Previously `shell_commands` was a "catch-all" module that included
shell commands for each and every used module that has a shell
companion. Instead, the new `shell_cmds` module is now used to provide
shell commands as individually selectable submodules, e.g.
`cmd_gnrc_icmpv6_echo` now provides the ICMPv6 echo command (a.k.a.
ping).
To still have a "catch all" module to pull in shell commands of modules
already used, `shell_cmds_default` was introduced. `shell_commands`
depends now on `shell_cmds_default` for backward compatibility, but
has been deprecated. New apps should use `shell_cmds_default`
instead.
For a handful of shell commands individual selection was already
possible. Those modules now depend on the corresponding `cmd_%` module
and they have been deprecated.
This will ignore files named `core` and `core.*` (except `core.c`,
`core.h`, `core.md`, `core.txt`) placed directly in the application
folder. This is where `make` is typically called and core dump due to
a crashing native application, flashing tool, or GDB would be placed.
The pattern is intentionally quite narrow, as there is e.g. a core
source folder that should still be monitored.
File systems should be mounted via `vfs_default`, not manually by
the application.
Also, `vfs` gained the `format` sub-command, so no need to provide
it in the example application.
A change in Rust nightly features broke version 0.2.5 of the `cstr`
crate, whose nightly-only features are enabled in some examples. The
breakage was quickly fixed upstream in the 0.2.6 version, this updates
the locks.
The riotmodules dependency was missed in bc8ec6d5, and while generally
it does not severly harm builds, it does harm builds riotdocker CI where
branches are switched, which is blocked by dirty files in the checkout.
The riot-wrappers version was missed when what is now 5e75f4bd was
rebased onto fdc4e11a.
d424aaedac introduced address families to
the RIOT interpretation of tinydtls-`session_t`s. However, while fixing
the naming for the `addr` field, it did not set the `family` member for
the sessions in the `dtls-echo` example, having that example run into [an
assertion][1]. This patch fixes that.
[1]: bda40789a7/session.c (L146)
The last element of a JSON array must not be terminated with a `,`
character. As such, the configuration documented currently in the
`README.md` file of gnrc_border_router is invalid and rejected by
Kea.
Examples have previously relied on the (really: some) nightly toolchain
to be the default. As that, in practice, is a problematic assumption,
the latest toolchain to use is now determined programmatically, and that
is set explicitly on the examples that use nightly.
Workaround-For: https://github.com/rust-lang/rustup/issues/3015
Add `esp32-ci` and `esp8266-ci` as external boards to cover optional modules by CI compilation:
- examples/gnrc_networking to cover ESP32/ESP8266 `esp_wifi_ap`
- examples/gnrc_minimal to cover ESP32 `esp_wifi_enterprise`
